Fujitsu Printer FTP 641MCL351 User Manual

24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER  
4” MECHANISM, WITH AVAILABLE CUTTER  
FTP-641MCL351/352  
OVERVIEW  
This thermal printer (driven by 24 VDC) and cutter provide high  
speed printing for 4-inch wide paper (114 mm). This printer is small  
in size, light weight, and has low power consumption. The print  
head features open construction for easy maintenance.  
This printer is suitable for a variety of applications, such as POS  
terminals, ticket machines, label printers, measuring devices and  
medical equipment.  
In addition to the interface board, a driving LSI (MCU + Gate Array)  
is also available.  
FTP-641MCL351/352 shown after  
assembly with FTP-641CT001cutter  
HIGHLIGHTS  
• Ultra high speed printing  
It can print at 100 mm/s (800 dotlines/s) by using Fujitsu  
Components' unique head drive control system.  
• Auto cutter  
Full or partial cutting are available by normal or reverse rotation  
of the motor (command set).  
• Low power consumption  
The peak current for head driving is approximately 3.3 A (at 50  
mm/s printing speed, 50% printing ratio).  
FTP-621CU102, FTP-633GA101  
• Easy head access  
Head-open construction makes head maintenance easy,  
especially for head cleaning.  
• Paper auto loading function  
The thermal paper can be loaded without head-up lever  
operation.  
• High resolution  
8 dots/mm head provides clear print output.  
• Selectable paper paths  
Front or rear insertion types are available.  
FTP-621DCL013  
1
 
FTP-641MCL351/352  
(Continued)  
Item  
Specifications  
24 VDC ± 5%, average:*2  
0.82 (1.11) A (at 25 mm/s printing speed, 25% printing ratio)  
1.25 (1.66) A (at 50 mm/s printing speed, 25% printing ratio)  
4.75 (6.30) A (at 50 mm/s printing speed, 100% printing ratio)  
For head  
(
): Peak  
Power supply  
For motor  
For logic  
24 VDC ± 5%, 1.0 A maximum  
5 VDC ± 5%, 0.5 A maximum  
Weight  
Mechanism with cutter: approximately 610 g  
Interface board: approximately 100 g  
Mechanism + cutter  
Interface board  
159 (W) × 60 (D) × 71.0 (H) mm (excluding connector)  
140 (W) × 89 (D) × 24.0 (H) mm  
Dimensions  
Pulse durability : 5 × 107 pulse/dot (using Fujitsu & Takamisawa's  
standard driving method)  
Wear resistance : 50 km (at 12.5% printing ratio)  
Thermal head  
Life  
Cutter  
Cutting life: 3 × 105 times  
Operating temperature  
Operating humidity  
Storage temperature  
Storage humidity  
Head temperature  
Paper out/Mark detect  
Head-up  
+5 to +40°C*3  
20 to 85% RH (no condensation)  
–20 to +60°C (excluding paper)  
5 to 95% RH (no condensation)  
By thermistor (applied energy control, abnormal temperature detection)  
By photointerrupter (command set)  
By microswitch  
Environmental  
conditions  
Detection  
Paper width  
114+0  
1 ply paper in roll  
–1  
mm  
Recommended thermal sensitive  
paper*4  
:
FTP-040P0020  
*1: The data to be printed is automatically read out by the printer driver equipment memory (host system frame  
memory). The communication is parameter transfer.  
*2: At 25°C, maximum applied voltage, minimum head resistance, specified paper, stable printing ratio.  
*3: Temperature range for guaranteed printing density. It can operate at 0 to +40°C.  
*4: Please contact us for other thermal papers.  
3
 
FTP-641MCL351/352  
DIMENSIONS  
Printer mechanism with cutter  
1 1 . 8  
2.5 (Mounting hole)  
JAPAN  
25.4  
35.5 (Mounting hole)  
68 (At cutter open)  
7.5 (300)  
40.5  
1 2  
60  
Unit: mm  
4
 
FTP-641MCL351/352  
Interface board  
139.7  
129.6  
113.1  
22.9  
14.0  
22.3  
27.4  
4—ø3.6  
(5.1)  
CN3  
CN4  
CN12  
CN13  
CN2  
CN7  
88.9  
78.8  
28.0  
CN11  
25.4  
CN5  
CN6  
CN1  
CN10  
(5.1)  
(5.1)  
(5.1)  
(5.1)  
14.0  
31.8  
15.3  
88.9  
17  
Height of devices side  
Height of solder side  
23.6  
1.6  
5
Unit: mm  
INTERFACE, COMMAND, OPTIONS  
Please refer to the FTP-621DCL003/013 DATA SHEET for Interface, Command, and Options.  
5
 
FTP-641MCL351/352  
Europe  
Japan  
Fujitsu Components Europe B.V.  
Diamantlaan 25  
2132 WV Hoofddorp  
Netherlands  
Fujitsu Component Limited  
Gotanda-Chuo Building  
3-5, Higashigotanda 2-chome, Shinagawa-ku  
Tokyo 141, Japan  
Fujitsu Components  
International  
Headquarter  
Offices  
Tel: (31-23) 5560910  
Fax: (31-23) 5560950  
Tel: (81-3) 5449-7010  
Fax: (81-3) 5449-2626  
Asia Pacific  
North and South America  
Fujitsu Components America, Inc.  
250 E. Caribbean Drive  
Sunnyvale, CA 94089 U.S.A.  
Tel: (1-408) 745-4900  
Fujitsu Components Asia Ltd.  
102E Pasir Panjang Road  
#04-01 Citilink Warehouse Complex  
Singapore 118529  
Tel: (65) 375-8560  
Fax: (1-408) 745-4970  
Fax: (65) 273-3021  
© 2001 Fujitsu Components America, Inc. All company and product names are trademarks or registered  
trademarks of their respective owners. Rev. 09/2001  
6
 

Eagle Electronics Pager PG 2091F User Manual
Echo Bear Cat Chipper CH8540 71854 User Manual
Euro Pro Vacuum Cleaner UV209H User Manual
Extron electronic Stereo System MHRVGA User Manual
Fender Guitar 015 0082 User Manual
Fujitsu VCR PG DTA101 User Manual
Gateway Personal Computer GT4015H User Manual
Gemini Car Amplifier XGA 2000 User Manual
Gigabyte Computer Accessories GA 7VAC User Manual
GM Automobile Pontiac Aztek User Manual