Edelbrock Camera Accessories 4779 User Manual

SECONDARY FUEL RAIL  
For B-Series Honda Performer X Intake Manifolds  
Catalog #4779  
®
INSTALLATION INSTRUCTIONS  
PLEASE study these instructions carefully before beginning this installation. Most installations can be accomplished with common tools and  
procedures. However, you should be familiar with and comfortable working on your vehicle. If you do not feel comfortable performing this  
installation, it is recommended to have the installation completed by a qualified mechanic. If you have any questions, please call our Technical  
Hotline at: 1-800-416-8628, 7:00 am - 5:00 pm, Pacific Standard Time, Monday through Friday or e-mail us at [email protected].  
NOTE: Proper installation is the responsibility of the installer. Improper installation may result in poor performance and engine or vehicle damage.  
PLEASE complete and mail your warranty card. Be sure to write the model number of this product in the "Part #____" space. THANK YOU.  
Description: The Edelbrock Secondary Fuel Rail kit for the Performer X intake manifold allows the use of secondary fuel injectors on  
Performer X manifolds, 4771, 4774, and 4778, for turbocharged, alcohol-fueled, or nitrous oxide applications, where additional injectors are  
needed. Performer X manifolds must use PICO-style secondary fuel injectors.  
Kit Contents:  
1 Secondary fuel rail  
2 1/4-20 x 1.25” bolts  
2 1/4” AN washer  
2 1/4” Star washer  
2 3/8” NPT x -6 AN Adapter fittings  
NOTE: If the intake manifold is on the engine, it must be removed before attempting to install the Secondary Fuel Rail. Drilling  
of the injector bosses is required, and metal chips could get into the engine if intake manifold is not removed prior to drilling.  
Refer to your intake manifold installation instructions, or your factory service manual for proper removal procedure.  
WARNING: When working around gasoline or with any fuel system, always work in a well-ventilated area. Keep all sparks,  
open flames, or other sources of ignition away from the work area. Failure to do so could result in a fire or explosion causing  
vehicle or property damage, personal injury, and/or death.  
INJECTORS: Performer X intake manifolds require the use of a Pico-style fuel injector (See Fig. 1). See chart below for recommended  
Edelbrock fuel injectors. Select the size that is appropriate for your particular application.  
FUEL INJECTOR  
#3574  
DESCRIPTION  
19 lbs/hour @ 44 psi (185cc/min)  
29 lbs/hour @ 44 psi (281cc/min)  
35 lbs/hour @ 44 psi (340cc/min)  
44 lbs/hour @ 44 psi (427cc/min)  
#3583  
#3635  
#3685  
Figure 1 - Pico-Style Fuel Injector  
Catalog #4779  
Rev.10/05 - RS/mc  
©2005 Edelbrock Corporation  
Brochure #63-0463  
Page 1 of 2  
 

EverFocus Security Camera EHD360 User Manual
Fisher Paykel Cooktop CG602 User Manual
Focal Car Speaker 570 CA1 User Manual
FujiFilm Digital Camera 16437542 User Manual
Fujitsu Scanner P2WW 2300 01ENZ0 User Manual
Garmin GPS Receiver zumo 550 User Manual
GE Dishwasher PDWT400RBB User Manual
GE IP Phone JGB908SEL User Manual
GE Microwave Oven PEM31SMSS User Manual
GE Washer Dryer WCXH208 User Manual