Dynex Modem 2300 0248 User Manual

Part 3. Software Installation  
Double click on “Control Panel/Modems”, select the “don't  
detect my modem; I will select it from a list” option and  
press the “Next” button.  
Installing the Fax/Modem software  
The communications software which is included with this  
product comes with its own user's instructions located in the  
readme file. This software will enable you to use your  
modem in both data and fax modes.  
Click on the “Have Disk” button from “Install New Modem”  
window and press the “Next” button.  
Windows then asks you to specify where the driver for the  
modem is located. Insert the fax modem drivers diskette  
into your floppy drive, select drive “A:\” and click “OK”.  
Using Third Party Modem Communication Software  
The PC Card fax modem is designed to work with the  
software included with the modem. In addition, the modem  
will operate with most other third-party DOS and Windows  
data fax software applications. Please note the following  
when configuring your fax modem with third-party software.  
Select the product name of fax modem from “Models” list  
box and press the “Next” button.  
Select the available COM port from the list box and press  
the “Next” button.  
You will see the “Your modem has been set up  
successfully” window appear. That means the modem is  
now ready for use.  
Many data communication programs require that you select  
a modem during installation. If you do not see a listing for  
this Fax Modem, you should select “Generic Fax Modem” or  
“Standard Fax Modem” as your modem type.  
If you are installing a fax program, it may ask you what Class  
of fax modem you have. You should respond by selecting  
“Class 1” or Class 2” (optional, please refer to your User's  
Manual).  
Note: Windows will notify you that the driver has not passed  
Windows Logo testing. This is normal, and it has been  
verified that the Adapter does work with Windows XP.  
Click Continue Anyway.  
6
5
FCC Certifications  
This device complies with Part 15 of the FCC rules. Operation  
is subject to the following two conditions:  
(1) This device may not cause harmful interference, and (2)  
This device must accept any interference received, including  
interference that may cause undesired operation.  
CE Mark Warning  
This is a Class B product. In a domestic environment, this  
product may cause radio interference.  
Installation Guide  
PCMCIA 56K Data/Fax Modem  
Model No.: DX-M200  
P/N: 2300-0248  
7
 

Cobra Electronics Marine Battery CPI 875 User Manual
Contemporary Research Network Hardware ICC ICW HE User Manual
Cooper Lighting Home Safety Product CU1 User Manual
Craftsman Cultivator 31629256 User Manual
Cub Cadet Snow Blower 721E User Manual
Delta Electronics Power Supply TAP CP01 User Manual
Dimplex Cooktop EOS2006 User Manual
Dynex Mouse DX WLM 1401 BK DX WLM1401 SV DX WLM1401 BU User Manual
Everpure Water System Quad XC User Manual
Geemarc Telephone Ampli DECT150 User Manual