Crown Equipment Lawn Mower TR 3600 User Manual

C
Specifications  
TR 3600 Series  
Tow Tractor  
TR 3600  
Series  
 
Specifications  
TR 3600 Series  
1
2
3
Manufacturer  
Model  
Crown Equipment Corporation  
TR 3600  
200*  
635  
Drawbar Pull  
Normal  
lb  
lb  
Maximum  
4
5
6
7
8
9
Rolling Load Capacity  
Overall Length  
Wheelbase  
lb  
10,000  
60.3  
38  
in  
in  
Turning Radius  
Grade Clearance  
Travel Speeds  
in  
48.3  
27  
%
Empty  
mph  
mph  
lb  
9.0**  
6.0**  
1280  
Loaded  
10 Truck Weight  
* 12" hitch height.  
**Power unit first travel only.  
Adjustable Hitch Plates  
Hitch plate allows all types of hitches to be adjusted in 1.75" increments.  
Hitch  
Hitch Heights  
Minimum  
8"  
Maximum  
15"  
Automatic  
Pintle  
8.62"  
8.75"  
7.88"  
15.62"  
15.75"  
16.62"  
Eye  
Pin & Clevis  
6"  
C/L  
6.12"  
4.5"  
3.38"  
5"  
.52"  
.52"  
2.5"  
3.38"  
.52"  
5"  
3.38"  
.52"  
3.38"  
1.75"  
3"  
1.5"  
1"  
1.75"  
5.25"  
2.88"  
2.75"  
1.75"  
3.75"  
3.75"  
2.75"  
2.5"  
5.81"  
3.62"  
2"  
2.25"  
11"  
1.25"  
Automatic  
Pintle  
Eye  
Pin & Clevis  
Technical Information  
TR 3600 Series  
Maximum Battery Size  
13.19" wide x 31.12" long x  
31.62" high  
Standard Equipment  
8. Padded back cushion  
12. 175 amp battery connector  
13. Key switch  
1. 24-volt fused electrical system  
9. Orange polyurethane  
trail wheels  
2. Coupler  
14. Horn  
Batteries  
24-volt, 750 amp hour, 21.5 Kwh  
Min/Max weight 975/1500 lb  
3. Curtis transistor control  
4. InfoPoint® Quick Reference  
Guide and Maps  
10. Black polyurethane drive tire  
15. Lift-off left and right battery  
retainers  
11. Standard control handle  
includes full width twist grip  
with cams and full width horn  
button. The optional “T” type  
control handle with full width  
twist grips with cams, dual  
brake levers and parking  
brake lever.  
support diagnostics  
5. Short battery wall (use with  
23.38" tall battery)  
6. 27.5" wide backrest  
7. 42" tall backrest  
 
Technical Information  
TR 3600 Series  
Optional Equipment  
1. Curtis Spyglass (discharge  
indicator with high speed  
Where walking through the  
compartment is common,  
the larger compartment, low  
profile high speed pedal,  
rounded edges and optional  
backrest width and heights  
help walk-through.  
Electrical System  
Brake  
Heavy-duty, 24-volt electrical  
system for demanding ware-  
house applications. The new  
1404C separately excited  
traction control integrates many  
of the operating features to  
provide excellent control and  
reliability. Directional contactors  
are eliminated, while traction  
speeds have been improved  
for optimum productivity.  
Internal expanding mechanical  
brake with fin-cooled 6" drum.  
Braking on the TR is actuated by  
moving the control handle into  
the brake range. Braking on TR  
with optional “T” type handle is  
actuated by two brake levers on  
the control handle.  
travel lockout and hour meter)  
2. Hour meter  
3. Molded urethane leg cushion  
(battery wall mount)  
The low profile high speed  
pedal prevents the operator  
from stepping up and over  
the pedal. When the pedal is  
engaged, it is approximately  
flush with the platform cushion  
for maximum comfort.  
4. Suspended operator  
platform with molded  
Other Options  
1. Audible travel alarm  
urethane platform cushion  
5. Tall battery wall (use with  
31.62" tall battery)  
Crown-manufactured, separately  
excited, high-torque drive  
motor is application designed  
for reliability and ease of service.  
Color-coded wiring is also  
used for ease of service.  
2. Flashing lights  
6. 22.5" wide backrest  
Safety considerations and  
dangers associated with  
audible travel alarms and  
flashing lights include:  
7. 59" or 71" high backrest  
All operator contact points are  
rounded to prevent snagging  
of operators clothes or job  
related items.  
8. Storage tray and bin located  
in backrest  
• Multiple alarms and/or lights  
can cause confusion.  
9. Storage module on battery  
(23.38" high battery only)  
Drive Unit  
All gear drive from drive motor  
to drive wheel axle. Drive tire  
axle is mounted in the drive unit  
on both sides for maximum  
strength in rough floor applica-  
tions. Drive unit is top and  
bottom mounted. Top mount is  
a large taper roller bearing for  
vertical or horizontal forces.  
Bottom mount has four shock  
mounted rollers on drive unit  
running in a hardened steel  
roller race. Gear train runs in  
oil-filled, sealed housing.  
Optional width and height  
• Workers ignore the alarms  
and/or lights after day-in and  
day-out exposure.  
10. Battery compartment rollers  
backrests can be specified for  
your application. Hip, shoulder  
and elbow clearance are  
maximized when this feature is  
customized to your application.  
11. Battery retainer  
interlock switch  
• Operator may transfer the  
responsibility for “looking out”  
to the pedestrians.  
12. Quick battery disconnect  
handle (SB 175 and right  
side only)  
A large back cushion is  
standard to minimize fatigue  
when the operator is in the  
transport position. An optional  
suspended floor and floor  
cushion reduces vibration  
and shock to the operators  
feet and legs.  
• Annoys operators and  
pedestrians.  
13. Left side battery connector  
(facing power unit doors)  
Dimensions and performance  
data given may vary due to  
manufacturing tolerances.  
Performance is based on an  
average size vehicle and is  
affected by weight, condition of  
truck, how it is equipped and  
the conditions of the operating  
area. Crown products and  
specifications are subject to  
change without notice.  
14. Drive tire and trail  
wheel options  
15. Toggle switch in lieu of key  
16. Freezer and corrosion  
conditioning  
Wheels and Tires  
The TR has the standard  
Drive tire, 13" diameter x 4.5"  
wide x 8" hub polyurethane.  
Trail wheels, 7" diameter x 5"  
wide rubber or polyurethane.  
17. Special color paint  
control handle with full width  
twist grips with cams and a full  
width horn button. The TR has  
an optional 24" wide “T” type  
control handle, with full width  
twist grips with cams, dual  
brake levers and a parking  
brake lever. On the control pod  
is a full width horn button for  
easy actuation. Dual brake  
levers and parking brake are  
positioned and shaped for  
maximum comfort.  
18. Automatic coupler with  
“Quick Release”  
19. “T” type control handle with  
full width twist grips with  
cams, dual brake levers and  
parking brake lever.  
Power Unit Structure  
Rugged steel doors are  
suspended on heavy-duty pin  
hinges. Doors swing wide for  
good access. Doors can also  
be lifted off for unrestricted  
service access. Door bolts  
have exclusive convex design  
that mates with concave door  
holes for fast reinstallation of  
bolts. Heavy steel skirt surrounds  
entire area.  
Operator Area and Controls  
The TR 3600 Series incorporates  
a comfortable operator compart-  
ment to increase productivity.  
Rounded edges and careful  
placement of operator contact  
points make the TR 3600 Series  
user-friendly.  
Many optional features for the  
operator area and controls are  
available to suit a wide range of  
applications.  
A larger operator platform allows  
quick entry/exit onto the truck.  
Crown Equipment Corporation  
New Bremen, Ohio 45869 USA  
Tel 419-629-2311  
C
Fax 419-629-3796  
crown.com  
Because Crown is continually improving its products,  
specifications are subject to change without notice.  
Crown, the Momentum symbol and InfoPoint are  
trademarks of Crown Equipment Corporation.  
Copyright 2006 Crown Equipment Corporation  
SF14641 3/06  
Printed in U.S.A.  
 

Conair Styling Iron CS86 User Manual
Cooper Lighting Work Light IMI 6950 User Manual
Corinex Global Network Card ETS 300 328 User Manual
Cortelco Cordless Telephone 9125 User Manual
Craftsman Lawn Mower 38820 User Manual
Cuisinart Blender CH 4 User Manual
Dual Stereo System XD6320 User Manual
Dynacord Portable Speaker M 12 User Manual
Dyson Vacuum Cleaner DC 31 User Manual
Garmin All in One Printer NX200 User Manual