Cooper Lighting Indoor Furnishings CR Series User Manual

®
COOPER LIGHTING - METALUX  
DESCRIPTION  
DIMENSIONS  
The CR Series corridor  
wraparound features economy  
and energy efficient  
performance. CR luminaires  
utilizes a low brightness,  
extruded acrylic refractor with a  
heavy gauge end plate with  
embossed light seal for  
dependable performance and  
good looks. The CR Series is the  
perfect complement  
wraparound for corridors,  
stairwells, small office areas,  
commercial spaces, dormitories,  
and utility lighting.  
NOMINAL  
LENGTH  
A
B
C
D
CR SERIES  
4'/8'  
6-1/8" (156mm)  
4-5/8" (118mm)  
5-5/16" (135mm)  
4-1/4" (108mm)  
4' or 8' Surface  
1 or 2 Lamps  
SURFACE CORRIDOR  
MOUNT  
ORDERING INFORMATION  
• Equipped with energy  
saving ballasts/complies  
with federal energy  
SAMPLE NUMBER: CR-232A-120V-EB81-U  
efficiency standards  
Packaging  
U=Unit Pack  
Number of  
Lamps  
1 or 2 lamps  
(Not Included)  
Options  
(See Options  
Section)  
Tandem  
Blank=4' Length  
8T=8' Length  
One Piece 8' Lens  
• Die formed channel  
Ballast Type (1)  
LE3=T12 Magnetic Energy Saving  
EB8 = T8 Electronic Instant Start.  
• Heavy gauge end plates  
with embossed light seal  
Wattage (Length)  
40=40W T12 (48")  
32=32W T8 (48")  
96=75W T12 (96")  
96=59W T8 (96")  
Total Harmonic Distortion < 10%  
CR=Series  
No. of Ballast  
1, 2 or 3  
• Baked white enamel finish  
EB8 /PLUS= T8 Electronic Instant Start.  
• Low brightness/extruded  
acrylic refractor  
High Ballast Factor >1.13. Total  
Harmonic Distortion < 20%  
No. of  
Ballast  
1, 2 or 3  
Lens  
A=Acrylic Refractor/Lens  
• Lift and shift refractor for  
ease of re-lamping  
ER8 = T8 Electronic Program Rapid Start.  
Total Harmonic Distortion < 10%  
Voltage (1)  
120V=120 Volt  
277V=277 Volt  
No. of Ballast  
1, 2 or 3  
• Wireway cover easily  
removed without tools  
EB2 =T12 Electronic Rapid Start.  
347V=347 Volt  
UNV=Universal Voltage 120-277(2)  
No. of Ballast  
1 or 2  
• Surface or stem mounting,  
single or continuous row  
(For complete details on generic or to specify  
manufacturer’s ballast see pg. 469)  
Options  
GL=Single Element Fuse  
GM=Double Element Fuse  
(3)  
Emergency - for EM installed, see EM options table  
• Also available in tandem  
8' lengths  
• Wall mount application  
possible by ordering  
accessory part number of  
CR-WALLKIT.  
• UL/CUL Listed. Suitable for  
damp locations.  
(1)  
(2)  
NOTES: Products also available in non-US voltages and frequencies for international markets. Not available when specifying emergencies, voltage must be specific.  
(3)  
2 point suspension recommended. Endplates with 7/8" KO standard for continuous row mounting.  
For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting  
Representative for availability and ordering information.  
COOPER LIGHTING  
424  
 

Clover Electronics Water Dispenser B7A User Manual
Conair Styling Iron CS57 User Manual
Cooper Lighting Work Light E4RPIN User Manual
Cooper Lighting Work Light RD Series User Manual
Cuisinart Mixer HM 50 User Manual
Curtis Cordless Telephone TC924 User Manual
Dukane Projector 8043 User Manual
EVGA Computer Hardware 122 YW E173 User Manual
Fortinet Network Card 3810A LENC User Manual
GE Nail Gun 6KBU300 Braking Unit User Manual