Clarion Car Video System OHM642 User Manual

6.4LCD  
Color Monitor  
OWNER’S MANUAL  
 
OWNER’S MANUAL  
In extremely cold temperatures, the movement of the picture may be slow  
and the picture may be dark, but this is not a malfunction. The set will work  
normally once the temperature increases.  
Small black and shiny dots inside the liquid crystal panel are normal for liquid  
crystal product.  
DESCRIPTION  
The OHM642 is a TFT active matrix color LCD monitor that delivers a striking pic-  
ture and superior image resolution. The OHM642 can be used to enjoy video  
images with the Clarion video sources, even if no TV tuner is connected.  
PACKAGE CONTENTS  
6.4" monitor  
5m long cable with 5 male connectors (A/V, Power/Ground, 3.5m IR)  
Mounting Gasket  
Mounting Bracket  
Hardware  
Owner's Manual  
Warranty Card  
BUTTON AND CONNECTOR LOCATIONS  
3
5
4
1
2
7
6
1
2
3
4
Dome Light Switch  
Monitor Release Button  
Picture Select Up  
5
6
7
IR Sensor  
Dome Light Connector  
8 Pin DIN Pigtail  
Picture Select Down  
 
OHM642  
WIRING PRECAUTIONS  
Read all wiring precautions. If you are not sure of the connections, contact your  
authorized Clarion dealer.  
1. Disconnect the negative (-) lead of the battery before making any power  
connections.  
2. When creating passage holes for the power wires, use grommets to elimi-  
nate any sharp edges created during drilling. This will protect the wire from  
being nicked and causing a short circuit.  
3. When connecting the ground lead, fasten the ground lead (black) securely to  
a clean metal plate on the vehicle.  
NOTE: The OHM642 monitor displays video images only. It does not provide  
audio output. Refer to the owner's manual of the connected device for informa-  
tion on audio output.  
INSTALLATION  
The OHM642 is an overhead, fold-down 6.4" monitor with an Infrared (IR) eye.  
It will accept a video signal from any video source with composite video out.  
The IR eye will work directly with any Clarion video source product with an IR  
Eye Input.  
1. Look over the vehicle for a location for the monitor. Each vehicle is different  
and locations will vary. Make sure the monitor will not interfere with the  
driver.  
2. Once a location has been determined, connect the IR, A/V RCAs and  
power cables to the designated sources.  
3. Feed the cables through the hole in the mounting bracket and screw the  
bracket to the headliner. Use short screws so as not to damage the roof.  
4. Plug the cable into the monitor's 8 Pin Din connector. Mount the monitor  
with the provided hardware.  
8 Pin DIN Mini Connector  
1
2
3
4
5
6
7
8
DC 12V  
IR Out  
DC 12V Ground  
Video Input  
A/V Signal Ground  
Audio R Input  
ACC Control  
Audio L Input  
POWER CONNECTOR  
IR REMOTE OUT  
AUDIO R INPUT  
AUDIO L INPUT  
VIDEO INPUT  
 
OWNER’S MANUAL  
MOUNTING OPTIONS  
The OHM642 is an overhead, fold-down 6.4" monitor with an Infrared (IR) eye. It  
will accept a video signal from any video source with composite video out. The IR  
eye will work directly with any Clarion video source product with an IR Eye Input.  
1. Look over the vehicle for a location for the monitor. Each vehicle is different  
and locations will vary. Make sure the monitor will not interfere with the driver.  
2. Once a location has been determined, connect the IR, A/V RCAs and power  
cables to the designated sources.  
3. Feed the cables through the hole in the mounting bracket and screw the  
bracket to the headliner. Use short screws so as not to damage the roof.  
4. Plug the cable into the monitor's 8 Pin Din connector. Mount the monitor with  
the provided hardware.  
Head Lin
Mounting  
Bracket  
PICTURE ADJUSTMENT  
To adjust the picture brightness, use the Brightness UP and DOWN buttons  
located on the front panel of the OHM642. Press the UP button to increase the  
picture brightness. Press the DOWN button to decrease the picture brightness.  
CARE AND MAINTENANCE  
Cleaning the cabinet:  
Use a soft, dry cloth to gently wipe off any dirt.  
Do not use benzene, thinner, car cleaner, etc., as these substances may  
damage the cabinet or cause the paint to peel.  
Cleaning the LCD panel:  
Use a soft, dry cloth to gently wipe off any dust.  
The surface is easily scratched; do not rub it with hard objects.  
 
OHM642  
SPECIFICATIONS  
GENERAL SPECIFICATIONS:  
Power Requirement:  
Power Consumption:  
Weight:  
DC 12V (9-16V)  
0.8A Max. (0.8A or Less)  
2.2 lb. (1.0kg)  
Dimensions:  
9.1" x 12.7" x 1.9"  
(230 x 322 x 48mm) (W x H x D)  
41 - 104 degrees F  
Extension Cable with (male connectors  
A/V Input, Power Connector, 3.5mm IR  
Remote Out), Mounting Gasket, Mounting  
Bracket, Screws  
Operation Temperature:  
Supplied Accessories:  
MONITOR SPECIFICATIONS:  
Display Type:  
Screen Size:  
Pixels:  
Color TFT Active Matrix LCD  
6.4" (Actual Panel Size)  
960 x 234  
Screen Resolution:  
Video System:  
224,640 Dots  
NTSC/PAL  
 
OWNER’S MANUAL  
NOTES:  
 
661 West Redondo Beach Blvd.  
Gardena, CA 90247  
1-800-GO-CLARION  
 

Coleman Camper 2000004679 User Manual
Compaq Personal Computer SR1602HM User Manual
Crown Audio Microphone PZM 20RMG User Manual
Delta Electronics Power Supply HAH1330 User Manual
Dual Kitchen Grill CNE20 User Manual
Dynex TV Mount dx drtvm112 User Manual
Elation Professional Work Light Aquarius II User Manual
Electro Voice Portable Speaker S 60 User Manual
Fisher Price Model Vehicle J0000 User Manual
GE Monogram Water Dispenser GXSF30H User Manual