Clarion CD Player DXZ388RUSB User Manual

Owner’s manual  
Mode d’emploi  
Bedienungsanleitung  
Istruzioni per l’uso  
Gebruiksaanwijzing  
Manual de instrucciones  
Bruksanvisning  
Manual de instruções  
DXZ388RUSB  
DXZ389RUSB  
DXZ389RGUSB  
CD/USB/MP3/WMA/AAC RECEIVER WITH CeNET CONTROL  
AUTORADIO CD/USB/MP3/WMA/AAC / AVEC COMMANDE CeNET  
CD/USB/MP3/WMA/AAC-RECEIVER MIT CeNET-STEUERUNG  
SINTOLETTORE CD/USB/MP3/WMA/AAC CON CONTROLLO CeNET  
CD/USB/MP3/WMA/AAC-RADIO-COMBINATIE MET CeNET-BEDIENING  
RECEPTOR CD/USB/MP3/WMA/AAC CON CONTROL CeNET  
CD/USB/MP3/WMA/AAC-RADIO MED CeNET-KONTROLL  
RECEPTOR CD/USB/MP3/WMA/AAC COM CONTROLO CeNET  
 
Thank you for purchasing this Clarion product.  
Please read this owner’s manual in its entirety before operating this equipment.  
After reading this manual, be sure to keep it in a handy place (e.g., glove compartment).  
Check the contents of the enclosed warranty card and keep it carefully with this manual.  
Contents  
1. FEATURES...................................................................................................................................... 4  
2. PRECAUTIONS ............................................................................................................................... 4  
Handling Compact Discs.................................................................................................................. 5  
3. CONTROLS ..................................................................................................................................... 6  
Names of the Buttons and Their Functions...................................................................................... 6  
Display Items.................................................................................................................................... 8  
Display Screen ................................................................................................................................. 8  
4. DCP (DETACHABLE CONTROL PANEL)...................................................................................... 9  
5. REMOTE CONTROL ..................................................................................................................... 10  
Functions of Remote Control Unit Buttons..................................................................................... 10  
Inserting the Battery ....................................................................................................................... 12  
6. OPERATIONS................................................................................................................................ 13  
Basic Operations............................................................................................................................ 13  
Radio Operations ........................................................................................................................... 17  
Radio Data System Operations...................................................................................................... 19  
CD/MP3/WMA/AAC Operations..................................................................................................... 23  
Operations Common to Each Mode............................................................................................... 27  
7. ACCESSORIES ............................................................................................................................. 30  
USB/MTP Operations..................................................................................................................... 30  
iPod Operations.............................................................................................................................. 32  
Bluetooth BB Operations................................................................................................................ 34  
CD Changer Operations................................................................................................................. 37  
8. TROUBLESHOOTING................................................................................................................... 39  
9. ERROR DISPLAYS ....................................................................................................................... 41  
10. SPECIFICATIONS ......................................................................................................................... 42  
11. OTHERS ........................................................................................................................................ 42  
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB  
3
 
1. FEATURES  
• USB Direct Connection for iPod® & Digital Media  
• Front-panel auxiliary input & 6ch RCA output  
• Bluetooth Ready via CeNET  
iPod” is for legal or rightholder-authorized copying only. Don’t steal music.  
iPod” is a trademark of Apple Inc., registered in the U.S. and other countries.  
2. PRECAUTIONS  
1. This unit is applicable for on-road 4 wheel  
INFORMATION FOR USERS:  
vehicle purpose only. Use for tractor, fork  
CHANGES OR MODIFICATIONS TO THIS  
truck, bulldozer, off road vehicle, 2 or 3  
wheel motor bicycle, marine boat or other  
special purpose vehicle is not appropriate.  
PRODUCT NOT APPROVED BY THE  
MANUFACTURER WILL VOID THE  
WARRANTY.  
2. When the inside of the car is very cold and  
the player is used soon after switching on the  
heater moisture may form on the disc or the  
optical parts of the player and proper  
playback may not be possible. If moisture  
forms on the disc, wipe it off with a soft cloth.  
If moisture forms on the optical parts of the  
player, do not use the player for about one  
hour. The condensation will disappear  
naturally allowing normal operation.  
3. Driving on extremely bumpy roads which  
cause severe vibration may cause the sound  
to skip.  
4
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.  
Handling Compact Discs  
Use only compact discs bearing the  
or  
Storage  
• Do not expose compact discs to direct  
sunlight or any heat source.  
mark.  
Do not play heart-shaped, octagonal, or other  
specially shaped compact discs.  
• Do not expose compact discs to excess  
humidity or dust.  
Some CDs recorded in CD-R/CD-RW mode  
may not be usable.  
• Do not expose compact discs to direct heat  
from heaters.  
Handling  
Cleaning  
• Compared to ordinary music CDs, CD-R and  
CD-RW discs are both easily affected by high  
temperature and humidity and some of CD-R  
and CD-RW discs may not be played.  
Therefore, do not leave them for a long time  
in the car.  
• To remove fingermarks and dust, use a soft  
cloth and wipe in a straight line from the  
center of the compact disc to the  
circumference.  
• Do not use any solvents, such as  
commercially available cleaners, anti-static  
spray, or thinner to clean compact discs.  
• New discs may  
have some  
Ball-point pen  
• After using special compact disc cleaner, let  
the compact disc dry off well before playing it.  
roughness  
Roughness  
around the  
edges. If such  
discs are used,  
the player may  
not work or the  
sound may skip. Use a ball-point pen or the  
like to remove any roughness from the edge  
of the disc.  
• Never stick labels on the surface of the  
compact disc or mark the surface with a  
pencil or pen.  
• Never play a compact disc with any  
cellophane tape or other glue on it or with  
peeling off marks. If you try to play such a  
compact disc, you may not be able to get it  
back out of the CD player or it may damage  
the CD player.  
• Do not use compact discs that have large  
scratches, are misshapen, cracked, etc. Use  
of such discs may cause misoperation or  
damage.  
• To remove a compact disc from its storage  
case, press down on the center of the case  
and lift the disc out, holding it carefully by the  
edges.  
• Do not use commercially available CD  
protection sheets or discs equipped with  
stabilizers, etc. These may damage the disc  
or cause breakdown of the internal  
mechanism.  
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB  
5
 
3. CONTROLS  
Names of the Buttons and Their Functions  
[
]
IR RECEIVER  
[
]
[
], [  
]
[
]
CD SLOT  
[
]
RELEASE  
[
]
USB SLOT  
[
] (EJECT)  
[
]
AUX  
[
]
[
]
SOUND  
SRC  
[
]
[
]
DIRECT  
BND  
[
]
[
[
RPT  
]
]
ROTARY  
RDM  
]
[
]
DISP  
[
]
[
TA  
SCN  
[RELEASE] button  
• Press the [RELEASE] button to unlock the  
DCP.  
[SOUND] button  
• Use the button to switch to the sound adjust  
mode.  
• Press and hold the button for 1 second or  
longer to turn on or off the MAGNA BASS  
EXTEND mode.  
[
] button  
• Perform preset scan while in the radio mode.  
When the button is pressed and held, auto  
store is performed.  
[DIRECT] buttons  
• Play or pause a track while in the CD/MP3/  
WMA/AAC mode.  
• Store a station into memory or recall it directly  
while in the radio mode.  
• Confirm various settings.  
[RDM] button  
• Perform random play while in the CD/MP3/  
WMA/AAC mode.  
[w] (UP), [z] (DN) buttons  
• Select the folder while in the MP3/WMA/AAC  
mode.  
• Press and hold the button for 1 second or  
longer to perform folder random play while in  
the MP3/WMA/AAC mode.  
• Use the buttons to perform various settings.  
[IR RECEIVER]  
• Receiver for remote control unit. (Operating  
range: 30° in all directions)  
[RPT] button  
• Perform repeat play while in the CD/MP3/  
WMA/AAC mode.  
[CD SLOT]  
• CD insertion slot.  
• Press and hold the button for 1 second or  
longer to perform folder repeat play while in  
the MP3/WMA/AAC mode.  
[USB SLOT]  
• USB memory/MTP/iPod devices insertion  
slot.  
[AUX] input jack  
• The input jack for connecting an external  
device.  
6
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.  
Names of the Buttons and Their Functions  
[SCN] button  
• Perform scan play for 10 seconds of each  
track while in the CD/MP3/WMA/AAC mode.  
[SRC] button  
• Press the button to turn on the power.  
• Press and hold the button for 1 second or  
longer to turn off the power.  
• Press and hold the button for 1 second or  
longer to perform folder scan play while in the  
MP3/WMA/AAC mode.  
• Switch the operation mode among the radio  
mode, etc.  
[TA] button  
• Use the button to set the TA (Traffic  
Announcement) standby mode.  
[x], [v] buttons  
• Select a station while in the radio mode or  
select a track while in the CD/MP3/WMA/AAC  
mode.  
[DISP] button  
• Switch the display indication.  
This button is used to make various settings.  
• Press and hold the button for 1 second or  
longer to enter the adjust mode.  
• Press and hold the button for 1 second or  
longer to enter the fast-forward or fast-  
backward mode.  
[ROTARY] knob  
• Adjust the volume by turning the knob  
clockwise or counterclockwise.  
[Q] (EJECT) button  
• Eject a disc when it is loaded into the unit.  
[BND] button  
• Switch the band, or seek tuning or manual  
tuning while in the radio mode.  
• Play a first track while in the CD/MP3/WMA/  
AAC mode.  
• Press the button to change the character.  
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB  
7
 
Display Items  
Operation status indication  
Source, titles, function, setting, clock, etc. are displayed.  
: MUTE indication  
: Alternative frequency indication  
: Disc No. indication  
Preset channel indication (1 to 6)  
AF  
: Enter indication  
REG  
TA  
TP  
PTY  
MANU  
: Regional indication  
: Traffic announcement indication  
: Traffic programme indication  
: Programme type indication  
: Manual indication  
: Bluetooth indication  
: MP3 indication  
: WMA indication  
AAC : AAC indication  
MP3  
WMA  
Display Screen  
In extreme cold, the screen movement may slow down and the screen may darken, but this is normal.  
The screen will recover when it returns to normal temperature.  
8
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.  
4. DCP (DETACHABLE CONTROL PANEL)  
The control panel can be detached to prevent  
Storing the DCP in the DCP Case  
theft. When detaching the control panel, store it  
Hold the DCP, in the orientation as shown in the  
in the DCP (DETACHABLE CONTROL PANEL)  
figure below, and put it into the supplied DCP  
case. (Ensure the DCP is in the correct  
orientation.)  
case to prevent scratches.  
We recommend taking the DCP with you when  
leaving the car.  
Removing the DCP  
DCP  
1. Press the [SRC] button for 1 second or  
longer to switch off the power.  
2. Press in the [RELEASE] button.  
[
] button  
RELEASE  
DCP case  
CAUTION  
• The DCP can easily be damaged by  
shocks. After removing it, be careful not to  
drop it or subject it to strong shocks.  
• When the Release button is pressed and  
the DCP is unlocked, the car’s vibrations  
may cause it to fall. To prevent damage to  
the DCP, always store it in its case after  
detaching it.  
The DCP is unlocked  
3. Remove the DCP.  
• The connector connecting the main unit  
and the DCP is an extremely important  
part. Be careful not to damage it by  
pressing on it with fingernails, pens,  
screwdrivers, etc.  
DCP  
Main Unit Front  
DCP Rear Panel  
Attaching the DCP  
1. Insert the right side of the DCP into the main  
unit.  
2. Insert the left side of the DCP into the main  
unit.  
DCP  
connector  
Main unit connector  
2.  
Note:  
• If the DCP is dirty, wipe off the dirt with a soft, dry  
cloth only.  
DCP  
1.  
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB  
9
 
5. REMOTE CONTROL  
Functions of Remote Control Unit Buttons  
Some buttons on the remote control unit have different functions from the corresponding buttons on the main  
unit.  
Signal transmitter  
[
]
]
[
[
]
SRC  
BND  
]
[
[
], [  
[
], [  
]
]
]
]
[
[
MUTE  
DISP  
[
TA  
]
PTY  
[
]
[
]
AF  
PS/AS  
[AF] button  
Shared modes  
• Press to cancel an emergency broadcast  
during an ALARM interrupt.  
[SRC] button  
• Use to alternate operation mode among the  
various modes.  
[PTY] button  
• Press to cancel a PTY broadcast during a  
PTY interrupt.  
• Press to cancel a traffic announcement  
broadcast, an emergency broadcast, and a  
PTY broadcast during a TA, ALARM or PTY  
interrupt.  
[DISP] button  
• Press to alternate among main display, title  
display and CT (clock time) display.  
[w], [z] buttons  
• Increases and decreases volume.  
Radio (Radio Data System) mode  
[BND] button  
[MUTE] button  
• Turns mute function on and off.  
• Switches reception band.  
[TA] button  
• TA on and off.  
[x], [v] buttons  
• Moves preset channels up and down.  
• Press to cancel a traffic announcement  
broadcast during a TA interrupt.  
[PS/AS] button  
• Press to perform preset scan.  
• Press and hold the button for 2 seconds or  
longer to perform auto store.  
10  
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.  
Functions of Remote Control Unit Buttons  
[AF] button  
• AF function on and off.  
CD changer mode  
[BND] button  
• Press to switch to next disc in ascending  
order.  
• Press and hold the button for 1 second or  
longer to perform REG function on and off.  
[PTY] button  
• PTY mode on and off.  
[x], [v] buttons  
• Press to move the tracks up and down.  
• Press and hold the button for 1 second or  
longer to perform fast-forward/fast-backward.  
CD/MP3/WMA/AAC and USB/MTP  
modes  
[
] button  
[BND] button  
• Press to play the first track.  
• Switches between playback and pause.  
[PS/AS] button  
• Press to perform scan play.  
[x], [v] buttons  
• Press to move the tracks up and down.  
• Press and hold the button for 1 second or  
longer to perform disc scan play.  
• Press and hold the button for 1 second or  
longer to perform fast-forward/fast-backward.  
[AF] button  
• Press to perform repeat play.  
[
] button  
• Switches between playback and pause.  
• Press and hold the button for 1 second or  
longer to perform disc repeat play.  
[PS/AS] button  
• Press to perform scan play.  
[PTY] button  
• When in MP3/WMA/AAC and USB/MTP  
modes, press and hold the button for 1  
second or longer to perform folder scan play.  
• Press to perform random play.  
• Press and hold the button for 1 second or  
longer to perform disc random play.  
[AF] button  
• Press to perform repeat play.  
iPod mode  
• When in MP3/WMA/AAC and USB/MTP  
modes, press and hold the button for 1  
second or longer to perform folder repeat  
play.  
[x], [v] buttons  
• Press to move the tracks up and down.  
• Press and hold the button for 1 second or  
longer to perform fast-forward/fast-backward.  
[PTY] button  
• Press to perform random play.  
[
] button  
• Switches between playback and pause.  
• When in MP3/WMA/AAC and USB/MTP  
modes, press and hold the button for 1  
second or longer to perform folder random  
play.  
[AF] button  
• Press to perform repeat play.  
[PTY] button  
• Press to perform random play.  
• Press and hold the button for 1 second or  
longer to perform all random play.  
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB  
11  
 
Inserting the Battery  
1 Turn over the remote control unit and slide  
the cover in the direction indicated by the  
arrow in the illustration.  
2 Insert the battery (CR2025) into the insertion  
guides, with the printed side (+) facing  
upwards.  
3 Press the battery in the direction indicated by  
the arrow so that it slides into the  
compartment.  
4 Replace the cover and slide in until it clicks  
into place.  
Notes:  
Misuse may result in rupture of the battery,  
producing leakage of fluid and resulting in  
personal injury or damage to surrounding  
materials. Always follow these safety precautions:  
Insertion guide  
• Use only the designated battery.  
• When replacing the battery, insert properly, with  
+/– polarities oriented correctly.  
• Do not subject battery to heat, or dispose of in  
fire or water. Do not attempt to disassemble the  
battery.  
• Dispose of used batteries properly.  
12  
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.  
6. OPERATIONS  
Note:  
• Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 6.  
Basic Operations  
Adjusting the volume  
1. Turning the [ROTARY] knob clockwise  
CAUTION  
Be sure to lower the volume before  
increases the volume; turning it  
switching off the unit power or the ignition  
key. The unit remembers its last volume  
setting. If you switch the power off with the  
volume up, when you switch the power back  
on, the sudden loud volume may hurt your  
hearing and damage the unit.  
counterclockwise decreases the volume.  
The volume level is from 0 (minimum) to 33  
(maximum).  
Switching the display  
Press the [DISP] button to select the desired  
display.  
Turning on/off the power  
Note:  
Once selected, the preferred display becomes  
the display default. When a function  
adjustment such as volume is made, the  
screen will momentarily switch to that  
function’s display, then revert back to the  
preferred display several seconds after the  
adjustment.  
• Be careful about using this unit for a long time  
without running the engine. If you drain the car’s  
battery too far, you may not be able to start the  
engine and this can reduce the service life of the  
battery.  
1. Press the [SRC] button.  
For information on how to enter a title, refer to  
the subsection “Entering titles” in section  
Operations Common to Each Mode”.  
When CT data is not received, “CT– –:– –”  
appears in the display.  
2. The illumination and display on the unit light  
up. The unit automatically remembers its last  
operation mode and will automatically switch  
to display that mode.  
3. Press and hold the [SRC] button for 1  
second or longer to turn off the power for the  
unit.  
Note:  
• The first time this unit is turned on after the wire  
connections are completed, it must be checked  
what equipment is connected. When the power  
is turned on, the “S-CHECK” appears in the  
display. The system check starts within the unit.  
Then the unit turn to the radio mode.  
Selecting a mode  
1. Press the [SRC] button to change the  
operation mode.  
2. Each time you press the [SRC] button, the  
operation mode changes in the following  
order:  
Radio CD/MP3/WMA/AAC USB/MTP/  
iPod (TEL) (CD changer) AUX ➜  
Radio...  
External equipment not connected with  
CeNET is not displayed.  
iPod/MTP can connect to this unit via USB  
SLOT.  
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB  
13  
 
Basic Operations  
When “Z+FLAT” is set:  
Sound Adjustment  
You can adjust a sound effect or tone quality to  
your preference.  
3-2. Press and hold the [  
] button for 1second  
or longer, bass/treble characteristics  
become flat and switch to the “CUSTOM ”  
mode.  
To change sound setting  
When “CUSTOM ” is set:  
1. Press the [SOUND] button to switch to the  
3-1. Press the [x] or [v] button to select the  
BASS” or “TREBLE” mode to adjust.  
sound adjustment selection display.  
The factory default sound setting is “Z-  
EHCR”.  
When “EXCITE/IMPACT/B-BOOST” is set:  
3-2. Press the [  
] button.  
2. Then press the [x] or [v] button to  
3-3. Press the [w] or [z] button to adjust the  
select the sound adjustment mode.  
setting in the range of 3 to +3.  
Each time you press the [x] or [v]  
button, the sound adjustment mode  
changes as following order:  
The factory default setting is “0”.  
3-4. Press the [  
] button to return to the  
previous mode.  
Z-EHCRBASSTREBLE↔  
BALANCEFADERS-W LPF↔  
S-W VOLHPF”  
Adjusting the bass  
This adjustment can be performed only when  
the Z-Enhancer Plus is set to “CUSTOM ”.  
In the case of display blinking “ENT”, you  
2-1. Select “BASS”.  
can press the [  
setting value.  
] button to adjust the  
3-1. Press the [w] or [z] button to select as  
The sound adjustment mode will be  
displayed for 2 seconds before showing the  
sound setting.  
following order.  
BASS(G)BASS(F)BASS(Q)”  
The factory default setting is “BASS(G)”.  
3. Press the [w] or [z] button to adjust the  
3-2. Press the [  
] button.  
selected audio mode.  
3-3. Press the [w] or [z] button to select the  
4. After completing settings, press the  
[SOUND] button to return to the previous  
mode.  
setting.  
BASS(G) : The factory default setting is “0”.  
(Adjustment range: +7 to 7)  
BASS(F) : The factory default setting is “60”.  
Setting the Z-Enhancer Plus  
This unit is provided with 4 types of sound tone  
effects stored in memory.  
(Adjustment range: 60/80/100/  
200)  
BASS(Q) : The factory default setting is “1”.  
Select the one you prefer.  
The factory default setting is “OFF”.  
2-1. Select “Z-EHCR”.  
(Adjustment range: 1/1.25/1.5/2)  
3-4. Press the [  
] button to return to the  
previous mode.  
3-1. Each time you press the [w] or [z] button,  
the tone effect changes in the following  
order:  
Z+FLATCUSTOM EXCITE↔  
IMPACTB-BOOSTOFF”  
Z+FLAT : user Z+FLAT  
CUSTOM : user custom  
EXCITE : bass and treble emphasized  
mid emphasized  
IMPACT : bass and treble emphasized  
B-BOOST : bass emphasized  
OFF  
: no sound effect  
14  
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.  
Basic Operations  
Adjusting the treble  
This adjustment can be performed only when  
the Z-Enhancer Plus is set to “CUSTOM ”.  
Adjusting the subwoofer  
You can set the low pass filter of subwoofer.  
2-1. Select “S-W LPF”.  
2-1. Select “TREBLE”.  
3-1. Press the [w] or [z] button to select as  
3-1. Press the [w] or [z] button to select as  
following order.  
following order.  
THROUGHLPF 50LPF 80↔  
LPF 120”  
TREB(G)TREB(F)”  
The factory default setting is “TREB(G)”.  
The factory default setting is “THROUGH”.  
3-2. Press the [  
] button.  
Adjusting the subwoofer output  
3-3. Press the [w] or [z] button to select the  
volume  
setting.  
You can adjust the volume output from the unit's  
subwoofer output terminal.  
TREB(G) : The factory default setting is “0”.  
2-1. Select “S-W VOL”.  
(Adjustment range: +7 to 7)  
3-1. Press the [w] or [z] button to increases  
TREB(F) : The factory default setting is  
10K”.  
or decreases the subwoofer volume.  
The factory default setting is “0”.  
(Adjustment range: +6 to –6)  
(Adjustment range:  
10K/12.5K/15K/17.5K)  
When the volume level is more than 30, the  
subwoofer volume adjustment value can not  
reach +6.  
3-4. Press the [  
] button to return to the  
previous mode.  
Adjusting the balance  
2-1. Select “BALANCE”.  
Adjusting the HPF  
2-1. Select “HPF”.  
3-1. Press the [w] or [z] button to adjust the  
3-1. Press the [w] or [z] button to select as  
balance of the right and left speakers.  
following order.  
The factory default setting is “CENTER”  
(center). (Adjustment range: RIGHT12 to  
LEFT12 (right 12 to left 12))  
120THROUGH”  
The factory default setting is “THROUGH”.  
This is supported only with amplifiers  
equipped with this function. Output is not  
supported from RCA cables.  
Adjusting the fader  
2-1. Select “FADER”.  
3-1. Press the [w] or [z] button to adjust the  
Note:  
balance of the rear and front speakers.  
• During SOUND adjustment mode, if no  
operation is performed for more than 10  
seconds, this mode can be cancelled and return  
to previous mode.  
The factory default setting is “CENTER”  
(center). (Adjustment range: FRONT12 to  
REAR12 (front 12 to rear 12))  
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB  
15  
 
Basic Operations  
Setting the MAGNA BASS EXTEND  
CT (Clock Time) function  
The CT function receives CT data sent from an  
“Radio Data System” station and displays the  
time.  
If a CT data is not being received, “CT– –:– –”  
appears in the display.  
The MAGNA BASS EXTEND does not adjust  
the low frequencies like the normal sound  
adjustment function, but emphasizes the deep  
bass frequencies to provide you with a dynamic  
sound.  
The factory default setting is “OFF” (off).  
Note:  
• CT data is not transmitted in some countries and  
by some broadcast stations. Also, in some areas,  
the CT may not display accurately.  
1. Press and hold the [SOUND] button for 1  
second or longer to turn on the MAGNA  
BASS EXTEND effect. “M-B EX” appears in  
the display for 2 seconds.  
2. Press and hold the [SOUND] button for 1  
second or longer to turn off the MAGNA  
BASS EXTEND effect.  
16  
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.  
Radio Operations  
LOCAL SEEK  
Listening to the radio  
If the [x] or [v] button is pressed and held  
in position for 1 second or longer, local seek  
tuning will be enabled. Broadcast stations with  
good reception sensitivity are selected.  
When local seeking starts, “LO” appears in the  
display.  
1. Press the [SRC] button and select the radio  
mode. The frequency or PS and PTY  
appears in the display.  
PS: Programme service name  
PTY: Programme type  
2. Press the [BND] button and select the radio  
band. Each time the button is pressed, the  
radio reception band changes in the  
following order:  
Manual tuning  
There are 2 ways available: Quick tuning and  
step tuning.  
F1 (FM1) F2 (FM2) F3 (FM3) AM  
(MW/LW) F1 (FM1)...  
When you are in the step tuning mode, the  
frequency changes one step at a time. In the  
quick tuning mode, you can quickly tune the  
desired frequency.  
3. Press the [x] or [v] button to tune in the  
desired station.  
1. Press the [BND] button and select the  
Tuning  
desired band (FM or AM (MW/LW)).  
There are 3 types of tuning mode available,  
seek tuning, manual tuning and preset tuning.  
If “MANU” is not lit in the display, press and  
hold the [BND] button for 1 second or longer.  
MANU” is lit in the display and manual tuning  
is now available.  
Seek tuning  
There are 2 types of seek tuning: DX SEEK and  
LOCAL SEEK.  
2. Tune into a station.  
Quick tuning  
Press and hold the [x] or [v] button for 1  
DX SEEK can automatically tune in to  
receivable broadcast stations; LOCAL SEEK  
can tune in to only broadcast stations with a  
good reception sensitivity.  
second or longer to tune in a station.  
Step tuning  
Press the [x] or [v] button to manually tune  
in a station.  
1. Press the [BND] button and select the  
desired band (FM or AM (MW/LW)).  
If no operation is performed for more than 7  
seconds, manual tuning is cancelled and the  
display returns to the previous mode.  
2. Tune into a station.  
If “MANU” is lit in the display, press and hold  
the [BND] button for 1 second or longer.  
MANU” in the display goes off and seek  
tuning is now available.  
If “TA” is lit in the display, TP stations are  
automatically sought.  
DX SEEK  
Press the [x] or [v] button to automatically  
seek a station.  
When the [v] button is pressed, the station is  
sought in the direction of higher frequencies; if  
the [x] button is pressed, the station is sought  
in the direction of lower frequencies.  
When seek tuning starts, “DX” appears in the  
display.  
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB  
17  
 
Radio Operations  
Recalling a preset station  
Preset scan  
Preset scan receives the stations stored in  
preset memory in order. This function is useful  
when searching for a desired station in memory.  
A total of 24 preset positions (6-FM1, 6-FM2, 6-  
FM3, 6-AM) exists to store individual radio  
stations in memory. Press the corresponding  
[DIRECT] button or the [w] / [z] button to  
recall the stored radio frequency automatically.  
1. Press the [  
2. When a desired station is tuned in, press the  
] button again to continue receiving that  
station.  
Note:  
• Be careful not to press and hold the [  
] button.  
1. Press the [BND] button and select the  
[
desired band (FM or AM (MW/LW)).  
2. Press the corresponding [DIRECT] button or  
the [w] / [z] button to recall the stored  
station.  
] button  
for 2 seconds or longer, otherwise the auto store  
function is engaged and the unit starts storing  
stations.  
Note:  
• Press and hold one of the [DIRECT] buttons for 2  
seconds or longer to store that station into preset  
memory.  
Manual memory  
1. Select the desired station with seek tuning or  
manual tuning.  
2. Press and hold one of the [DIRECT] buttons  
for 2 seconds or longer to store the current  
station into preset memory.  
Auto store  
Auto store is a function for storing up to 6  
stations that are automatically tuned in  
sequentially. If 6 receivable stations cannot be  
received, a previously stored station remains  
unoverwritten at the memory position.  
1. Press the [BND] button and select the  
desired band (FM or AM (MW/LW)).  
2. Press and hold the [  
] button for 2 seconds  
or longer. The stations with good reception  
are stored automatically to the preset  
channels.  
18  
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.  
Radio Data System Operations  
4. Press the [DISP] button to return to the  
Radio Data System  
This unit has a built-in “Radio Data System”  
decoder system that supports broadcast  
stations transmitting “Radio Data System” data.  
previous mode.  
If the reception of the current broadcast station  
deteriorates, “PISEARCH” appears in the display  
and the radio searches for the same programme  
on another frequency.  
This system can display the name of the  
broadcast station being received (PS) and can  
automatically switch to the broadcast station  
with the best reception as you move long  
distances (AF switching).  
REG (Regional programme)  
function  
When the REG function is ON, the optimum  
regional station can be received. When this  
function is OFF, if the regional station area  
switches as you drive, a regional station for that  
region is received.  
The factory default setting is “OFF”.  
Notes:  
• This function is disabled when a national station  
such as BBC R2 is being received.  
• The REG function ON/OFF setting is valid when  
the AF function is ON.  
Also, if a traffic announcement or programme  
type is broadcast from an “Radio Data System”  
station, no matter what mode you are in, this  
broadcast is received.  
Additionally, if EON information is received, this  
information enables automatic switching of other  
preset stations on the same network and  
interruption of the station being received with  
traffic information from other stations (TP). This  
function is not available in some areas.  
When using the “Radio Data System” function,  
always set the radio to FM mode.  
1. Press and hold the [DISP] button for 1  
second or longer to switch to the “Radio Data  
System” adjustment selection display.  
• AF  
• PS  
: Alternative Frequency  
: Programme Service Name  
2. Press the [x] or [v] button to select  
REG”.  
3. Press the [w] or [z] button to select ON” or  
OFF”.  
• PTY : Programme Type  
• EON : Enhanced Other Network  
• TP  
: Traffic Programme  
“Radio Data System” interrupt does not function  
during AM radio reception or in TV mode.  
When set receives “Radio Data System” signal,  
and can read PS data, PS appears in the display.  
• ON:  
REG” in the display lights and REG function  
turns on.  
• OFF:  
REG” in the display goes off and REG  
function turns off.  
AF function  
The AF function switches to a different  
frequency on the same network in order to  
maintain optimum reception.  
4. Press the [DISP] button to return to the  
previous mode.  
The factory default setting is “ON”.  
1. Press and hold the [DISP] button for 1  
second or longer to switch to the “Radio Data  
System” adjustment selection display.  
2. Press the [x] or [v] button to select  
AF”.  
3. Press the [w] or [z] button to select ON” or  
OFF”.  
• ON:  
AF” in the display lights and AF function  
turns on.  
• OFF:  
AF” in the display goes off and AF function  
turns off.  
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB  
19  
 
Radio Data System Operations  
Manually tuning a regional station  
in the same network  
1. This function is valid when the AF function is  
ON and the REG function is OFF.  
Auto store function for TP stations  
You can automatically store up to 6 TP stations  
into preset memory. If the number of TP can be  
received less than 6, broadcast stations already  
stored in memory and left without being  
overwritten.  
Note:  
• This function can be used when a regional  
broadcast of the same network is received.  
As “TA” lit in the display, press and hold the  
[
] button for 2 seconds or longer. The TP  
2. Press any one of the [DIRECT] buttons to  
stations with the good reception sensitivity are  
stored into preset memory.  
Even if you select FM1 or FM2, a TP station is  
stored into memory for FM3.  
call out the regional station.  
3. If the reception condition of the called out  
station is bad, press the [DIRECT] button of  
the same number. The unit receives a local  
station on the same network.  
PTY (Programme Type)  
This function enables you to listen to a  
broadcast of the selected programme type even  
if the unit is on a function mode other than radio.  
Some countries do not yet have PTY broadcast.  
In the TA standby mode, a TP station has priority  
over a PTY broadcast station.  
TA (Traffic Announcement)  
In the TA standby mode, when a traffic  
announcement broadcast starts, the traffic  
announcement broadcast is received as top  
priority regardless of the function mode so you  
can listen to it. Traffic programme (TP)  
automatic tuning is also possible.  
The factory default setting is “OFF”.  
1. Press and hold the [DISP] button for 1  
second or longer to switch to the “Radio Data  
System” adjustment selection display.  
This function can only be used when “TP” is lit in  
the display. When “TP” is lit, this means that the  
“Radio Data System” broadcast station being  
received has traffic announcement programmes.  
2. Press the [x] or [v] button to select  
PTY”.  
Setting the TA standby mode  
If you press the [TA] button when only TP” is lit  
in the display, TP” and “TA” light in the display  
and the unit is set into the TA standby mode  
until a traffic announcement is broadcast. When  
a traffic announcement broadcast starts, “TRA  
INFO” appears in the display. If you press the  
[TA] button while a traffic announcement  
broadcast is being received, the traffic  
3. Press the [w] or [z] button to select “ON”  
or “OFF”.  
• ON:  
PTY” in the display lights and PTY standby  
mode is turned on. When the selected PTY  
broadcast starts, the PTY item name  
appears in the display.  
• OFF:  
announcement broadcast reception is cancelled  
and the unit goes into the TA standby mode.  
PTY” in the display goes off and PTY  
standby mode is cancelled.  
Cancelling the TA standby mode  
As TP” and “TA” lit in the display, press the [TA]  
button. The “TA” in the display goes off and the  
TA standby mode is cancelled.  
4. Press the [DISP] button to return to the  
previous mode.  
Cancelling a PTY interrupt broadcast  
Press the [TA] button during the PTY interrupt  
broadcast, the PTY interrupt is cancelled and  
the unit returns to PTY standby mode.  
If “TP” is not lit, pressing the [TA] button searches  
for a TP station.  
Searching for a TP station  
When TP” is not lit, if you press the [TA] button,  
TA” in the display lights and the unit  
automatically receives a TP station.  
Note:  
• If a TP station is not received, the unit continues  
the search operation. Pressing [TA] button again  
goes off TA” in the display and stops TP station  
searching.  
20  
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.  
Radio Data System Operations  
Selecting PTY  
1. Press and hold the [DISP] button for 1  
second or longer to switch to the “Radio Data  
System” adjustment selection display.  
4. Press the [w] or [z] button to select the  
desired PTY.  
The 29 types of PTY below can be selected.  
5. If you press and hold any one of the  
[DIRECT] buttons for 2 seconds or longer,  
the selected PTY is stored into that preset  
channel memory.  
2. Press the [x] or [v] button to select  
PTY-SEL”.  
3. Press the [  
] button.  
PTY item  
4. Press any one of the [DIRECT] buttons.  
Alternatively, press the [w] or [z] button to  
select the desired PTY.  
ENGLISHe  
NEWSa  
ContentsA  
News  
5. Press the [DISP] button to return to the  
AFFAIRSa  
INFOa  
Today’s events  
Information  
Sports  
previous mode.  
Below are the factory default settings stored  
for the [DIRECT] buttons.  
SPORTa  
PTY item  
Preset  
number  
EDUCATEa  
DRAMAa  
Education  
Drama  
ENGLISHd ContentsA  
1
2
3
4
5
6
NEWSb  
INFO  
News  
CULTUREa  
SCIENCEa  
VARIEDa  
POP Ma  
Culture  
Information  
Pop Music  
Sports  
Science  
POP M  
SPORT  
Variety  
Pop music  
Rock music  
Easy music  
Light music  
Classics  
CLASSICS Serious Classical Music  
EASY M Easy Listening Music  
ROCK Ma  
EASY Ma  
LIGHT Ma  
CLASSICSa  
OTHER Ma  
WEATHERa  
FINANCEa  
CHILDRENa  
SOCIALa  
RELIGIONa  
PHONE INa  
TRAVELa  
LEISUREa  
JAZZa  
The PTY select mode is cancelled  
automatically 7 seconds after a PTY is  
selected.  
Other music  
Weather  
Finance  
PTY seek  
1. Press and hold the [DISP] button for 1  
second or longer to switch to the “Radio Data  
System” adjustment selection display.  
For children  
Social  
2. Press the [x] or [v] button to select  
PTY-SEL”.  
Religion  
Phone in  
Travel  
3. Press the [  
] button.  
4. Press the [v] button to search for a PTY  
broadcast in the direction of higher  
Leisure  
frequencies; press the [x] button to search  
in the direction of lower frequencies.  
Jazz  
COUNTRYa  
NATION Ma  
OLDIESa  
Country  
If no station with the selected PTY broadcast  
can be received, the unit returns to the PTY  
select mode.  
Nation music  
Oldies  
FOLK Ma  
DOCUMENTa  
Folk music  
Documentaries  
PTY preset memory  
1. Press and hold the [DISP] button for 1  
second or longer to switch to the “Radio Data  
System” adjustment selection display.  
2. Press the [x] or [v] button to select  
PTY-SEL”.  
3. Press the [  
] button.  
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB  
21  
 
Radio Data System Operations  
Emergency broadcast  
If an emergency broadcast is received, all the  
function mode operations are stopped.  
ALARM” appears in the display and the  
emergency broadcast can be heard.  
Volume setting of TA, emergency  
broadcast (Alarm) and PTY  
The volume for TA, Alarm and PTY interrupts  
can be set during TA, Alarm or PTY interrupt.  
The factory default setting is “15”.  
Cancelling an emergency broadcast  
If you press the [TA] button, emergency  
broadcast reception is cancelled.  
During a TA, Alarm or PTY interrupt, turn the  
[ROTARY] knob to set the volume to the desired  
level (0 to 33).  
When the TA, Alarm or PTY interrupt ends, the  
volume returns to the level it had before the  
interrupt.  
Switching the PTY display language  
You can select one of 4 languages (English,  
German, Swedish or French) for the PTY  
displayed in the display.  
The factory default setting is “ENGLISH”.  
1. Press and hold the [DISP] button for 1  
second or longer to switch to the adjustment  
selection display.  
2. Press the [x] or [v] button to select  
LANGUAGE”.  
3. Press the [w] or [z] button to select the  
desired language.  
4. Press the [DISP] button to return to the  
previous mode.  
22  
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.  
CD/MP3/WMA/AAC Operations  
What is AAC?  
MP3/WMA/AAC  
• AAC is an acronym for “Advanced Audio  
Coding” and refers to the audio compression  
method used with video compression  
standards MPEG-2 and MPEG-4.  
What is MP3?  
MP3 is an audio compression method and  
classified into audio layer 3 of MPEG standards.  
This audio compression method has penetrated  
into PC users and become a standard format.  
• AAC files composed with the following  
conditions can be played:  
This MP3 features the original audio data  
compression to about 10 percent of its initial  
size with a high sound quality. This means that  
about 10 music CDs can be recorded on a CD-R  
disc or CD-RW disc to allow a long listening time  
without having to change CDs.  
- AAC files encoded with iTunes.  
- iTunes Ver. 7.0 or earlier.  
- File extension “.m4a” (“.M4A”)  
• Tracks purchased at an iTunes Music store,  
and copyright-protected files cannot be  
played.  
• When playing AAC files that include image  
data, additional time may be required before  
playback begins.  
What is WMA?  
WMA is the abbreviation of Windows Media  
Audio, an audio file format developed by  
Microsoft Corporation.  
• Files may not play properly, depending on the  
iTunes version under which an AAC file is  
encoded.  
Notes:  
• If you play a file with DRM (Digital Rights  
Management) for WMA remaining ON, no audio  
is output (The WMA indicator blinks).  
Precautions when creating MP3/  
• Windows Media™, and the Windows ® logo are  
trademarks, or registered trademarks of  
Microsoft Corporation in the United States and/or  
other countries.  
WMA/AAC file  
Usable sampling rates and bit rates  
1. MP3: Sampling rate 8 kHz-48 kHz,  
Bit rate 8 kbps-320 kbps / VBR  
2. WMA: Bit rate 8 kbps-320 kbps  
3. AAC: Sampling rate 8 kHz-48 kHz,  
Bit rate 8 kbps-320 kbps / VBR  
To disable DRM (Digital Rights  
Management)  
1. When using Windows Media Player 9/10/11,  
click on TOOL OPTIONS MUSIC  
RECORD tab, then under Recording  
settings, unclick the Check box for RECORD  
PROTECTED MUSIC. Then, reconstruct  
files.  
File extensions  
1. Always add a file extension “.MP3”, “.WMA”  
or “.M4A” to MP3, WMA or AAC file by using  
single byte letters. If you add a file extension  
other than specified or forget to add the file  
extension, the file cannot be played.  
Personally constructed WMA files are used  
at your own responsibility.  
2. Files without MP3/WMA/AAC data will not  
play. The indication “NO FILE” appears in  
the play time display if you attempt to play  
files without MP3/WMA/AAC data.  
When VBR files are played, the play time display  
may differ the play location.  
When MP3/WMA/AAC files are played, a little no  
sound part is caused between tunes.  
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB  
23  
 
CD/MP3/WMA/AAC Operations  
Logical format (File system)  
Set the type of file to be played  
(multi-session function)  
When a single disc holds both normal CD type  
tracks and MP3/WMA/AAC type tracks, use this  
command to select which type of track to play.  
1. When writing MP3/WMA/AAC file on a CD-R  
disc or CD-RW disc, please select “ISO9660  
level 1, 2 or JOLIET or Romeo” or APPLE  
ISO as the writing software format. Normal  
play may not be possible if the disc is  
recorded on another format.  
Default setting is “M-SESS CD”.  
• When only one type of track (either music CD  
or MP3/WMA/AAC) is recorded on a disc,  
selecting either type will allow playback of the  
disc.  
2. The folder name and file name can be  
displayed as the title during MP3/WMA/AAC  
play but the title must be within 64 single  
byte alphabetical letters and numerals  
(including an extension).  
• When playing CCCD (copy-control CDs), set  
to CD type.  
3. Do not affix a name to a file inside a folder  
having the same name.  
1. Press and hold the [BND] button for 1  
second or longer.  
Folder structure  
Each time the button is held pressed in this  
way, “M-SESS” will be displayed for 1  
second, then “CD” or “MP3” appears in the  
display, the playback type alternates  
1. A disc with a folder having more than 8  
hierarchical levels will be impossible.  
Number of files or folders  
1. Up to 255 files can be recognized per folder.  
Up to 510 files can be played.  
between CD type and MP3/WMA/AAC type.  
• “M-SESS CD”  
When playing music CD only.  
2. Tracks are played in the order that they were  
recorded onto a disc. (Tracks might not  
always be played in the order displayed on  
the PC.)  
• “M-SESS MP3”  
When playing music MP3/WMA/AAC only.  
2. When setting is completed, remove the disc  
and reinsert it.  
3. Some noise may occur depending on the  
type of encoder software used while  
recording.  
Backup Eject function  
Just pressing the [Q] button, ejects the disc  
even if the power to the unit was not turned on.  
1. Press the [Q] button. Remove the disc after  
it is ejected.  
Notes:  
• If you force a CD into before auto reloading, this  
can damage the CD.  
• If a CD (12 cm) is left in the ejected position for  
15 seconds, the CD is automatically reloaded  
(Auto reload).  
24  
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.  
CD/MP3/WMA/AAC Operations  
Listening to a disc already loaded in  
the unit  
Press the [SRC] button to select the CD/MP3/  
WMA/AAC mode.  
Displaying CD titles  
This unit can display title data for CD-text/MP3/  
WMA/AAC disc and user titles input with this  
unit.  
1. Each time you press the [DISP] button to  
When the unit enters the CD/MP3/WMA/AAC  
mode, play starts automatically.  
change the title display.  
CD-TEXT disc  
User Track Disc Artist User ...  
If there is no disc loaded, the indication “NO  
DISC” appears in the title display.  
MP3/WMA/AAC disc  
Track Folder Title Album Artist ➜  
Track ...  
The mode changes each time the [SRC] button  
is pressed. (Modes are not displayed for  
equipment that is not connected.)  
Notes:  
Radio CD/MP3/WMA/AAC USB/MTP/  
iPod (TEL) (CD changer) AUX ➜  
Radio ...  
• If the CD playing is not a CD-text CD or no user  
title has been input, “NO TITLE” appears in the  
display.  
• If MP3/WMA/AAC disc is not input TAG, “NO  
TITLE” appears in the display.  
• For MP3, supports ID3 Tags V2.3 / 2.2 / 1.1 / 1.0.  
• Tag displays give priority to V2.3 / 2.2.  
• In the case of album Tags for WMA, the  
information written into the extension header is  
displayed.  
Loading a CD  
1. Insert a CD into the center of the CD SLOT  
with the labeled side facing up. The CD plays  
automatically after loading.  
Notes:  
• Never insert foreign objects into the CD SLOT.  
• If the CD is not inserted easily, there may be  
another CD in the mechanism or the unit may  
require service.  
• Only ASCII characters can be displayed in Tags.  
Selecting a track  
Track-up  
• Discs not bearing the  
or  
mark and  
CD-ROMs cannot be played by this unit.  
1. Press the [v] button to move ahead to the  
• Some CDs recorded in CD-R/CD-RW mode may  
not be usable.  
beginning of the next track.  
2. Each time you press the [v] button, the  
track advances ahead to the beginning of the  
next track.  
Pausing play  
1. Press the [  
] button to pause play.  
Track-down  
PAUSE” appears in the display.  
1. Press the [x] button to move back to the  
2. To resume CD play, press the [  
again.  
] button  
beginning of the current track.  
2. Press the [x] button twice to move back to  
the beginning of the previous track.  
Fast-forward/fast-backward  
Fast-forward  
1. Press and hold the [v] button for 1 second  
or longer.  
Fast-backward  
1. Press and hold the [x] button for 1 second  
or longer.  
For MP3/WMA/AAC discs, it takes some time  
until the start of searching and between tracks. In  
addition, the playing time may have a margin of  
error.  
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB  
25  
 
CD/MP3/WMA/AAC Operations  
Folder Select  
This function allows you to select a folder  
containing MP3/WMA/AAC files and start  
playing from the first track in the folder.  
Folder repeat play  
This function allows you to play a track currently  
being played in the MP3/WMA/AAC folder  
repeatedly.  
1. Press and hold the [RPT] button for 1 second  
1. Press the [z] or [w] button.  
or longer to perform folder repeat play.  
Press the [w] button to move the next folder.  
Press the [z] button to move the previous  
folder.  
ALL RPT” appears in the display for 2  
seconds.  
Random play  
This function allows you to play all tracks  
recorded on a disc in a random order.  
2. To select a track, press the [x] or [v]  
button.  
1. Press the [RDM] button to perform random  
Top function  
The top function resets the CD player to the first  
track of the disc. Press the [BND] button to play  
the first track (track No. 1) on the disc.  
play.  
RANDOM” appears in the display for 2  
seconds.  
Folder random play  
In case of MP3/WMA/AAC, the first track of a  
folder being played will be returned.  
This function allows you to play all the tracks of  
all the folders recorded on an MP3/WMA/AAC  
disc in a random order.  
Other various play functions  
Scan play  
This function allows you to locate and play the  
first 10 seconds of all the tracks recorded on a  
disc.  
1. Press and hold the [RDM] button for 1  
second or longer to perform folder random  
play.  
ALL RDM” appears in the display for 2  
seconds.  
1. Press the [SCN] button to perform scan play.  
To cancel play  
1. Press the operating button previously  
selected.  
The various play mode is canceled and the  
various play off mode appears in the display for 2  
seconds.  
SCAN” appears in the display for 2  
seconds.  
Scan play starts from the next track after the  
track currently being played.  
Folder scan play  
This function allows you to locate and play the  
first 10 seconds of the first track of all the folders  
on an MP3/WMA/AAC disc.  
1. Press and hold the [SCN] button for 1  
second or longer to perform folder scan play.  
ALL SCAN” appears in the display for 2  
seconds.  
Folder scan play starts from the next folder  
after the folder currently being played.  
Repeat play  
This function allows you to play the current track  
repeatedly.  
1. Press the [RPT] button to perform repeat  
play.  
REPEAT” appears in the display for 2  
seconds.  
26  
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.  
Operations Common to Each Mode  
Each time you press the [w] or [z] button,  
To change adjustment setting  
the setting changes in the following order:  
MESSAGEONOFF”  
1. Press and hold the [DISP] button for 1  
second or longer to switch to the  
adjustment selection display.  
Entering message information  
Message up to 30 characters long can be stored  
in memory and displayed as a type of screen  
saver setting.  
2. Press the [x] or [v] button to select  
the “item name”.  
The factory default setting is “WELCOME TO  
CLARION”.  
2-1. Select “MSG INP”.  
SETTINGSSCRN SVRMSG  
INPSCROLLDIMMERA-  
CANCELTEL-SELTEL-SP↔  
TEL-SWS-CHECK”  
3-1. Press the [  
] button.  
3-2. Press and hold the [BND] button for 1  
3. Press the [w] or [z] button to select the  
desired setting value”.  
second or longer to clear the old message.  
In the case of display blinking “ENT”, you  
3-3. Press the [x] or [v] button to move the  
can press the [  
setting value.  
] button to adjust the  
cursor.  
3-4. Press the [BND] button to select a  
character type. Each time you press the  
[BND] button, the character type changes  
in the following order:  
After completing settings, press the [DISP]  
button to return to the previous mode.  
Displaying the settings  
Capital letters Numbers Symbols ➜  
Umlaut Capital letters…  
The number of indicator of this unit decreases,  
you can see the state of current settings at any  
operation mode.  
3-5. Press the [w] or [z] button to select the  
desired character.  
2-1. Select “SETTINGS”.  
3-6. Repeat step 3-3 to 3-5 to enter up to 30  
characters for message.  
3-1. Press the [w] or [z] button to display the  
state of current settings.  
3-7. Press and hold the [  
] button for 2  
When the setting is selected, after 1 second  
the current state will be displayed.  
seconds or longer to store the message in  
memory.  
Press and hold the [BND] button for 1  
second or longer to cancel the input  
For example:  
after 1 second,  
message. Then press and hold the [  
]
button for 2 seconds or longer to store the  
message and the message return to default  
setting.  
or  
Setting the method for title scroll  
Set how to scroll in CD-TEXT, MP3/WMA/AAC  
title.  
The factory default setting is “ON”.  
2-1. Select “SCROLL”.  
Turning the screen saver function on  
or off  
This unit is provided with the screen saver  
function which allows you to show various kinds  
of patterns and characters in the operation  
status indication area of the display in a random  
order. You can turn on or off this function. If the  
button operation is performed with the screen  
saver function on, the operation display  
corresponding to the button operation is shown  
for about 30 seconds and the display returns to  
the screen saver display.  
3-1. Press the [w] or [z] button to select “ON”  
or “OFF”.  
• ON:  
To scroll automatically.  
• OFF:  
To scroll just 1 time.  
When you want to see the title again, in the  
title mode, press and hold the [DISP] button  
for 3 seconds or longer to scroll the title.  
The factory default setting is “ON”.  
2-1. Select “SCRN SVR”.  
3-1. Press the [w] or [z] button to select the  
setting.  
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB  
27  
 
Operations Common to Each Mode  
Setting the dimmer control  
You can set the dimmer control “ON” or “OFF”.  
The factory default setting is “ON”.  
2-1. Select “DIMMER”.  
Setting the car speaker output for the  
cellular phone  
The factory default setting is “RIGHT”.  
To output the telephone calls, set the cellular  
phone interrupt to “ON”.  
3-1. Press the [w] or [z] button to select “ON”  
or “OFF”.  
2-1. Select “TEL-SP”.  
3-1. Press the [w] or [z] button to select  
RIGHT” or “LEFT”.  
Setting the external amplifier  
The factory default setting is “OFF”.  
2-1. Select “A-CANCEL”.  
• RIGHT:  
Telephone calls can be heard on the front  
right speaker connected to this unit.  
3-1. Press the [w] or [z] button to select “ON”  
or “OFF”.  
• LEFT:  
• ON:  
Telephone calls can be heard on the front  
left speaker connected to this unit.  
Use with connected AMP.  
• OFF:  
Use with inside AMP.  
Cellular phone interrupt setting  
If you connect this unit and your cellular phone  
with a separately sold cable, you can listen to  
your telephone calls on your car speakers.  
Set the cellular phone connection  
mode (AUX/CeNET)  
You can listen to your telephone calls from the  
speakers connected to this unit.  
The factory default setting is “OFF”.  
2-1. Select “TEL-SW”.  
The factory default setting is “AUX”.  
2-1. Select “TEL-SEL”.  
3-1. Press the [w] or [z] button to select the  
setting. Each time you press the [w] or  
[z] button, the setting changes in the  
following order:  
3-1. Press the [w] or [z] button to select  
AUX” or “CENET”.  
• AUX:  
OFFONMUTE”  
AUX input jack in front panel is for cellular  
phone audio input, when the AUX input  
jack is used to connect an AUX  
BLUETOOTH BB (BLT373) (sold  
separately).  
• OFF:  
This unit continues normal operation even  
when the cellular phone is used.  
• ON:  
You can listen to your telephone calls from  
the speakers connected to this unit.  
• CeNET:  
CeNET input cable is for cellular phone  
audio input, when a CeNET cable is used  
to connect a cellular phone (BLT583) (sold  
separately). See “Bluetooth BB  
Operations” (page 34-36) for details.  
When listening to your calls on your car  
speakers, you can adjust the volume by  
turning the [ROTARY] knob.  
• MUTE:  
The sound from this unit is muted during  
telephone calls.  
Note:  
• If connecting a hands-free kit, please ensure the  
setting is ON to receive the telephone audio  
through the system.  
28  
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.  
Operations Common to Each Mode  
Performing a system check  
This function allows you to perform a system  
check from the adjust mode when required.  
Clearing titles  
1. Select and play a CD in the CD changer for  
which you want to clear the title.  
2-1. Select “S-CHECK”.  
2. Press and hold the [DISP] button for 1  
3-1. Press and hold the [  
second or longer.  
] button for 1  
second or longer.  
3. Press the [x] or [v] button to select  
TITLE IN”.  
S-CHECK” appears in the display, then  
the unit returns to the previous operation  
mode.  
4. Press the [  
] button.  
The display switches to the title input display.  
5. Press and hold the [BND] button for 1  
Entering titles  
second or longer.  
Titles up to 8 characters long can be stored in  
memory and displayed for CD and CD changer.  
The number of titles that can be entered for  
each mode are as follows.  
All characters in the title disappear.  
6. Press and hold the [  
] button for 2 seconds  
or longer to store the setting.  
Mode  
Number of titles  
AUX function  
CD mode  
50 titles  
This system has an external input jack on the  
front panel so you can listen to sounds and  
music from external devices connected to this  
unit.  
CD changer mode  
Number of titles  
DCZ628 connected  
100 titles  
Selecting AUX IN sensitivity  
Make the following settings to select the  
sensitivity when sounds from external devices  
connected to this unit are difficult to hear even  
after adjusting the volume.  
1. Press the [SRC] button to select the mode  
you want to enter a title (CD or CD changer).  
2. Select and play a CD in the CD changer for  
which you want to enter the title.  
3. Press and hold the [DISP] button for 1  
The factory default setting is “MID”.  
1. Press and hold the [DISP] button for 1  
second or longer.  
4. Press the [x] or [v] button to select  
TITLE IN”.  
second or longer.  
2. Select AUX SENS”.  
5. Press the [  
] button.  
3. Press the [w] or [z] button to select  
HIGH”, “MID” or “LOW”.  
Note:  
• When AUX mode is selected, AUX IN sensitivity  
can be set.  
The display switches to the title input display.  
6. Press the [x] or [v] button to move the  
cursor.  
7. Press the [BND] button to select a character  
type. Each time you press the [BND] button,  
the character type changes in the following  
order:  
Capital letters Numbers Symbols ➜  
Umlaut Capital letters…  
8. Press the [w] or [z] button to select the  
desired character.  
9. Repeat steps 6 to 8 to enter up to 8  
characters for the title.  
10.Press and hold the [  
] button for 2 seconds  
or longer to store the title into memory.  
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB  
29  
 
7. ACCESSORIES  
USB/MTP Operations  
• USB memory devices with security functions  
cannot be played.  
USB memory/MTP device operation  
Note:  
• The order in which tracks are recorded may  
differ depending on the USB memory device  
connected (the actual playback order may not  
be the same as that indicated on your  
computer’s display).  
• The following operations are the same as for CD  
mode:  
Pause  
Track selection  
Fast-forward/fast-backward (Except DRM file)  
Top function  
• If you continuously operate folder up/down,  
the play time keeps as “00:00”, and the sound  
is not emitted.  
Scan play  
Repeat play  
Random play  
Folder selection  
About USB Digital Media Streaming  
This unit supports USB Digital Media Streaming.  
USB Digital Media Streaming is a function used  
to play music files transmitted using Media  
Transfer Protocol (MTP). This function also  
supports the playback of WMDRM 10 files.  
See “CD/MP3/WMA/AAC Operations” (page 23-  
26) for details.  
About USB memory  
• USB is an acronym for Universal Serial Bus,  
and refers to an external bus standard  
During USB Digital Media Streaming, the unit  
displays the “MTP” mode indicator.  
supporting data transfer rates of 12 Mbps.  
Use of USB Digital Media Streaming requires  
the purchase of a supported portable audio  
player. For information regarding supported  
portable audio players, consult your nearest  
Clarion dealer, or visit Clarion's website.  
• This unit is compatible with USB 1.1/2.0 with  
maximum data transfer rates of 12 Mbps.  
• USB memory devices that can be played by  
connecting to the unit’s USB cable are limited  
to those recognized as “USB mass storage  
class devices”; operation is not guaranteed  
with all USB memory devices.  
CAUTION  
Devices compatible with “USB Mass Storage  
Class” can be used merely by connecting to  
the host device, without need for special  
drivers or application software.  
• Insert and remove a USB memory/MTP  
device only when the device is not being  
accessed. Connecting or disconnecting  
the device at the following times may  
result in the loss of data:  
• Consult the manufacturer of your USB  
memory device for information regarding  
whether it is supported by “USB Mass  
Storage Class” standards.  
- If the USB memory/MTP device is  
removed or power is disconnected  
during writing to the device.  
- When the device is subjected to static  
electricity or electric noise.  
• Audio files playable on this unit are limited to  
MP3/WMA/AAC files. For details, see the  
section “MP3/WMA/AAC” (page 23).  
• Do not leave a USB memory/MTP device  
unattended in an automobile. Exposure to  
direct sunlight or high temperatures may  
cause deformation or other malfunction of  
the USB memory/MTP device.  
• To prevent the accidental loss of data, always  
back up important data on your computer.  
• This unit does not support connections to a  
computer. In addition, connections made  
through a USB hub device are also not  
supported.  
• When a USB memory device is composed of  
two or more drives, only one of the drives will  
be detected.  
30  
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.  
USB/MTP Operations  
Connecting a USB memory/MTP  
device  
1. Connect the USB memory/MTP device to the  
USB slot.  
To listen to tracks on a connected  
USB memory/MTP device  
1. Press the [SRC] button to switch the source.  
When USB memory/MTP device is selected,  
playback (except DRM files) will begin from  
the location at which playback was  
previously stopped.  
Playback will begin from the first file  
recorded on the device.  
CAUTION  
Do not turn on vehicle ignition when the MTP  
device is connected, since it may result in  
loss or damage to data on the MTP device.  
Connect the MTP device to the USB slot after  
vehicle ignition is turned on.  
When a USB memory/MTP device is  
connected the USB/MTP mode will be  
displayed.  
When a USB memory/MTP device is  
disconnected and then reconnected, playback  
will begin from the beginning of the USB  
memory/MTP device.  
When “MTP” mode is selected, AAC files on  
the MTP device cannot be played.  
To stop play  
1. Press the [SRC] button and switch the  
function to a source other than the USB  
memory/MTP.  
CAUTION  
Do not remove the USB memory/MTP device  
when the USB/MTP mode is selected, since it  
may result in loss or damage to data on the  
USB memory/MTP device.  
Confirm the proper  
orientation of the  
connector before  
inserting.  
Always backup and save important data on  
your computer.  
If the device is not recognized, press the  
[SRC] button to switch the source to the  
device.  
Always insert the device fully into the  
connector. Incomplete connections may  
cause the device not to be recognized.  
2. Remove the USB memory/MTP device from  
the USB slot.  
Depending on the number of tracks recorded,  
some amount of time may be required until all  
tracks are read into the unit.  
The order in which tracks are recorded may  
differ depending on the device connected (the  
actual playback order may not be the same as  
that indicated on your computer’s display).  
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB  
31  
 
iPod Operations  
Note:  
This section describes operations when  
connected to an Apple iPod via the USB slot.  
• The following operations in Play mode operate  
the same as in CD mode:  
Notes:  
Track selection: [x], [v]  
• See the iPod Owner’s Manual for details  
regarding operation conditions.  
• The unit will not operate, or may operate  
improperly with unsupported versions.  
Fast-forward/fast-backward: [x], [v]  
Pause: [  
]
Top function: [BND]  
• For a list of compatible Apple iPod unit with the  
this model, please contact your Clarion dealer or  
See “CD/MP3/WMA/AAC Operations” (page 23-  
26) for details.  
Other various play functions  
(in Play mode)  
Notes:  
• These functions are not supported when in the  
iPod menu mode.  
• The Random function set on the iPod remains the  
same after attachment/detachment of the iPod.  
• The Repeat function on the iPod will be changed  
when you connect/disconnect the iPod to the  
unit.  
Connecting an iPod  
When an iPod is connected to the USB slot,  
“Shuffle” set on the iPod will become as follows:  
• “Shuffle (Albums)” play Random play  
• “Shuffle (Songs)” play All random play  
The iPod has two modes, the “Play mode” and  
the “iPod menu mode” for selecting tracks.  
Switch between these modes by pressing the  
[BND] button for 1 second or longer.  
Repeat play  
Note:  
Play back one track repeatedly.  
• To connect iPod, please use the USB cable  
attached in iPod.  
1. Press the [RPT] button.  
Random play  
Select iPod mode  
1. Press the [SRC] button.  
Play all albums within a selected category, in  
random order. (Corresponds to “Shuffle  
(Albums)” command on iPod.)  
Playback will begin from the last file that was  
played on the iPod.  
1. Press the [RDM] button.  
All random play  
Play all tracks within a selected category, in  
random order. (Corresponds to “Shuffle  
(Songs)” command on iPod.)  
1. Press and hold the [RDM] button for 1  
second or longer.  
To cancel play  
1. Press the same play button once again.  
iPod cable  
Notes:  
Confirm the proper  
orientation of the iPod  
connector before  
inserting.  
• When the repeat play mode is canceled, after  
play all tracks within a selected category,  
playback will begin from the first track in the  
selected category.  
• When playing the last track within a selected  
category in Random mode, if ACC is switched off  
then on again, playback will begin from a  
different track.  
• Though the default setting of an iPod is “All  
Repeat”, the indication on the mode status is not  
displayed.  
32  
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.  
iPod Operations  
Selecting category from the iPod  
menu  
1. Press and hold the [BND] button for 1  
second or longer to select the iPod menu  
mode.  
Selecting category using preset  
memory  
1. Press and hold the [BND] button for 1  
second or longer to select the iPod menu  
mode.  
The iPod menu categories will be displayed.  
The category can be set as follows in the  
[DIRECT] (1-6) buttons.  
Notes:  
[1] : PLAYLIST  
[2] : ARTIST  
[3] : ALBUM  
[4] : SONG  
• Repeat and Random mode operations are not  
supported when in the iPod menu mode.  
• In iPod menu mode, if you press the [x]/[v]  
or [w]/[z] button fast, playback may not be  
performed.  
[5] : GENRE  
[6] : COMPOSER  
2. Press the [w] or [z] button to switch  
between categories.  
The iPod menu categories alternate in the  
following order:  
2. Press the desired [DIRECT] (1-6) button to  
select the category.  
PLAYLISTARTISTALBUM↔  
SONGGENRECOMPOSER”...  
Subfolders may be displayed, depending on  
the category.  
In this case, use the [w] and [z] buttons to  
switch between subfolders, then use the [v]  
button to select the desired subfolder.  
Note:  
The iPod menu mode can be canceled by  
performing one of the following operations:  
• Press the [BND] button.  
3. When the track name display is showing,  
press the [v] button.  
• When the category select screen is displayed,  
Playback will begin from the first track in the  
selected category, and the iPod menu mode  
will be canceled.  
press the [v] button.  
3. Press the [v] button to select the category.  
4. When the track name display is showing,  
Use the [w] and [z] buttons to select a track  
press the [v] button.  
Playback will begin from the first track in the  
selected category, and the iPod menu mode  
will be canceled.  
within a category.  
About title display  
This unit supports the display of title information  
transmitted from a connected iPod.  
Subfolders may be displayed, depending on  
the category.  
• Character code information is UTF-8;  
displayable characters include English  
alphanumerics, some symbols, and some  
umlaut characters.  
In this case, use the [w] and [z] buttons to  
switch between subfolders, then use the [v]  
button to select the desired subfolder.  
When the track name display is showing,  
pressing the [x] button will return to the  
currently playing folder name display.  
• Unsupported characters will be replaced by  
asterisks (*).  
5. Use the [w] and [z] buttons to select a  
track within a category.  
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB  
33  
 
Bluetooth BB Operations  
The CeNET Bluetooth interface adapter  
(BLT583) allows you to utilize your car’s built-in  
audio system for wireless mobile phone  
handsfree communication.  
Call from Phonebook  
User can search the contact name in the  
phonebook and make call.  
Alternatively, user can call from mobile phone.  
The car stereo with BLT583 installed will be able  
to retrieve phonebook contacts, received call,  
dialed call, missed call, incoming and outgoing  
calls.  
1. Press the [BND] button to select “PHONE  
BOOK”.  
2. Press the [v] button to enter the contact  
name mode (In this case, use the [w], [z]  
button to select the desired contact name).  
For details, consult the owner’s Manual  
provided with your CeNET Bluetooth interface  
adapter.(Hereinafter, CeNET Bluetooth  
interface adapter is abbreviated as Bluetooth  
BB.)  
3. When the contact name is displayed, press  
the [v] or [x] button to select the contact  
name’s phone number.  
4. Press the [  
phone No.  
] button to call the mobile  
Basic Operations  
Press the [SOUND] button to end the call.  
Answering a call  
1. You can answer an incoming call by pressing  
any button.  
Select Bluetooth BB  
1. Press the [SRC] button to switch the source.  
Press the [SOUND] button to reject an  
incoming call.  
Making a call  
There are 2 ways to make outgoing call.  
Received/Dialled/Missed Call History  
You can search any Received/Dialled/Missed  
Call History.  
Direct Number Call  
Outgoing call can be made by entering  
telephone numbers directly via the car stereo.  
1. Press the [BND] button to select “RECEIVED  
CALL”, “DIALLED CALL” or “MISSED  
CALL”.  
Telephone number uses 0, 1, 2, 3, 4, 5, 6, 7, 8,  
9, *, #, and +.  
2. Press the [v] button to enter the contact  
name mode (In this case, use the [w], [z]  
button to select the desired contact name).  
1. Press the [BND] button to select “DIAL  
NUMBE”.  
2. Press the [  
] button.  
3. When the contact name is displayed, press  
the [x] or [v] button to select the contact  
name’s phone number.  
3. Press the [x] or [v] button to move the  
cursor.  
4. Press the [w] or [z] button to select the  
4. Press the [  
phone No.  
] button to call the mobile  
numbers.  
5. Press and hold the [  
] button for 1 second  
or longer to call the mobile phone No.  
Press the [SOUND] button to end the call.  
34  
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.  
Bluetooth BB Operations  
PAIR SPECIAL  
To change Bluetooth adjustment  
setting  
This is used for pairing special Bluetooth device  
which cannot carry out pairing in usual pairing  
mode.  
1. Press and hold the [DISP] button for 1  
second or longer to switch to the Bluetooth  
adjustment selection display.  
Please use this pairing mode if your Bluetooth  
device is listed in the menu.  
2-1. Select “PAIR SPECIAL”.  
2. Press the [x] or [v] button to select  
the “item name”.  
3-1. Press the [  
] button, the special  
Bluetooth device is listed in the display.  
PAIRINGPAIR SPECIAL↔  
SELECTDELETEMIC GAIN↔  
RING VOLAUTO ANS↔  
REFUSEA-CONECTPIN  
CODEADDRESSVERSION↔  
PAIRING”…  
4-1. Press the [w] or [z] button to select the  
desired special Bluetooth device.  
5-1. Press and hold the [  
second or longer.  
] button for 1  
6-1. Press the [w] or [z] button to select  
SEARCH” or “WAIT”.  
3. Press the [w] or [z] button to select the  
“desired setting value”.  
The next operation are the same as for  
PAIRING” mode.  
In the case of display blinking “ENT”, you  
can press the [  
setting value.  
] button to adjust the  
SELECT  
This is a setting for user to select one of the  
paired mobile phones.  
After completing settings, press the [DISP]  
button to return to the previous mode.  
2-1. Select “SELECT”.  
3-1. Press the [  
] button, then the paired  
PAIRING  
This option is used to perform Bluetooth pairing  
with the mobile phone.  
mobile phones appears in the display.  
4-1. Press the [w] or [z] button to choose one  
of the 5 devices.  
Up to a maximum of 5 devices can be paired.  
5-1. Press and hold the [  
] button for 1  
2-1. Select “PAIRING”.  
second or longer to connect.  
3-1. Press the [  
] button.  
Connected device will be able to use all the  
functionalities provided.  
4-1. Press the [w] or [z] button to select  
SEARCH” or “WAIT”.  
DELETE  
This is a setting for user to delete one of the  
paired device from the list.  
5-1. Press and hold the [  
second or longer.  
] button for 1  
SEARCH” mode: User can search the  
Bluetooth mobile phone.  
2-1. Select “DELETE”.  
3-1. Press the [  
] button, then the paired  
WAIT” mode: Alternatively User can  
search the Bluetooth BB (BLT583) via the  
mobile phone.  
mobile phones appears in the display.  
4-1. Press the [w] or [z] button to choose one  
of the 5 devices.  
6-1. When you select “SEARCH” mode.  
5-1. Press and hold the [  
] button for 1  
Press the [w] or [z] button to select the  
second or longer to delete the paired  
device.  
Note:  
• Deleted paired device will not automatically  
rearrange in the paired device list.  
desired Bluetooth mobile phone.  
7-1. Press and hold the [  
] button for 1  
second or longer to pair.  
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB  
35  
 
Bluetooth BB Operations  
MIC GAIN  
PIN CODE  
MIC gain can be set by each paired mobile  
phone device. Each registered device has  
unique MIC gain setting.  
This PIN code is used during pairing mode. A  
maximum of 10 digits can be changed through  
the car stereo.  
The factory default PIN code is “1234”.  
2-1. Select “PIN CODE”.  
2-1. Select “MIC GAIN”.  
3-1. Press the [w] or [z] button to change the  
MIC gain setting.  
3-1. Press the [  
] button.  
RING VOL  
This option is used to change the ringing  
volume.  
4-1. Press and hold the [BND] button to clear  
the old PIN code.  
5-1. Press the [x] or [v] button to remove  
the cursor.  
2-1. Select “RING VOL”.  
6-1. Press the [w] or [z] button to select the  
3-1. Press the [w] or [z] button to change the  
desired digits.  
ringing volume.  
7-1. Press and hold the [  
] button for 2  
AUTO ANS  
seconds or longer to store in memory.  
This is a setting to determine whether any  
incoming call will be automatically or manually  
answered.  
The factory default setting is “ON”.  
2-1. Select “AUTO ANS”.  
ADDRESS  
This will hold the unique Bluetooth BB address.  
The address is 12 figures.  
2-1. Select “ADDRESS”.  
3-1. Press the [w] or [z] button to select “ON”  
or “OFF”.  
The Bluetooth BB address 6 figures  
appears in the display.  
ON: Any incoming call is automatically  
answered in 4 seconds.  
3-1. Press the [w] or [z] button to display.  
VERSION  
This will display the software version of the  
Bluetooth BB.  
OFF: User needs to manually answer the  
call.  
REFUSE  
2-1. Select “VERSION”.  
This function allows all incoming calls to be  
refused.  
The Bluetooth BB version appears in the  
display.  
The factory default setting is “OFF”.  
2-1. Select “REFUSE”.  
3-1. Press the [w] or [z] button to select “ON”  
or “OFF”.  
ON: All incoming calls are automatically  
refused.  
OFF: Incoming call notification enabled.  
A-CONECT  
This function allows the Bluetooth BB to be  
connected automatically with previously  
connected device. Connection can be  
established at any source mode.  
The factory default setting is “ON”.  
2-1. Select “A-CONECT”.  
3-1. Press the [w] or [z] button to select “ON”  
or “OFF”.  
ON: Automatic connection is enabled.  
OFF: Automatic connection is disabled.  
36  
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.  
CD Changer Operations  
Note:  
Displaying CD titles  
This unit can display title data for CD-text CDs  
and user titles input with this unit.  
Title data for CD-text CDs can be displayed with  
this unit only when it is connected to DCZ628.  
• The following operations are the same as for CD  
mode:  
Pause  
Track selection  
Fast-forward/fast-backward  
Scan play  
Repeat play  
Random play  
See “CD/MP3/WMA/AAC Operations” (page 23-  
26) for details.  
1. Press the [DISP] button to change the title  
display.  
Notes:  
• If the CD playing is not a CD-text CD or no user  
title has been input, “NO TITLE” appears in the  
display.  
• If a CD-text CD is not input its disc title or a track  
title, “NO TITLE” appears in the display.  
CD changer functions  
When an optional CD changer is connected  
through the CeNET cable, this unit controls all  
CD changer functions. This unit can control a  
total of 2 changers.  
Procedure to scroll a title  
Set “SCROLL” to “ON” or “OFF”.  
(The factory default setting is “ON”. Refer to the  
subsection “Setting the method for title scroll”  
in section “Operations Common to Each  
Mode”.)  
Press the [SRC] button and select the CD  
changer mode to start play. If 2 CD changers  
are connected, press the [SRC] button to select  
the CD changer for play.  
When set to “ON”  
If “NO MAG” appears in the display, insert the  
magazine into the CD changer. “D-CHECK”  
appears in the display while the player loads  
(checks) the magazine.  
The title is automatically kept scrolling.  
When set to “OFF”  
To scroll just 1 time.  
When you want to see the title again, in the title  
mode, press and hold the [DISP] button for 3  
seconds or longer to scroll the title.  
If “NO DISC” appears in the display, eject the  
magazine and insert discs into each slot. Then,  
reinsert the magazine back into the CD changer.  
Note:  
• Some CDs recorded in CD-R/CD-RW mode may  
not be usable.  
Selecting a CD  
1. Press the [w] or [z] button to select the  
desired disc.  
CAUTION  
CD-ROM discs cannot be played from every  
CD changer, it’s depended on the model.  
If a CD is not loaded in a slot of magazine,  
pressing the [w] or [z] button can not work.  
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB  
37  
 
CD Changer Operations  
Disc random play  
Other various play functions  
The disc random play selects and plays  
individual tracks or discs automatically in no  
particular order. This function continues  
automatically until it is cancelled.  
Disc scan play  
Disc scan play locates and plays the first 10  
seconds of the first track on each disc in the  
currently selected CD changer. This function  
continues automatically until it is cancelled.  
Disc scan play is useful when you want to select a  
desired CD.  
1. Press and hold the [RDM] button for 1  
second or longer. “ALL RDM” appears in the  
display and disc random play starts.  
To cancel play  
1. Press the operating button previously  
selected.  
1. Press and hold the [SCN] button for 1  
second or longer. “ALL SCAN” appears in  
the display and disc scan play starts.  
Disc repeat play  
After all the tracks on the current disc have been  
played, disc repeat play automatically replays  
the current disc over from the first track. This  
function continues automatically until it is  
cancelled.  
1. Press and hold the [RPT] button for 1 second  
or longer. “ALL RPT” appears in the display  
and disc repeat play starts.  
38  
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.  
8. TROUBLESHOOTING  
Problem  
Cause  
Measure  
Power does not  
turn on.  
Fuse is blown.  
Replace with a fuse of the same amperage. If the fuse  
blows again, consult your store of purchase.  
(No sound is  
produced.)  
Incorrect wiring.  
Consult your store of purchase.  
No sound output Power antenna lead is  
1. Turn the unit off.  
when operating  
the unit with  
amplifiers or  
power antenna  
attached.  
shorted to ground or  
2. Remove all wires attached to the power antenna  
lead. Check each wire for a possible short to  
ground using an ohm meter.  
excessive current is required  
for remote-on the amplifiers  
or power antenna.  
3. Turn the unit back on.  
4. Reconnect each amplifier remote wire to the power  
antenna lead one by one. If the amplifiers turn off  
before all wires are attached, use an external relay  
to provide remote-on voltage (excessive current  
required).  
Nothing happens The microprocessor has  
Turn off the power, then press the  
Reset button  
when buttons are malfunctioned due to noise, [RELEASE] button and remove  
pressed.  
etc.  
the DCP.  
Press the reset button for about 2  
seconds with a thin rod.  
Display is not  
accurate.  
DCP or main unit connectors Wipe the dirt off with a soft cloth moistened with  
are dirty. cleaning alcohol.  
No sound heard  
No sound heard  
The speaker protection circuit 1. Turn down sound volume. Function can also be  
is operating.  
restored by turning the power off and on again.  
(Speaker volume is reduced automatically when  
the speaker protection circuit operates).  
2. If the sound is muted again, consult our service  
department.  
MP3/WMA/AAC files are  
absent in a disc.  
Write MP3/WMA/AAC files onto the disc properly.  
Files are not recognized as  
an MP3/WMA/AAC file.  
Use MP3/WMA/AAC files encoded properly.  
File system is not correct.  
Use ISO9660 level 1, 2 or JOLIET or Romeo or  
APPLE ISO file system.  
Sound skips or is Compact disc is dirty.  
Clean the compact disc with a soft cloth.  
noisy.  
Compact disc is heavily  
Replace with a compact disc with no scratches.  
scratched or warped.  
Sound is cut or  
skipped.  
MP3/WMA/AAC files are not Use MP3/WMA/AAC files encoded properly.  
encoded properly.  
Noise is  
generated or  
noise is mixed  
with sound.  
Sound is bad  
directly after  
power is turned  
on.  
Water droplets may form on Let dry for about 1 hour with the power on.  
the internal lens when the car  
is parked in a humid place.  
Wrong filename  
File system is not correct.  
Use ISO9660 level 1, 2 or JOLIET or Romeo or  
APPLE ISO file system.  
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB  
39  
 
Problem  
Cause  
Measure  
No sound heard  
The device contains no MP3/ Record MP3/WMA/AAC files properly to the device.  
WMA/AAC files.  
The files are not proper MP3/ Use only properly encoded MP3/WMA/AAC files.  
WMA/AAC format.  
Connectors are loose.  
Disconnect the device and reconnect securely.  
Sound is  
The MP3/WMA/AAC files are Use only properly encoded MP3/WMA/AAC files.  
interrupted or has improperly encoded.  
noise.  
The device isn’t  
recognized.  
The device is damaged.  
Connectors are loose.  
Disconnect the device and reconnect. If the device is  
still not recognized, try replacing with a different  
device.  
According to the state of  
operation on the device, the  
communication fault is  
caused.  
Disconnect the device and reconnect.  
Can’t insert the  
device.  
The device has been inserted Try reversing the connection direction of the device  
improperly.  
(usually the brand name surface should be facing  
left).  
The connector is broken.  
Replace with a new device.  
40  
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.  
9. ERROR DISPLAYS  
If an error occurs, one of the following displays is displayed.  
Take the measures described below to eliminate the problem.  
Error Display  
ERROR 2  
Cause  
A CD is caught inside the CD This is a failure of CD deck’s mechanism and consult  
deck and is not ejected. your store of purchase.  
Measure  
ERROR 3  
ERROR 6  
A CD cannot be played due Replace with a non-scratched, non-warped-disc.  
to scratches, etc.  
A CD is loaded upside-down Eject the disc then reload it properly.  
inside the CD deck and does  
not play.  
ERROR 2  
ERROR 3  
A CD inside the CD changer This is a failure of CD changer’s mechanism and  
is not loaded.  
consult your store of purchase.  
A CD inside the CD changer Replace with a non-scratched, non-warped disc.  
cannot be played due to  
scratches, etc.  
ERROR 6  
A CD inside the CD changer Eject the disc then reload it properly.  
cannot be played because it  
is loaded upside-down.  
ERROR 2  
ERROR 3  
The files are not proper MP3/ Use only properly encoded MP3/WMA/AAC files.  
WMA/AAC format.  
The MP3/WMA/AAC files are Use only properly encoded MP3/WMA/AAC files.  
(USB/MTP mode) improperly encoded.  
ERROR 3  
(iPod mode)  
The iPod contains no audio Insert an iPod containing audio files.  
files.  
CUR ERR  
Overcurrent detection.  
Disconnect the devices and reconnect. If the devices  
are still not recognized, try replacing with a different  
devices.  
HUB ERR  
Do not support the HUB  
devices.  
Do not use the HUB devices.  
If an error display other than the ones described above appears, press the reset button. If the problem  
persists, turn off the power and consult your store of purchase.  
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB  
41  
 
10.SPECIFICATIONS  
Radio section  
Tuning System: PLL synthesizer tuner  
General  
Output Power: 19 W  
4 (DIN 45324, +B=14.4V)  
Receiving Frequencies:  
Power Supply Voltage:  
FM : 87.5 to 108 MHz (0.05 MHz steps)  
MW : 531 to 1602 kHz (9 kHz steps)  
LW : 153 to 279 kHz (3 kHz steps)  
14.4 V DC (10.8 to 15.6 V allowable),  
negative ground  
Power Consumption: Less than 15 A  
Speaker Impedance: 4 Ω (4 to 8 Ω allowable)  
Weight:  
CD player section  
System: Compact disc digital audio system  
Frequency Response: 20 Hz to 20 kHz ( 1 dB)  
Signal to Noise Ratio: 100 dB (1 kHz)  
Dynamic Range: 80 dB (1 kHz)  
Distortion: 0.03%  
Main unit: 1.16 kg  
Remote control unit: 40 g (including battery)  
Dimensions:  
Main unit:  
178 (W) 50 (H) 155 (D) mm  
Remote control unit:  
44 (W) 113 (H) 11 (D) mm  
Note:  
• Specifications and design are subject to change without notice for further improvement.  
11.OTHERS  
WMDRM 10 for devices  
• This product is protected by certain  
intellectual property rights of Microsoft. Use  
or distribution of such technology outside of  
this product is prohibited without a license  
from Microsoft.  
• Content owners use Windows Media digital  
rights management technology (WMDRM) to  
protect their intellectual property, including  
copyrights. This device uses WMDRM  
software to access WMDRM-protected  
content. If the WMDRM software fails to  
protect the content, content owners may ask  
Microsoft to revoke the software’s ability to  
use WMDRM to play or copy protected  
content. Revocation does not affect  
unprotected content. When you download  
licenses for protected content, you agree that  
Microsoft may include a revocation list with  
the licenses. Content owners may require you  
to upgrade WMDRM to access their content.  
If you decline an upgrade, you will not be able  
to access content that requires the upgrade.  
42  
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.  
TEL :+49-6105-977-0  
FAX :+49-6105-977-399  
CE DECLARATION o f CONFORMITY  
We Clarion Europa GmbH  
(supplier's name)  
Hessenring 19-21, 64546 Mörfelden-Walldorf, GERMANY  
(address)  
declare under our sole responsibility that the product  
CAR RADIO with CD PLAYER  
MODEL: DXZ388RUSB,DXZ389RUSB,DXZ389RGUSB ꢀ ꢀ  
Product code:PE3046 (differ: illumination)ꢀ ꢀ  
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ  
TYPE: 1043213  
(name, type or model, possibly sources and numbers of items)  
to which this declaration relates is in conformity with the following  
standard(s) or other normative document(s)  
EN 55013:2001 + A1, EN 55020:2002 + A1  
(title and/or number and date of issue of the standard(s) or  
other normative document(s))  
(if applicable) following the provisions of 2004/108/EC Directive.  
ꢀꢀꢀAnd following the provisions of 2004/104/EC  
according to paragraph 3.2.9 of Annex I,  
meets the limits defined in paragraph 6.5, 6.6, 6.8 and 6.9 of Annex I  
Directive,  
(supplier's comment)  
Mörfelden-Walldorf GERMANY  
30 OCT 2007ꢀ  
(Place and date of issue)  
Susumu Yamakawa  
President  
(name and signature or equivalent  
marking of authorized person)  
RefNo 07RCOC001C3 D.F.DQC07A157  
Clarion Co., Ltd.  
Printed in China / Imprimé en Chine / Gedruckt in China / Stampato in Cina  
Gedrukt in China / Impreso en China / Tryckt i Kina / Impresso na China  
All Rights Reserved. Copyright © 2007: Clarion Co., Ltd.  
PE-3046E  
280-8583-00  
2007/12  
 

Contec Computer Hardware AD12 16PCIE User Manual
Crate Amplifiers Musical Instrument Amplifier B10 XL User Manual
Creda Oven REFLECTION User Manual
Delta Electronics Power Supply MPO13X User Manual
Delta Electronics Power Supply Series E36SR User Manual
Delta Electronics Power Supply SIL520 User Manual
Dynex Switch DX VS201A User Manual
Electro Voice Speaker System HP640 User Manual
Fisher Price High Chair W4120 User Manual
Gitzo Camcorder Accessories G1257LVL User Manual