Accusplit Fitness Electronics AE180XL User Manual

ACCUSPLIT®EAGLE  
AE180XL  
PEDOMETER  
ACCUSPLIT, Inc.  
3090 Independence Drive, Suite 148  
Livermore, CA 94551 USA  
800-935-1996 • 925-290-1900 • FAX 925-290-1930  
www.ACCUSPLIT.com • support@ACCUSPLIT.com  
Eat Right! Walk More! Live Well!  
e ACCUSPLIT Lifestyle  
970-089  
Nov 07  
Operating Instructions  
Functions  
Key Features  
Step counter.  
Built around the Japanese-made JW200 PedometerEngine™  
Step Sensor, the current gold standard for accuracy.  
Automatic ActivityTimer.  
Distance in mi or km.  
Clock.  
Extra Large Digits.  
The ACCUSPLIT exclusive case makes this the slimmest  
available pedometer built around the JW200 Step Sensor.  
For complete Function Specifications, go to page 26.  
Chromed, Spring Steel clip resists breakage.  
Case includes two leash slots, for attaching safety leash  
on either side. Made from tough polycarbonate plastic.  
Step filter, can be set from 0-5 steps to further increase  
accuracy.  
2
3
HOWTO OPENYOUR PEDOMETER  
See diagrams at right.  
USE IT NOW!  
Your pedometer is preset with standardized settings  
that allow you to use it now!You can customize the  
settings later. Skip to pages 15-18 to use it now!  
The cover must be closed for the  
pedometer to work.  
SETTING UPYOUR PEDOMETER  
Its a good idea to set up your pedometer before first using it.  
To record your distance accurately, you will need to set your  
stride length.You may also wish to set the clock to the correct  
time of day.  
See page 9 when you are ready to set up your unit.  
4
5
DIST: DISTANCE mode shows distance traveled  
Getting Acquainted  
(mi/km).  
Press the MODE button to cycle through the display  
modes (Steps, ActivityTime, …).  
: CLOCK mode shows time of day.  
See page 18 and Specifications for details.  
Mode  
indicator  
The RESET button sets your counts back to zero.  
See page 19 for details.  
DIGI-WALKERXL.COM  
STEP TIME DIST  
Steps  
Counted  
MODES  
MY  
MEMORY  
STEP: STEP mode shows step count.  
TIME: AUTO ACTIVITYTIMER MODE shows total  
activity time in min and sec.  
MODE Button  
180  
XL  
JW200  
S3-  
S1,S2,S4  
S3+  
6
7
RESET Button (yellow)  
MEMORY Button  
 
First, loop leash  
through slot on side  
of pedometer  
To avoid losing or dropping your pedometer, use the included  
leash and clip to fasten the pedometer securely to your  
clothing.  
Next, clasp clothing  
Attaching the Leash  
1. Attach the pedometer to the leash by looping the thin  
side of the leash through one of the leash slots on the  
sides of the pedometer case, near the bottom of the unit.  
2. Put the pedometer onto your clothing as discussed above.  
3. Attach the alligator clip to a belt loop or the top edge of the  
pants or skirt.  
Note: You can also use a safety pin to fasten the leash to  
your clothing, loop the leash through your belt or belt  
loop, or use a badge holder.  
16  
Or, loop a belt  
or belt loop  
Or, loop a  
badge holder, then  
put into pocket  
(Badge holder  
not included)  
17  
VIEWINGYOUR RESULTS  
RESETTINGYOUR PEDOMETER  
Once you put on your pedometer with the cover closed, it  
will automatically begin to record your steps, activity time,  
distance, and calories burned. Repeatedly press the MODE  
button to cycle through the pedometer modes:  
Most people prefer to reset counts daily.To reset your counts:  
From STEP, TIME, or DISTANCE mode, press and hold the  
yellow RESET button for at least 2 seconds.You’ll see the  
values all go back to zero.  
STEPS gTIME g DISTANCE g CLOCK g STEPS  
Time and Distance are counted automatically whenever steps  
are being counted.  
TIME is time spent in step activity.  
DISTANCE is simply stride length x steps.  
Note: For extra accuracy, the default Step Filter Setting is 1.  
See page 21 to learn more.  
18  
19  
OTHER SETTINGS  
The Step Filter and Unit of Measurement settings are  
accessed through a special “deep set” mode.  
CHANGING STEP FILTER SETTING  
While the JW200 PedometerEngine™ Step Sensor is  
extremely accurate, some people like to have the ability to  
filter out false steps. Therefore, the unit has a variable setting  
step filter, to allow fine-tuning to your specific preferences.  
You can set the value to any value from 0 – 5 steps. For  
example, if the filter is set to “3, the unit will wait to start  
counting steps until more than three steps have been taken in  
less than five seconds.  
To enter this mode, press and hold the S1 button for 4  
seconds.The screen will display a single digit. From within  
Deep Set mode, press the S2 button to cycle back and forth  
between the Step Filter set point and Choice of Unit System.  
Press S3+ (MODE) or S3– (RESET) to change the Step Filter  
Setting.  
21  
DIGI-WALKERXL.COM  
STEP TIME DIST  
Can be set  
CHANGING UNITS (English vs. Metric)  
from 0-5  
The Pedometer can display either in English units (in, mi, and lb  
- this is the default), or in Metric units (cm, km, and kg). From within  
Deep Set mode (see pg. 25), press the S2 button to cycle back and  
forth between setting the Step Filter set point and Choice of Unit  
System.The unit will show either “US” or “EU” (for European Union)  
depending on the unit system chosen. If you change units after using  
the pedometer, the unit will convert all of your data into the new unit  
system when you exit Deep Set model.You can check to see which  
system of units you are using by seeing which measurement units  
are displayed on the Stride and Weight setting screens.  
steps  
“US” (English)  
or “EU” (Metric)  
DIGI-WALKERXL.COM  
STEP TIME DIST  
180  
XL  
JW200  
S3-  
S1,S2,S4  
S3+  
Set Step Filter set point  
Press S3+ (MODE) or S3– (RESET) to change the Measurement Mode.  
Press and hold S4 for 2 seconds to exit Deep Set Mode.  
180  
XL  
JW200  
S3-  
S1,S2,S4  
S3+  
Note:The unit will save any changes and exit set mode after 30  
22  
23  
Set measurement mode  
seconds unattended.  
 
To replace the battery:  
REPLACINGTHE BATTERY AND MASTER RESET  
When the display starts to dim or goes blank, it is time to  
replace the battery.  
1. Insert a coin into the slot on the  
bottom of the case, and twist to  
loosen the faceplate. Remove  
faceplate and set aside.  
If the display is not uniformly dim or blank, and appears to  
display “erroneous data, do a Master Reset by pressing all  
3 buttons simultaneously for 3 seconds and then release.  
The display should go blank, then turn all segments on, then  
display 0 steps in Step Mode.  
2. Locate the battery holder as seen  
on sketch. Pull out the old battery,  
and push a new LR-44 battery into the holder,  
with positive terminal (+) facing up.  
Battery  
Note: All the settings will return to their default setting values.  
If you need to change the battery, the settings will also revert  
to default settings.  
3. Snap faceplate back into place, hooking the bottom  
two tabs first, then closing by pressing together at the  
top two tabs.  
24  
25  
27  
29  
12 Hour Clock (default setting is 10.00am).  
SPECIFICATIONS, FEATURES, and FUNCTIONS  
Description of Functions  
Adjustable Step Filter (default setting is 1 step, but can  
be set from 0-5 steps) to increase step count accuracy.  
Switchable between English and Metric units, without  
losing data (default setting is English units).  
Counts Steps up to 99,999 then rollover.  
CountsTime spent in step activity, up to 999 Min 59 sec,  
then rollover. Automatically counts whenever step activity  
is occurring.  
Counts distance traveled during step activity, up to  
999.99 mi or km, then rollover. Automatically counts  
whenever step activity is occurring.  
Adjustable stride length for greater distance accuracy  
(default setting is 21 in/53 cm, but can be set from 12-72 in  
(30-180 cm), in 0.25 in / 1 cm increments.  
26  
28  
30  
Email (preferred)  
User  
REGISTER NOW Please return  
your AE180XL Registration to  
the Repair Center address in the  
warranty, and we will let you know  
about future products.  
NO-PROOF-OF-PURCHASE LIMITEDWARRANTY  
Free service for first year of ownership;  
$12 fee for service thereafter. See label inside unit for date.  
INDEX  
Battery, replacing . . . . 25-26  
Clock, setting. . . . . . . . 13-14  
Current days results,  
viewing . . . . . . . . . . . . . .20  
Setting Mode, exiting . . . .14  
Open your pedometer . . . .4  
Safety Leash . . . . . . . . 18-19  
Setting up pedometer. . 5-12  
Step Filter Setting,  
change . . . . . . . . . . . 21-22  
Stride Length,  
setting. . . . . . . . . . . . 10-12  
Unit of measure,  
changing. . . . . . . . . . . . .23  
Wearing pedometer . . . . .15  
Warranty . . . . . . . . . . . . . .29  
31  
 

Adaptec Personal Computer T645UK User Manual
ADTRAN Power Supply ATLAS 890 User Manual
ADTRAN Switch HTU C 3192 User Manual
Advantek Networks Switch ANS 24RV User Manual
AMX Stereo Amplifier DAS LLC User Manual
Audiovox Car Stereo System ACD 84 User Manual
AVerMedia Technologies TV Receiver MCE 2005 User Manual
Avital Automobile Alarm Model 4300 User Manual
Avocent Switch DSR2010 User Manual
Beckett Water Gardening Plumbing Product M250A User Manual