Accusplit Fitness Electronics 970 046 User Manual

ACCUSPLIT®  
EAGLE1590  
OPERATING INSTRUCTIONS  
Congratulations on taking the first step to wellness with your  
purchase of an ACCUSPLIT pedometer. It’s easy to set up your  
new pedometer. Just follow the steps below, and start walking!  
PEDOMETER  
DISPLAY MODES  
• STEP: STEP mode shows your  
step count since last reset, up  
to 1,000,000 steps.  
• DIST: DISTANCE mode shows  
distance walked or jogged since  
last reset.  
SETTING UPYOUR PEDOMETER  
WEARINGYOUR PEDOMETER  
To record your distance and calories  
accurately, you will need to set your stride  
length and body weight.  
While gently holding the belt clip open, slide  
the pedometer onto your belt or the top edge  
of your pants or skirt. It should fit snugly and  
level, above one knee.  
• CAL: CALORIE mode shows  
calories burned through step  
activity since last reset.  
: CLOCK mode shows time of day.  
FindingYour Stride Length: Your stride  
length is the length of one of your steps,  
measured from “toe to toe.” To measure,  
walk 10 steps with your normal stride and  
measure the TOTAL DISTANCE from the  
toe of your starting step to the toe of your  
10th step (see diagram below). Divide the  
Note: The pedometer should be as vertical as  
possible. Walkers with larger stomachs may  
find it helpful to wear the pedometer farther  
back on the body, toward one hip. The cover  
must be closed for the pedometer to work.  
To avoid losing or dropping your pedometer,  
use the included leash and clip to fasten the  
: ACTIVITY TIMER MODE  
shows total activity time in minutes  
and seconds since last reset. The  
timer runs automatically whenever  
steps are being recorded.  
TOTAL DISTANCE by 10. This is your stride pedometer securely to your clothing.  
length. Example: If you walk 22 feet, your  
• SCAN MODE: Rotates between  
showing steps, distance, calories  
and activity time.  
stride length is 2.2 feet.  
Attaching the Leash: Attach the pedometer  
to the leash by looping the leash around the  
pedometer belt clip. Next, clasp the waistband  
of your clothing with the attached clip. You can  
also use a safety pin to fasten the leash to  
your clothing, or loop the leash through your  
Current mode  
arrow indicator  
SettingYour Stride Length: Press the  
black MODE button until arrow at the top  
of display points to “DIST.” Press the gray  
SET button once to enter setting mode.  
CAL DIST  
STEP  
Display will shift to show stride (for example, belt or belt loop.  
“F 1.95” means stride is set to 1.95 feet).  
Press the gray SET button to increase stride  
S
C
A
N
ACTIVITY  
PEDOMETER  
TW15G  
1590  
ACCUSPLIT EAGLE  
First, loop the  
pedometer clip  
length. Press the yellow RESET button to  
decrease stride length. Press the black  
MODE button to exit setting mode.  
SET  
RESET  
(2S)  
MODE  
Next, loop the metal  
clip, then clasp clothing  
SettingYour Weight: Press the black MODE  
button until arrow at the top of the display  
points to “CAL.” Press the gray SET button  
once to enter setting mode. Display will shift  
to show weight in pounds. For example, “L  
165” means weight is set to 165 lbs. Press  
the gray SET button to increase weight  
setting. Press the yellow RESET button to  
decrease weight setting. Press black MODE  
button to exit weight setting mode.  
Yellow:  
RESET  
Black:  
MODE  
Gray:  
SET  
AUTO MOVEMENT SENSOR  
1. To lter out random movements, the  
unit remains in standby mode until  
5 continuous steps are registered.  
Only then are the 5 steps calculated  
in, and an Active indicator “”  
Or, loop a  
badge holder, then  
appears on the upper left of display.  
put into pocket  
(Badge holder  
not included)  
Setting the Clock: Press the black MODE  
button until the arrow on the top of display  
points to clock icon . Press the gray SET  
button once to enter clock setting mode,  
clock readout will flash. Press the yellow  
RESET button to advance hours. Press the  
gray SET button to advance minutes. Press  
black MODE button to exit clock setting  
mode.  
2. When regular walk/run movement  
stops, after 2 seconds the timer  
pauses and the unit switches to  
standby status (Active indicator “”  
disappears).  
Or, loop a belt or belt loop  
VIEWINGYOUR RESULTS  
Once you put on your pedometer with the  
cover closed, it will automatically begin to  
record your steps, distance, calories burned,  
and activity time. Repeatedly press the  
black MODE button to cycle through the  
pedometer modes:  
RESETTINGYOUR PEDOMETER  
Most people prefer to reset step, distance,  
and calorie counts daily. To reset: From  
STEP, DISTANCE, or CALORIE mode,  
press and hold the yellow RESET button  
for at least 2 seconds.  
Note: display will show “A” for AM and  
“P” for PM.  
STEPS DISTANCE CALORIES →  
TIME OF DAY ACTIVITY TIMER →  
SCAN STEPS  
10 steps  
ACCUSPLIT, Inc. • 6120 Stoneridge Mall Rd., Suite 210 • Pleasanton, CA 94588 USA  
970-046  
 

3M MP3 Player 78 6970 9477 5 C User Manual
Aastra Telecom IP Phone 6730I User Manual
Acu Rite Thermometer 00277DIX User Manual
Alto Shaam Food Warmer 100 HSL BCS 2 User Manual
Amana Range AGG200AA User Manual
Avital Universal Remote 5303 User Manual
Axis Communications Security Camera P3384 V User Manual
Axor Indoor Furnishings 39293XXX User Manual
Ayre Acoustics Universal Remote Backlit Remote User Manual
Bahco Tool Storage MS7056ENG User Manual