StarTechcom Power Supply ATXPOWER400 User Manual

POWER SUPPLY  
Reliable 400 Watt Replacement ATX  
Power Supply  
ATXPOWER400  
Instruction Guide  
* Actual product may vary from photo  
Revised: June 9, 2003  
The Professionals’ Source For Hard-to-Find Computer Parts  
 
1
4
Product Specifications  
Table of Contents  
Dimensions  
Output Power  
Hold-Up Type  
Fan Type  
5.9 x 3.35 x 5.87 in. (150 x 85 x 149mm)  
400W  
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
< 16 ms @ full load  
Sleeve bearing  
Connectors  
6 x 4-pin-LP4-female  
2 x small-internal-power  
1 x 20-pin-ATX-motherboard-adapter  
1 x 4-pin extended ATX power 12V plug and Aux  
plug for Pentium 4  
MTBF  
100,000 Hours @ 25ºC  
Safety Approvals  
AC INPUT  
TUV, UL, CSA, CE, FCC, CB  
Voltage 115V~ Current 8A  
Voltage 230V~ Current 4A  
Frequency 50~60Hz  
DC OUTPUT  
+3.3V(30A)  
+5V(40A)  
+12V(18A)  
-5V(1A)  
-12V(1A)  
+5V Standby (2.5A)  
 
2
3
Introduction  
Installation  
Thank you for buying a StarTech.com 400-Watt replacement power supply. The  
ATXPOWER400 is guaranteed compatible with Intel and AMD processors and designed  
for an extra long-life in personal and industrial computers. This power supply ensures  
stable system performance and uses an automatic temperature control fan to maintain an  
optimal operating environment for heat-sensitive components.  
Check the red power supply voltage switch before installation. It should be the same as  
your local power voltage (115V for North America and 230V for most of the European  
countries). Change the voltage setting if necessary.  
1. Make sure that your system is turned off and unplugged. Disconnect the power cord  
from your old power supply.  
Features  
2. Open the case (consult your computers user guide for details, if necessary).  
Automatically detects temperature and adjusts fan speed to maintain optimal  
performance  
NOTE: Before completing the next step, you may want to take note of what devices are  
attached to your current power supply so you know which devices need to be connected  
to the new power supply and where their connectors are located.  
Provides extra power capacity for PC servers with several hard drives  
Provides the extra current required by 1 GHz and faster CPUs  
Provides extra power required by leading edge 3D video accelerator cards  
Provides extra current and power capacity for overclocking CPUs  
3. Disconnect all power connectors from the motherboard and the peripheral devices  
such as hard drives, floppy disks, etc. Make sure that there are no devices connected  
to your existing power supply.  
4. Remove the existing power supply from your computer case and replace it with the  
new StarTech.com power supply.  
Uses superior EMI/ RFI power filtration system to ensure system components receive  
clean, stable power  
5. Connect the power connectors to your motherboard and peripheral devices.  
6. Close your computer case.  
Backed by StarTech.coms two-year warranty  
7. Connect the power cord to the StarTech.com power supply.  
WARNING! Computer parts can be severely damaged by static electricity. Be sure that  
you are properly grounded before opening your computer case. StarTech.com  
recommends that you wear an anti-static strap when installing any computer  
component. If an anti-static strap is unavailable, discharge yourself of any static  
electricity build-up by touching a large grounded metal surface (such as the computer  
case) for several seconds. Also make sure that your computer is turned off and  
unplugged before attempting to open your computer case.  
ATXPOWER400 Connectors  
Contents  
This package should contain:  
1 x ATXPOWER400 power supply  
1 x power cord  
 

Shark Vacuum Cleaner EP035 User Manual
Sharp Cable Box LC 42RD2EA User Manual
Singer Sewing Machine CLASS 99 User Manual
Sony Camera Lens 16 50mm User Manual
Sony Camera Lens SAL35F14G User Manual
Sony Computer Monitor CPD E215E User Manual
Sony CRT Television KP 41S4G User Manual
Sony Ericsson VCR NSP 1 User Manual
Sony Laptop VPCW21 User Manual
StarTechcom Computer Hardware 1 port pci express ide controller adapter card User Manual