Sony Home Theater System BDV EF1100 User Manual

4-446-737-11(1)  
Blu-ray Disc™/  
DVD Home Theatre  
System  
Operating Instructions  
BDV-EF1100  
 
Europe Only  
Notice for customers: the following  
information is only applicable to equipment  
sold in countries applying EU directives.  
This product has been manufactured by or on  
behalf of Sony Corporation, 1-7-1 Konan  
Minato-ku Tokyo, 108-0075 Japan. Inquiries  
related to product compliance based on  
European Union legislation shall be addressed  
to the authorized representative, Sony  
Deutschland GmbH, Hedelfinger Strasse 61,  
70327 Stuttgart, Germany. For any service or  
guarantee matters, please refer to the  
Disposal of waste  
batteries (applicable in  
the European Union  
and other European  
countries with  
separate collection  
systems)  
This symbol on the battery or on the  
packaging indicates that the battery provided  
with this product shall not be treated as  
household waste.  
On certain batteries this symbol might be used  
in combination with a chemical symbol. The  
chemical symbols for mercury (Hg) or lead  
(Pb) are added if the battery contains more  
than 0.0005% mercury or 0.004% lead.  
By ensuring these batteries are disposed of  
correctly, you will help prevent potentially  
negative consequences for the environment  
and human health which could otherwise be  
caused by inappropriate waste handling of the  
battery. The recycling of the materials will  
help to conserve natural resources.  
addresses provided in the separate service or  
guarantee documents.  
Hereby, Sony Corp., declares that this  
equipment is in compliance with the essential  
requirements and other relevant provisions of  
Directive 1999/5/EC.  
For details, please access the following URL:  
In case of products that for safety,  
Precautions  
performance or data integrity reasons require a  
permanent connection with an incorporated  
battery, this battery should be replaced by  
qualified service staff only.  
To ensure that the battery will be treated  
properly, hand over the product at end-of-life  
to the applicable collection point for the  
recycling of electrical and electronic  
equipment.  
For all other batteries, please view the section  
on how to remove the battery from the product  
safely. Hand the battery over to the applicable  
collection point for the recycling of waste  
batteries.  
For more detailed information about recycling  
of this product or battery, please contact your  
local Civic Office, your household waste  
disposal service or the shop where you  
purchased the product.  
This equipment has been tested and found to  
comply with the limits set out in the EMC  
Directive using a connection cable shorter  
than 3 meters. (Europe models only)  
On power sources  
• The unit is not disconnected from the mains  
as long as it is connected to the AC outlet,  
even if the unit itself has been turned off.  
• As the main plug is used to disconnect the  
unit from the mains, connect the unit to an  
easily accessible AC outlet. Should you  
notice an abnormality in the unit, disconnect  
the main plug from the AC outlet  
immediately.  
3GB  
 
• Cinavia Notice  
On watching 3D video  
images  
This product uses Cinavia technology to  
limit the use of unauthorized copies of some  
commercially-produced film and videos and  
their soundtracks. When a prohibited use of  
an unauthorized copy is detected, a message  
will be displayed and playback or copying  
will be interrupted.  
More information about Cinavia technology  
is provided at the Cinavia Online Consumer  
Information Center at  
additional information about Cinavia by  
mail, send a postcard with your mailing  
address to: Cinavia Consumer Information  
Center, P.O. Box 86851, San Diego, CA,  
92138, USA.  
Some people may experience discomfort  
(such as eye strain, fatigue, or nausea) while  
watching 3D video images. Sony recommends  
that all viewers take regular breaks while  
watching 3D video images. The length and  
frequency of necessary breaks will vary from  
person to person. You must decide what works  
best. If you experience any discomfort, you  
should stop watching the 3D video images  
until the discomfort ends; consult a doctor if  
you believe necessary. You should also  
review (i) the instruction manual and/or the  
caution message of any other device used  
with, or Blu-ray Disc contents played with this  
product and (ii) our website  
information. The vision of young children  
(especially those under six years old) is still  
under development. Consult your doctor (such  
as a pediatrician or eye doctor) before  
allowing young children to watch 3D video  
images.  
Adults should supervise young children to  
ensure they follow the recommendations  
listed above.  
Copyrights and Trademarks  
• This system incorporates with Dolby*  
Digital and the DTS** Digital Surround  
System.  
* Manufactured under license from  
Dolby Laboratories. Dolby and the  
double-D symbol are trademarks of  
Dolby Laboratories.  
**Manufactured under license under  
U.S. Patent Nos: 5,956,674;  
Copy Protection  
5,974,380; 6,226,616; 6,487,535;  
7,212,872; 7,333,929; 7,392,195;  
7,272,567 & other U.S. and worldwide  
patents issued & pending. DTS-HD,  
the Symbol, & DTS-HD and the  
Symbol together are registered  
trademarks of DTS, Inc. Product  
includes software. © DTS, Inc. All  
Rights Reserved.  
• Please be advised of the advanced content  
protection systems used in both Blu-ray Disc  
and DVD media. These systems, called  
AACS (Advanced Access Content System)  
and CSS (Content Scramble System), may  
contain some restrictions on playback,  
analog output, and other similar features.  
The operation of this product and the  
• This system incorporates High-Definition  
restrictions placed may vary depending on  
the date of purchase, as the governing board  
of the AACS may adopt or change its  
restriction rules after the time of purchase.  
TM  
Multimedia Interface (HDMI  
technology.  
)
The terms HDMI and HDMI High-  
Definition Multimedia Interface, and the  
HDMI Logo are trademarks or registered  
trademarks of HDMI Licensing LLC in the  
United States and other countries.  
• Java is a trademark of Oracle and/or its  
affiliates.  
4GB  
 
®
®
• “DVD logo” is a trademark of DVD Format/  
Logo Licensing Corporation.  
• Wi-Fi , Wi-Fi Protected Access and Wi-Fi  
®
Alliance are registered marks of the Wi-Fi  
Alliance.  
• “Blu-ray Disc”, “Blu-ray”, “Blu-ray 3D”,  
“BD-LIVE”, “BONUSVIEW”, and logos  
are trademarks of the Blu-ray Disc  
Association.  
• Wi-Fi CERTIFIED™, WPA™, WPA2™  
and Wi-Fi Protected Setup™ are marks of  
the Wi-Fi Alliance.  
• “Blu-ray Disc”, “DVD+RW”, “DVD-RW”,  
“DVD+R”, “DVD-R”, “DVD VIDEO”, and  
“CD” logos are trademarks.  
• The N Mark is a trademark or registered  
trademark of NFC Forum, Inc. in the United  
States and in other countries.  
• “BRAVIA” is a trademark of Sony  
Corporation.  
• Android is a trademark of Google Inc.  
• The Bluetooth word mark and logos are  
®
• “AVCHD 3D/Progressive” and the  
“AVCHD 3D/Progressive” logo are  
trademarks of Panasonic Corporation and  
Sony Corporation.  
registered trademarks owned by Bluetooth  
SIG, Inc. and any use of such marks by Sony  
Corporation is under license. Other  
trademarks and trade names are those of their  
respective owners.  
• MPEG Layer-3 audio coding technology and  
patents licensed from Fraunhofer IIS and  
Thomson.  
• This product incorporates proprietary  
technology under license from Verance  
Corporation and is protected by U.S. Patent  
7,369,677 and other U.S. and worldwide  
patents issued and pending as well as  
copyright and trade secret protection for  
certain aspects of such technology. Cinavia  
is a trademark of Verance Corporation.  
Copyright 2004-2010 Verance Corporation.  
All rights reserved by Verance. Reverse  
engineering or disassembly is prohibited.  
, “XMB”, and “xross media bar” are  
trademarks of Sony Corporation and Sony  
Computer Entertainment Inc.  
• “PlayStation” is a registered trademark of  
Sony Computer Entertainment Inc.  
• “Sony Entertainment Network logo” and  
“Sony Entertainment Network” are  
trademarks of Sony Corporation.  
• Music and video recognition technology and  
®
related data are provided by Gracenote .  
Gracenote is the industry standard in music  
recognition technology and related content  
delivery. For more information, please visit  
CD, DVD, Blu-ray Disc, and music and  
video-related data from Gracenote, Inc.,  
copyright © 2000-present Gracenote.  
Gracenote Software, copyright © 2000-  
present Gracenote. One or more patents  
owned by Gracenote apply to this product  
and service. See the Gracenote website for a  
nonexhaustive list of applicable Gracenote  
patents. Gracenote, CDDB, MusicID,  
MediaVOCS, the Gracenote logo and  
logotype, and the “Powered by Gracenote”  
logo are either a registered trademark or a  
trademark of Gracenote, Inc. in the United  
States and/or other countries.  
5GB  
 
• Windows Media is either a registered  
trademark or trademark of Microsoft  
Corporation in the United States and/or other  
countries.  
End User License  
Information  
®
Gracenote End User License  
This product is protected by certain  
intellectual property rights of Microsoft  
Corporation. Use or distribution of such  
technology outside of this product is  
prohibited without a license from Microsoft  
or an authorized Microsoft subsidiary.  
Agreement  
This application or device contains software  
from Gracenote, Inc. of Emeryville, California  
(“Gracenote”). The software from Gracenote  
(the “Gracenote Software”) enables this  
application to perform disc and/or file  
identification and obtain music-related  
information, including name, artist, track, and  
title information (“Gracenote Data”) from  
online servers or embedded databases  
(collectively, “Gracenote Servers”) and to  
perform other functions. You may use  
Gracenote Data only by means of the intended  
End-User functions of this application or  
device.  
®
Content owners use Microsoft  
PlayReady™ content access technology to  
protect their intellectual property, including  
copyrighted content. This device uses  
PlayReady technology to access PlayReady-  
protected content and/or WMDRM-  
protected content. If the device fails to  
properly enforce restrictions on content  
usage, content owners may require  
Microsoft to revoke the device’s ability to  
consume PlayReady-protected content.  
Revocation should not affect unprotected  
content or content protected by other content  
access technologies. Content owners may  
require you to upgrade PlayReady to access  
their content. If you decline an upgrade, you  
will not be able to access content that  
requires the upgrade.  
You agree that you will use Gracenote Data,  
the Gracenote Software, and Gracenote  
Servers for your own personal non-  
commercial use only. You agree not to assign,  
copy, transfer or transmit the Gracenote  
Software or any Gracenote Data to any third  
party. YOU AGREE NOT TO USE OR  
EXPLOIT GRACENOTE DATA, THE  
GRACENOTE SOFTWARE, OR  
• DLNA™, the DLNA Logo and DLNA  
CERTIFIED™ are trademarks, service  
marks, or certification marks of the Digital  
Living Network Alliance.  
• Opera Devices SDK from Opera Software  
ASA. Copyright 1995-2013 Opera Software  
ASA. All rights reserved.  
GRACENOTE SERVERS, EXCEPT AS  
EXPRESSLY PERMITTED HEREIN.  
You agree that your non-exclusive license to  
use the Gracenote Data, the Gracenote  
Software, and Gracenote Servers will  
terminate if you violate these restrictions. If  
your license terminates, you agree to cease  
any and all use of the Gracenote Data, the  
Gracenote Software, and Gracenote Servers.  
Gracenote reserves all rights in Gracenote  
Data, the Gracenote Software, and the  
Gracenote Servers, including all ownership  
rights. Under no circumstances will Gracenote  
become liable for any payment to you for any  
information that you provide. You agree that  
Gracenote, Inc. may enforce its rights under  
this Agreement against you directly in its own  
name.  
®
• All other trademarks are trademarks of their  
respective owners.  
• Other system and product names are  
generally trademarks or registered  
trademarks of the manufacturers. ™ and ®  
marks are not indicated in this document.  
6GB  
 
The Gracenote service uses a unique identifier  
to track queries for statistical purposes. The  
purpose of a randomly assigned numeric  
identifier is to allow the Gracenote service to  
count queries without knowing anything about  
who you are. For more information, see the  
web page for the Gracenote Privacy Policy for  
the Gracenote service.  
The Gracenote Software and each item of  
Gracenote Data are licensed to you “AS IS.”  
Gracenote makes no representations or  
warranties, express or implied, regarding the  
accuracy of any Gracenote Data from in the  
Gracenote Servers. Gracenote reserves the  
right to delete data from the Gracenote Servers  
or to change data categories for any cause that  
Gracenote deems sufficient. No warranty is  
made that the Gracenote Software or  
Gracenote Servers are error-free or that  
functioning of Gracenote Software or  
Gracenote Servers will be uninterrupted.  
Gracenote is not obligated to provide you with  
new enhanced or additional data types or  
categories that Gracenote may provide in the  
future and is free to discontinue its services at  
any time.  
About These Operating  
Instructions  
• The instructions in these Operating  
Instructions describe the controls on the  
remote control. You can also use the controls  
on the unit if they have the same or similar  
names as those on the remote control.  
• In this manual, “disc” is used as a general  
reference for BDs, DVDs, or CDs unless  
otherwise specified by the text or  
illustrations.  
• Some illustrations are presented as  
conceptual drawings, and may be different  
from the actual products.  
• The items displayed on the TV screen may  
vary depending on the area.  
• The default setting is underlined.  
GRACENOTE DISCLAIMS ALL  
WARRANTIES EXPRESS OR IMPLIED,  
INCLUDING, BUT NOT LIMITED TO,  
IMPLIED WARRANTIES OF  
MERCHANTABILITY, FITNESS FOR A  
PARTICULAR PURPOSE, TITLE, AND  
NON-INFRINGEMENT. GRACENOTE  
DOES NOT WARRANT THE RESULTS  
THAT WILL BE OBTAINED BY YOUR  
USE OF THE GRACENOTE SOFTWARE  
OR ANY GRACENOTE SERVER. IN NO  
CASE WILL GRACENOTE BE LIABLE  
FOR ANY CONSEQUENTIAL OR  
INCIDENTAL DAMAGES OR FOR ANY  
LOST PROFITS OR LOST REVENUES.  
© Gracenote, Inc. 2009  
7GB  
 
 
Table of Contents  
About These Operating Instructions .... 7  
Unpacking ............................................ 9  
Guide to Parts and Controls ............... 10  
Tuner  
Receiving Radio Data System  
Getting Started  
Step 1: Installing the  
Speakers .............................. 14  
Step 2: Connecting the  
Using the Control for HDMI Function  
Deactivating the Buttons on the  
Controlling Your TV with the  
Saving Power in Standby Mode ......... 40  
System ................................. 15  
Connecting the speakers ....... 15  
Connecting the TV .................. 16  
Connecting the other  
equipment  
(Set-top box, etc.) ............... 16  
Connecting the antenna  
(aerial) ................................. 18  
Step 3: Preparing for Network  
Connection .......................... 18  
Step 4: Performing the Easy  
Setup .................................... 20  
Step 5: Selecting the Playback  
Source .................................. 21  
Step 6: Enjoying Surround  
Sound ................................... 21  
Using the Setup Display ..................... 43  
[Screen Settings] ................................ 44  
[Audio Settings] ................................. 45  
[BD/DVD Viewing Settings] ............. 46  
[Parental Control Settings] ................. 47  
[System Settings] ............................... 47  
[Network Settings] ............................. 48  
[Easy Network Settings] .................... 49  
[Resetting] .......................................... 49  
Playback  
Playing a Disc .................................... 23  
Playing from a USB Device ............... 25  
Enjoying music from a Bluetooth  
device .......................................... 25  
Connecting to a smartphone by  
Additional Information  
One-touch listening function  
Precautions ......................................... 50  
Notes about Discs ............................... 52  
Troubleshooting ................................. 53  
Playable Discs .................................... 58  
Playable Types of Files ...................... 59  
Supported Audio Formats .................. 60  
Specifications ..................................... 61  
Language Code List ........................... 63  
Index ................................................... 65  
(NFC) .......................................... 27  
Playing via a Network ........................ 29  
Available Options .............................. 32  
Sound Adjustment  
Selecting the Audio Format,  
Multilingual Tracks, or  
Channel ....................................... 34  
Enjoying Multiplex Broadcast  
Sound .......................................... 35  
8GB  
 
Unpacking  
• Quick Setup Guide  
• Reference Guide  
• Remote control (1)  
• R6 (size AA) batteries (2)  
• FM wire antenna (aerial) (1)  
• Front speakers (2)  
• Subwoofer (1)  
9GB  
 
 
Guide to Parts and Controls  
For more information, refer to the pages indicated in parentheses.  
Front panel  
A "/1 (on/standby)  
Note  
Turns on the unit, or sets it to standby  
mode.  
During the demonstration, the volume  
level may be higher than the volume level  
you have set.  
B Disc tray (page 23)  
E
F
(USB) port (page 25)  
(remote control sensor)  
C
(N-Mark) (page 28)  
Position the NFC-compatible device  
near this indication to activate the NFC  
function.  
G Front panel display  
H LED indicator  
D Play operation buttons  
White: Lights up when the unit is  
turned on.  
Blue (for Bluetooth status):  
– System is ready for pairing: Flashes  
quickly  
– During pairing: Flashes quickly  
– During connection: Flashes  
– Connection is established: Lights up  
Z (open/close)  
N
a) b) (play)  
x
b) (stop)  
VOL +/–a)  
./> (previous/next)  
FUNCTION (page 21)  
Selects the playback source.  
a)  
N and VOL + buttons have a tactile dot.  
Use the tactile dot as a reference when  
operating the unit.  
Hold down N on the unit for more than  
b)  
2 seconds, the built-in sound  
demonstration will be played back on the  
system. Press x to stop the demonstration.  
10GB  
 
   
Indicators in the front panel display  
A Lights up when stereo sound is  
F Displays the system’s status,  
received. (Radio only)  
such as radio frequency, etc.  
When you press DISPLAY, the stream  
information/decoding status is  
displayed when the function is set to  
“TV”.  
The stream information/decoding  
status may not appear depending on  
the stream or item being decoded.  
B Lights up when repeat play is  
activated.  
C Lights up when the system is  
playing via the PARTY  
STREAMING function.  
D Lights up when muting is on.  
E Lights up when the HDMI (OUT)  
jack is correctly connected to an  
HDCP (High-bandwidth Digital  
Content Protection) compliant  
equipment with HDMI or DVI  
Note  
When the [Main Unit illumination] is set to  
[Auto] in [System Settings], the front panel  
display lights off if you do not operate the unit for  
about 10 seconds.  
(Digital Visual Interface) input.  
Rear panel  
SPEAKERS  
SUBWOOFER  
FRONT  
R
FRONT  
L
A SPEAKERS jacks (page 15)  
D HDMI (OUT) jack (page 16)  
B TV (DIGITAL IN OPTICAL) jack  
E AUDIO IN (L/R) jacks (page 17)  
(page 16)  
F ANTENNA (FM) terminal  
C LAN (100) terminal (page 18)  
(page 18)  
11GB  
   
TV "/1 (on/standby) (page 40)  
Remote control  
Turns on the TV or sets it to standby  
mode.  
"/1 (on/standby) (pages 20, 36)  
Turns on the system or sets it to  
standby mode.  
B Number buttons (pages 36, 40)  
Enters the title/chapter numbers, preset  
station number, etc.  
AUDIO (page 34)  
Selects the audio format/track.  
SUBTITLE  
BD-ROM/DVD VIDEO.  
C Color buttons  
Short cut keys for selecting items on  
some BD menus (can also be used for  
Java interactive operations on BDs).  
D TOP MENU  
Opens or closes the BD’s or DVD’s  
Top Menu.  
POP UP/MENU  
Opens or closes the BD-ROM’s Pop-  
up Menu, or the DVD’s menu.  
Number 5, AUDIO, 2 +, and N buttons  
have a tactile dot. Use the tactile dot as a  
reference when operating the remote  
control.  
OPTIONS (pages 22, 32, 42)  
Displays the options menu on the TV  
screen or in the front panel display.  
(The location differs depending on the  
selected function.)  
: For TV operations  
(For details, see “Controlling Your TV  
with the Supplied Remote Control”  
(page 40).)  
RETURN  
Returns to the previous display.  
A Z (open/close)  
B/V/v/b  
Opens or closes the disc tray.  
Moves the highlight to a displayed  
item.  
SPEAKERS TVyAUDIO  
(enter)  
Enters the selected item.  
Selects whether TV sound is output  
from the system’s speakers or the TV’s  
speaker(s). This function works only  
when you set [Control for HDMI] to  
[On] (page 47).  
12GB  
 
 
E SOUND MODE +/– (page 21)  
Selects the sound mode.  
x (stop)  
Stops playback and remembers the  
stop point (resume point). The resume  
point for a title/track is the last point  
you played or the last photo for a photo  
folder.  
HOME (pages 20, 38, 43)  
Enters or exits the system’s home  
menu.  
MUSIC EQ  
Selects the pre-programmed equalizer  
when listening to music.  
Stops the built-in sound  
demonstration.  
Radio operation buttons  
See “Tuner” (page 35).  
PRESET +/–  
SEN  
Accesses the “Sony Entertainment  
Network™” online service.  
TUNING +/–  
F Playback operation buttons  
See “Playback” (page 23).  
G
(muting)  
./> (previous/next)  
Selects the previous/next chapter,  
track, or file.  
Turns off the sound temporarily.  
2 (volume) +/–  
Adjusts the volume.  
TV 2 (volume) +/–  
Adjusts the TV volume.  
TV t (TV input)  
Switches the TV’s input source  
between the TV and other input  
sources.  
m/M (fast/slow/freeze frame)  
Fast reverse/fast forward during  
playback. Each time you press the  
button, the search speed changes.  
Activates slow-motion play when  
pressed for more than one second in  
pause mode.  
H DISPLAY (pages 24, 29, 36, 41)  
Plays one frame at a time when pressed  
in pause mode.  
Displays playback and web browsing  
information on the TV screen.  
Displays the preset radio station,  
frequency, etc., in the front panel  
display.  
Note  
During Blu-ray 3D Disc playback, slow-  
motion reverse play and single-frame  
reverse play are not available.  
I FOOTBALL  
Produces optimized sound for  
watching football match broadcasting.  
N (play)  
Starts or re-starts playback (resume  
play).  
J BLUETOOTH  
Activates One-Touch Play (page 37)  
when the system is on and set to the  
“BD/DVD” function.  
Selects the “BT” function.  
When the blue LED indicator lights off  
during “BT” function, press to start  
pairing or connect to paired Bluetooth  
device.  
X (pause)  
Pauses or re-starts playback.  
FUNCTION (page 21)  
Selects the playback source.  
K SLEEP (page 39)  
Sets the sleep timer.  
13GB  
Installing the speakers  
on a wall  
Getting Started  
1
Prepare screws (not supplied)  
that are suitable for the hole on  
the back of each speaker. See  
the illustrations below.  
Step 1: Installing the  
Speakers  
Install the speakers by referring to the  
illustration below.  
4 mm  
A Front left speaker (L)  
B Front right speaker (R)  
C Subwoofer  
30 mm  
D TV  
5 mm  
A C  
D
B
Hole on the back of the speaker  
2
3
Fasten the screws to the wall.  
The screws should protrude  
5 mm to 7 mm.  
Since the system is equipped with S-Force  
PRO Front Surround* technology, you can  
enjoy surround sound with the speakers in  
front of the listening position.  
5 mm to  
7 mm  
*
S-Force PRO Front Surround 3D reproduces a  
convincing sense of distance and space,  
resulting in a true surround sound experience  
without the need for surround speakers.  
Hang the speaker on the screw.  
Note  
• Use caution when placing the speakers and/or  
speaker stands attached to the speakers on a  
specially treated (waxed, oiled, polished, etc.)  
floor, as staining or discoloration may result.  
• Do not lean or hang on a speaker, as it may fall  
down.  
14GB  
 
   
Note  
• Contact a screw shop or installer regarding the  
wall material or screws to be used.  
Step 2: Connecting the  
System  
Do not connect the AC power cord (mains  
lead) of the unit to a wall outlet (mains)  
until all the other connections are made.  
• Use screws that are suitable for the wall  
material and strength. As a plaster board wall is  
especially fragile, attach the screws securely to  
a beam and fasten them to the wall. Install the  
speakers on a vertical and flat wall where  
reinforcement is applied.  
• Sony is not responsible for accident or damage  
caused by improper installation, insufficient  
wall strength or improper screw installation,  
natural calamity, etc.  
Note  
When you connect other equipment with a  
volume control, turn down the volume of the  
equipment to a level where sound is not distorted.  
Connecting the  
speakers  
Connect the speaker cords to match the  
color of the SPEAKERS jacks of the unit.  
When connecting to the unit, insert the  
connector until it clicks.  
Red  
(Front right  
Purple  
(Subwoofer)  
speaker (R))  
SPEAKERS  
FRONT  
FRONT  
R
L
SUBWOOFER  
White  
(Front left  
speaker (L))  
15GB  
     
Connecting the TV  
Select one of the following connection methods according to the input jacks on your TV.  
SPEAKERS  
SUBWOOFER  
FRONT  
R
FRONT  
L
B
C
Video connection  
A
1)  
HDMI cable (not supplied)  
2)  
or  
1)  
2)  
High Speed HDMI cable  
If the HDMI IN jack of your TV is compatible with the ARC (Audio Return Channel) function, digital  
audio signal can be output from the TV via an HDMI cable connection. For setting the ARC function,  
see [Audio Return Channel] (page 48).  
Audio connections  
If you do not connect the system to the TV’s HDMI jack that is compatible with the ARC  
function, make an appropriate audio connection for listening to TV sound via the system’s  
speakers.  
B
High quality  
Optical digital cord (not supplied)  
Audio cable (not supplied)  
DIGITAL OUT  
OPTICAL  
C
L
AUDIO  
OUTPUT  
R
Standard  
quality  
16GB  
 
     
Connecting the other equipment (Set-top box, etc.)  
Connect the system so that video signals from the system and other equipment are output  
to the TV, and audio signals from the equipment are output to the system as follows.  
TV  
Video out  
Equipment  
®
(Set-top box, VCR, PlayStation , or  
digital satellite receiver, etc.)  
Audio out  
Signal flow  
System  
: Video signal  
: Audio signal  
Select one of the following connection methods according to the jack type of the equipment.  
SPEAKERS  
SUBWOOFER  
FRONT  
R
FRONT  
L
A
B
A
B
High quality  
Optical digital cord (not supplied)  
Audio cable (not supplied)  
DIGITAL OUT  
OPTICAL  
L
AUDIO  
OUTPUT  
R
Standard  
quality  
Note  
• If you make either connection above, set [Control for HDMI] in [HDMI Settings] of [System Settings]  
to [Off] (page 47).  
• You can enjoy equipment sound by selecting the “AUDIO” function for connection B.  
17GB  
   
Connecting the antenna  
(aerial)  
Step 3: Preparing for  
Network Connection  
Tip  
To connect the system to your network, perform  
[Easy Network Settings]. For details, see “Step 4:  
Performing the Easy Setup” (page 20).  
Select the method based on your LAN  
(Local Area Network) environment.  
• If you use a wireless LAN  
The system has built-in Wi-Fi, and you  
can connect the system to the network by  
making the network settings.  
• If you use other than a wireless LAN  
Use a LAN cable to connect to the LAN  
(100) terminal on the unit.  
FM wire antenna (aerial)  
(supplied)  
Note  
• Be sure to fully extend the FM wire antenna  
(aerial).  
• After connecting the FM wire antenna (aerial),  
keep it as horizontal as possible.  
Broadband router  
LAN cable (not supplied)  
Tip  
A shielded interface cable (LAN cable), straight  
or crossover, is recommended.  
18GB  
 
         
x No Security  
Before performing the  
network settings  
When your wireless LAN router (access  
point) is Wi-Fi Protected Setup (WPS)-  
compatible, you can easily set the network  
settings with the WPS button.  
If not, check the following information in  
advance, and record it in the space provided  
below.  
• The network name (SSID*) that  
identifies your network**.  
Although you can easily make settings,  
anyone can intercept wireless  
communication or intrude into your  
wireless network, even without any  
sophisticated tools. Keep in mind that there  
is a risk of unauthorized access or  
interception of data.  
x WEP  
WEP applies security to communications  
to prevent outsiders from intercepting  
communications or intruding into your  
wireless network. WEP is a legacy security  
technology that enables older devices  
which do not support TKIP/AES to be  
connected.  
• If security is set on your wireless  
network, the security key (WEP key,  
WPA key)**.  
*
SSID (Service Set Identifier) is a name that  
identifies a particular wireless network.  
x WPA-PSK (TKIP), WPA2-PSK  
(TKIP)  
TKIP is a security technology developed in  
response to the deficiencies of WEP. TKIP  
assures a higher security level than WEP.  
** You need to check the settings of your wireless  
LAN router to get the information about SSID  
and security key. For details:  
– visit the following website:  
– refer to the operating instructions supplied  
with the wireless LAN router  
x WPA-PSK (AES), WPA2-PSK  
(AES)  
AES is a security technology that uses an  
advanced security method distinct from  
WEP and TKIP. AES assures a higher  
security level than WEP or TKIP.  
– consult the manufacturer of the wireless  
LAN router  
About wireless LAN  
security  
Since communication via the wireless LAN  
function is established by radio waves, the  
wireless signal may be susceptible to  
interception. To protect wireless  
communication, this system supports  
various security functions. Be sure to  
correctly configure the security settings in  
accordance with your network  
environment.  
19GB  
 
5
Perform [Easy Initial Settings].  
Follow the on-screen  
instructions to make the basic  
Step 4: Performing the  
Easy Setup  
settings using B/V/v/b and  
.
Before performing Step 4  
Make sure all connections are secure, and  
then connect the AC power cord (mains  
lead).  
B/V/v/b  
Follow the Steps below to make the basic  
adjustments and network settings for the  
system.  
Displayed items vary depending on the  
area.  
6
7
After completing the [Easy Initial  
Settings], press V/v to select  
[Easy Network Settings], then  
press  
.
The [Easy Network Settings] display  
appears.  
1
Insert two R6 (size AA) batteries  
(supplied) by matching the 3  
and # ends on the batteries to  
the markings inside the  
Follow the on-screen  
instructions to make the network  
settings using B/V/v/b and  
.
compartment.  
If the system cannot connect to the  
network, see “Network connection”  
(page 57) or “Wireless LAN  
connection” (page 57).  
To recall the [Easy Network  
Settings] display  
2
3
4
Turn on the TV.  
1 Press HOME.  
The home menu appears on the TV  
screen.  
Press [/1.  
Switch the input selector on  
your TV so that the signal from  
the system appears on the TV  
screen.  
The [Easy Initial Settings] for OSD  
language selection appears.  
2 Press B/b to select  
3 Press V/v to select [Easy Network  
Settings], then press  
[Setup].  
.
20GB  
 
       
Step 5: Selecting the  
Playback Source  
Step 6: Enjoying  
Surround Sound  
After performing the previous Steps and  
starting playback, you can easily enjoy pre-  
to different kinds of sound sources. They  
bring the exciting and powerful sound of  
movie theaters into your home.  
Press FUNCTION repeatedly until  
the function you want appears in the  
front panel display.  
When you press FUNCTION once, the  
current function appears in the front panel  
display, then each time you press  
FUNCTION, the function changes  
cyclically as follows.  
Selecting the sound  
mode  
“BD/DVD” t “USB” t “FM” t  
“TV” t “BT” t “AUDIO”  
Press SOUND MODE +/– repeatedly  
during playback until the mode you  
want appears in the front panel  
display or on the TV screen.  
Function and playback source  
“BD/DVD”  
Disc or network device to be played by the  
system  
Auto  
“USB”  
The system automatically selects [Movie] or  
[Music] to produce the sound effect  
depending on the disc or sound stream.  
• 2-channel source: Outputs 2-channel sound  
as it is.  
• Multi-channel source: Simulates 7.1 or 5.1  
surround sound with two front speakers and  
a subwoofer.  
USB device that is connected to the (USB)  
port (page 10)  
“FM”  
FM radio (page 35)  
“TV”  
Equipment (TV, etc.) that is connected to the  
TV (DIGITAL IN OPTICAL) jack, or a TV  
compatible with the Audio Return Channel  
function that is connected to the HDMI  
(OUT) jack (page 16)  
Movie  
The system provides the optimized sound for  
watching movies.  
“BT”  
Music  
Audio contents of a Bluetooth device  
The system provides the optimized sound for  
listening to music.  
“AUDIO”  
Equipment that is connected to the AUDIO  
IN (L/R) jacks (page 17)  
Digital Music Enhancer  
[Digital Music]  
The system reproduces an enhanced sound  
for compressed audio.  
Tip  
Demo Sound  
• Some functions may be changed via the TV  
The system provides ear-catching sound,  
suitable for demonstration.  
screen by pressing FUNCTION, V/v, and  
• You can also press BLUETOOTH on the  
remote control to select “BT” function.  
.
21GB  
         
To select the sound mode  
from the option menu  
Selecting the football  
mode  
1 Press OPTIONS and V/v to select  
[Sound Mode], then press  
.
Press FOOTBALL during playback.  
[Football] appears on the TV screen.  
You can experience a feeling of presence in  
the stadium when watching a football  
match broadcasting.  
To turn off the football mode, press  
FOOTBALL again to select [Football Off].  
The sound mode is changed to the last  
selected sound mode.  
2 Press V/v to select the sound mode,  
then press  
.
To select the pre-  
programmed music  
equalizer  
Press MUSIC EQ repeatedly during  
playback.  
Note  
You can select the sound to suit your  
preference.  
Each time you press the button, the setting  
changes cyclically as follows.  
[Standard] t [Rock] t [Hiphop] t  
[Electronica]  
• Depending on the source, the football mode may  
not work well.  
• The football mode will be turned off when you  
turn off the system.  
Tip  
You can also select the football mode from the  
option menu.  
You can also select the music equalizer by  
using the option menu in [Music] sound  
mode.  
Note  
The sound mode can be selected only when  
[Sound Effect] is set to [Sound Mode On]  
(page 46). When [Sound Effect] is set to other  
than [Sound Mode On], the sound mode setting  
does not apply.  
22GB  
 
   
Enjoying BONUSVIEW/  
BD-LIVE  
Playback  
Some BD-ROMs with “BD-LIVE Logo*”  
have bonus content and other data that can  
be downloaded for enjoyment.  
Playing a Disc  
For playable discs, see “Playable Discs”  
(page 58).  
*
1
2
Connect the USB device to the  
(USB) port (page 25).  
For local storage, use a 1 GB or larger  
USB memory.  
1
Switch the input selector on  
your TV so that the signal from  
the system appears on your TV  
screen.  
Prepare for BD-LIVE (BD-LIVE  
only).  
2
Press Z, and place a disc on the  
disc tray.  
• Connect the system to a network  
(page 18).  
• Set [BD Internet Connection] to  
[Allow] (page 47).  
3
Insert a BD-ROM with  
BONUSVIEW/BD-LIVE.  
The operation method differs  
depending on the disc. Refer to the  
operating instructions of the disc.  
3
Press Z to close the disc tray.  
Playback starts.  
Tip  
To delete data in the USB memory, select [Delete  
BD Data] in [Video], and press . All data  
stored in the buda folder will be deleted.  
If playback does not start  
automatically, select  
[Video], [Music], or  
[Photo] category, and press  
in the  
.
23GB  
         
Enjoying Blu-ray 3D  
Displaying the playback  
information  
You can enjoy Blu-ray 3D Discs with the  
3D logo*.  
You can check the playback information,  
etc., by pressing DISPLAY.  
The displayed information differs  
depending on the disc type and system  
status.  
*
1
Prepare for Blu-ray 3D Disc  
playback.  
• Connect the system to your  
3D-compatible TV using a High  
Speed HDMI cable (page 16).  
• Set [3D Output Setting] and [TV  
Screen Size Setting for 3D] in  
[Screen Settings] (page 44).  
Example: when playing a BD-ROM  
2
Insert a Blu-ray 3D Disc.  
The operation method differs  
depending on the disc. Refer to the  
operating instructions supplied with  
the disc.  
Tip  
A Output resolution/Video frequency  
B Title number or name  
Refer also to the operating instructions of your  
3D-compatible TV.  
C The currently selected audio setting  
D Available functions (  
angle,  
audio,  
subtitle)  
E Playback information  
Displays play mode, playing status  
bar, disc type, video codec, bit rate,  
repeat type, elapsed time, total playing  
time  
F Chapter number  
G The currently selected angle  
24GB  
 
     
Playing from a USB  
Device  
Enjoying music from a  
Bluetooth device  
You can play video/music/photo files on a  
connected USB device.  
For playable types of files, see “Playable  
Types of Files” (page 59).  
About the Bluetooth  
wireless technology  
Bluetooth wireless technology is a short-  
range wireless technology that enables  
wireless data communication between  
digital devices. Bluetooth wireless  
technology operates within a range of about  
10 meters.  
1
Connect the USB device to the  
(USB) port.  
Refer to the operating instructions of  
the USB device before connecting.  
You do not need wires to get connected as  
you do with a USB connection, and you do  
not need to place the devices face to face as  
you do with wireless infrared technology.  
Bluetooth wireless technology is a global  
standard supported by thousands of  
companies. These companies produce  
products that meet the global standard.  
2
Press HOME.  
The home menu appears on the TV  
screen.  
3
4
Press B/b to select  
[Video],  
[Music], or  
[Photo].  
Press V/v to select  
device], then press  
[USB  
Supported Bluetooth  
version and profiles  
.
Note  
Profile refers to a standard set of  
capabilities for various Bluetooth product  
capabilities. This system supports the  
following Bluetooth version and profiles.  
Supported Bluetooth version:  
Bluetooth Specification version 3.0  
Supported Bluetooth profiles:  
A2DP 1.2 (Advanced Audio Distribution  
Profile)  
Do not remove the USB device during  
operation. To avoid data corruption or  
damage to the USB device, turn the system  
off before connecting or removing the USB  
device.  
AVRCP 1.3 (Audio Video Remote Control  
Profile)  
25GB  
         
Note  
5
Once pairing is completed, the  
device is automatically  
connected to the system.  
Device name appears on the TV  
screen.  
• To be able to use the Bluetooth function, the  
Bluetooth device to be connected must support  
the same profile as this system. Even if the  
device supports the same profile, the functions  
may differ depending on the specifications of  
the Bluetooth device.  
• The audio playback on this system may be  
delayed from that on the Bluetooth device  
because of the characteristics of the Bluetooth  
wireless technology.  
Note  
You can pair up to 9 Bluetooth devices. If  
the 10th Bluetooth device is paired, the least  
recently connected device will be replaced  
by the new one.  
6
7
Start playback on the Bluetooth  
device.  
Pairing this system with  
a Bluetooth device  
Adjust the volume.  
Pairing is an operation where Bluetooth  
devices register with each other  
beforehand. Once a pairing operation is  
performed, it does not need to be performed  
again.  
Adjust the volume of the Bluetooth  
device first, if the volume level is still  
unit.  
To cancel pairing operation  
Press HOME or FUNCTION.  
1
2
Place the Bluetooth device  
within 1 meter from the unit.  
Press BLUETOOTH.  
You can also select [Bluetooth  
Connecting to a  
Bluetooth device from  
this system  
AUDIO] from  
menu.  
[Input] in home  
You can connect to a Bluetooth device  
from this unit.  
Check the following before playing music:  
– The Bluetooth function of the Bluetooth  
device is turned on.  
3
4
Set the Bluetooth device in  
pairing mode.  
For details on setting the Bluetooth  
device in pairing mode, refer to the  
operating instructions supplied with  
the device.  
– The pairing has been completed  
(page 26).  
Select “BLU-RAY HOME  
THEATRE SYSTEM” on the  
Bluetooth device display.  
Perform this step within 5 minutes,  
otherwise pairing will be canceled.  
1
Press BLUETOOTH.  
Note  
To connect to the most recent connected  
Bluetooth device, press N. Then proceed to  
Step 5.  
Note  
If passkey is required on the Bluetooth  
device, enter “0000”. Passkey may be called  
“Passcode”, “PIN code”, “PIN number” or  
“Password”.  
2
Press OPTIONS.  
26GB  
 
   
3
4
Press V/v repeatedly to select  
[Device List], then press  
A list of paired Bluetooth devices  
Connecting to a  
smartphone by One-  
touchlisteningfunction  
(NFC)  
.
appears.  
Press V/v repeatedly to select  
the device you want, then press  
.
By holding an NFC-compatible  
5
6
Press N to start playback.  
smartphone near to the  
on the unit, the  
unit and smartphone proceed to complete  
pairing and the Bluetooth connection  
automatically.  
Adjust the volume.  
Adjust the volume of the Bluetooth  
device first, if the volume level is still  
too low, adjust the volume level on the  
unit.  
Compatible smartphones  
Smartphones with a built-in NFC function  
(OS: Android 2.3.3 – 4.0.x, excluding  
Android 3.x)  
Note  
Once the unit and the Bluetooth device are  
connected, you can control playback by pressing  
N, X, x, m/M and ./>.  
What is “NFC”?  
NFC (Near Field Communication) is a  
technology enabling short-range wireless  
communication between various devices,  
such as mobile phones and IC tags. Thanks  
to the NFC function, data communication  
can be achieved easily just by holding the  
To disconnect the  
Bluetooth device  
Press HOME, FUNCTION or RETURN.  
To delete a pairedBluetooth  
device from the device list  
device near the  
devices.  
on the NFC-compatible  
1 Follow Steps 1 to 3 above.  
2 Press V/v repeatedly to select the  
1
Download and install the app  
“NFC Easy Connect”.  
device, then press OPTIONS.  
“NFC Easy Connect” is a free app for  
Android smartphones that can be  
obtained on Google Play. Search for  
the app using the keyword “NFC Easy  
Connect” on the site, or access the  
download site directly by reading the  
two-dimensional code below.  
Note that “NFC Easy Connect” is free  
but data communication fees when  
downloading are charged separately.  
3 Press V/v repeatedly to select  
[Remove], then press  
.
4 Follow the on-screen instructions to  
delete the device using B/V/v/b and  
.
Note  
While connected to a Bluetooth device, this  
system cannot be detected and a connection  
cannot be established from another Bluetooth  
device.  
27GB  
   
Two-dimensional code* for  
direct access  
Note  
• The system only can recognizes and connects to  
one NFC-compatible device at a time.  
* Use a two-dimensional code reader app.  
• Depending on your smartphone, you may need  
to turn on the NFC function on your smartphone  
in advance. For details, refer to the operating  
instructions of the smartphone.  
Tip  
If pairing and the Bluetooth connection fail, do  
the following.  
Note  
– Relaunch “NFC Easy Connect” and move the  
smartphone slowly over the  
– Remove the case from the smartphone if using  
a commercially available smartphone case.  
.
The app may not be available in some  
countries/regions.  
2
3
Start the “NFC Easy Connect”  
app on the smartphone.  
Make sure that the application screen  
is displayed.  
To listen to music  
Start playback of an audio source on the  
smartphone. For details on playback  
operations, refer to the operating  
instructions of your smartphone.  
Hold the smartphone near to the  
on the unit until the  
smartphone vibrates.  
Tip  
If the volume level is low, adjust the volume of  
the smartphone first. If the volume level is still  
too low, adjust the volume level on the unit.  
To stop playback  
The playback will be stopped when you  
Vibration cue is provided when the  
smartphone is recognized by the unit.  
After being recognized by the unit,  
follow the on-screen instructions  
displayed on the smartphone, and  
complete the procedure for Bluetooth  
connection.  
When the Bluetooth connection is  
established, the blue LED indicator on  
the front panel stops flashing. The  
playback time appears in the front  
panel display.  
perform any of the following items:  
– Hold the smartphone near to the  
the unit again.  
– Stop the music player of the smartphone.  
– Turn off the unit or the smartphone.  
– Change the function.  
– Disable the Bluetooth function on the  
smartphone.  
on  
28GB  
 
 
Video streaming control  
panel  
The control panel appears when a video file  
starts playing. The displayed items may  
differ depending on the Internet content  
provider.  
Playing via a Network  
Enjoying Sony  
Entertainment Network  
(SEN)  
To display again, press DISPLAY.  
Sony Entertainment Network serves as a  
gateway delivering selected Internet  
content and a variety of on-demand  
entertainment straight to your unit.  
Tip  
A Control display  
• Some Internet content requires registration via a  
PC before it can be played. For further details,  
visit the following website:  
Press B/V/v/b or  
operations.  
for playback  
• Some Internet content may not be available in  
some countries/regions.  
B Playing status bar  
Status bar, cursor indicating the  
current position, playing time, duration  
of the video file  
1
Prepare for Sony Entertainment  
Network.  
C Network condition indicator  
Indicates signal strength for a  
wireless connection.  
Connect the system to a network  
(page 18).  
Indicates a wired connection.  
2
3
Press SEN.  
D Network transmission speed  
E The next video file name  
Press B/V/v/b to select the  
Internet content and a variety of  
on-demand entertainment, then  
F The currently selected video file name  
press  
.
29GB  
     
To play files stored on a  
DLNA server via the system  
(DLNA Player)  
Playing files on a Home  
Network (DLNA)  
Select the DLNA server icon from  
You can play video/music/photo files on  
other DLNA-certified equipment by  
connecting them to your home network.  
[Video],  
[Music], or  
[Photo] in  
the home menu, then select the file that you  
want to play.  
This unit can be used as a player and  
renderer.  
Server  
• Server: Stores and shares digital media  
contents  
• Player: Finds and plays digital media  
content from the DMS  
Player  
(This system)  
• Renderer: Receives and plays files from  
the server, and can be operated by another  
equipment (controller)  
• Controller: Operates the renderer  
equipment  
To play remote files by  
(Renderer) via a DLNA  
controller  
Server  
You can operate the system with a  
DLNA-certified controller (a mobile  
phone, etc), when playing files stored on a  
DLNA server.  
Server  
Player  
(This system)  
Renderer  
(This system)  
Player  
Prepare for using the DLNA  
function.  
Controller  
• Connect the system to a network  
(page 18).  
• Prepare other DLNA-certified  
equipment. For details, refer to the  
operating instructions of the equipment.  
For details on operation, refer to the  
operating instructions of the DLNA  
controller.  
Note  
Do not operate the system with the supplied  
remote control and a DLNA controller at the same  
time.  
Tip  
The system is compatible with the “Play To”  
®
function of Windows Media Player 12 that  
comes standard with Windows 7.  
30GB  
 
 
To use the system as the  
PARTY host  
Playing the same music  
in different rooms  
(PARTY STREAMING)  
Select a track in  
[Music], a radio station  
in [Radio],  
[AUDIO] or  
[Bluetooth AUDIO] in  
[Input],  
You can play the same music at the same  
time on all Sony equipment which are  
compatible with the PARTY  
STREAMING function and connected to  
your home network.  
press OPTIONS. Then select [Start  
PARTY] to start.  
To close, press OPTIONS, then select  
[Close PARTY].  
Note  
Contents in  
[Music] and the “FM”,  
If content that is not compatible with the PARTY  
STREAMING function is played, the system  
closes PARTY automatically.  
“BT” and “AUDIO” functions can be used  
with the PARTY STREAMING function.  
There are two kinds of PARTY  
STREAMING-compatible equipment.  
• PARTY host: Plays and sends music.  
• PARTY guest: Plays music that is  
received from PARTY host.  
To use the system as a  
PARTY guest  
Select  
[PARTY] in  
[Music], then  
select the PARTY host device icon.  
To leave the PARTY, press OPTIONS,  
then select [Leave PARTY].  
This unit can be used as a PARTY host or  
PARTY guest.  
To close the PARTY, press OPTIONS,  
then select [Close PARTY].  
PARTY host  
(This system)  
Note  
The sale and product lineup of products that are  
compatible with the PARTY STREAMING  
function differ depending on the area.  
PARTY guest  
Searching for video/  
music information  
PARTY guest  
You can acquire content information using  
Gracenote technology and search for  
related information.  
Prepare for PARTY STREAMING.  
• Connect the system to a network  
(page 18).  
1
2
Connect the system to a network  
(page 18).  
• Connect equipment which is compatible  
with the PARTY STREAMING function.  
Insert a disc with content about  
which you want to search.  
You can perform a video search from a  
BD-ROM or DVD-ROM, and a music  
search from a CD-DA (music CD).  
31GB  
3
4
Press B/bto select  
[Video] or  
[Video  
Available Options  
Various settings and playback operations  
are available by pressing OPTIONS. The  
available items differ depending on the  
situation.  
[Music].  
Press V/v to select  
Search] or  
[Music Search].  
The content information (such as title,  
cast, track, or artist), [Playback  
History] and [Search History] are  
displayed.  
Common options  
• [Playback History]  
[Sound Mode]  
Changes the sound mode setting (page 21).  
Displays a list of previously played  
BD-ROM/DVD-ROM/CD-DA  
(music CD) titles. Select a title to  
acquire content information.  
• [Search History]  
Displays a list of previous searches  
performed via the [Video Search] or  
[Music Search] function.  
[Football]  
Turns on or off the football mode (page 22).  
[Repeat Setting]  
Sets repeat playback.  
[3D Menu]  
[Simulated 3D]: Adjusts the simulated 3D  
effect.  
[3D Depth Adjustment]: Adjusts the depth of  
3D images.  
[2D Playback]: Sets playback to 2D image.  
To search for further related  
information  
Select an item in the lists, then select the  
[Play/Stop]  
Starts or stops playback.  
service for searches.  
[Play from start]  
Plays the item from the beginning.  
Using the TV SideView  
[Start PARTY]  
TV SideView is a free mobile application  
for the remote device (smartphone, etc). By  
using the TV SideView with this system,  
you can easily enjoy the system by the  
operation on your remote device.  
You can launch a service or application  
directly from the remote device and view  
the disc information during the disc  
playback. The TV SideView also can be  
used as a remote control and software  
keyboard.  
Starts a party with the selected source.  
This item may not appear depending on the  
source.  
[Leave PARTY]  
Leaves a party which the system is  
participating in. The PARTY STREAMING  
function continues among other participating  
equipment.  
[Close PARTY]  
For PARTY host: Closes a party.  
For PARTY guest: Closes a party which the  
system is participating in. The PARTY  
STREAMING function ends for all other  
participating equipment.  
Before you use the TV SideView device  
with this system for the first time, be sure to  
register the TV SideView device.  
[Change Category]  
Switches among the  
and [Photo] category in “BD/DVD” (for  
disc only) or “USB” function. This item only  
available when the display list is available  
for the category.  
Follow the on-screen instructions on the  
TV SideView device for registration.  
[Video], [Music]  
Note  
The registration will be possible only when home  
menu appears on the TV screen.  
32GB  
 
   
[Video] only  
[Music] only  
[A/V SYNC]  
[Add Slideshow BGM]  
Adjusts the time gap between picture and  
Registers music files in the USB memory as  
sound (page 34).  
slideshow background music (BGM).  
[3D Output Setting]  
[Music Search]  
Sets whether or not to output 3D video  
Displays information on the audio CD  
automatically.  
(CD-DA) based on Gracenote technology.  
[Video Settings]  
• [Picture Quality Mode]: Selects the picture  
settings for different lighting environments.  
• [BNR]: Reduces the mosaic-like block  
noise in the picture.  
• [MNR]: Reduces minor noise around the  
picture outlines (mosquito noise).  
[Photo] only  
[Slideshow]  
Starts a slideshow.  
[Slideshow Speed]  
Changes the slideshow speed.  
[Pause]  
[Slideshow Effect]  
Pauses playback.  
Sets the effect when playing a slideshow.  
[Top Menu]  
[Slideshow BGM]  
Displays the BD’s or DVD’s Top Menu.  
• [Off]: Turns off the function.  
• [My Music from USB]: Sets the music files  
registered in [Add Slideshow BGM].  
• [Play from Music CD]: Sets the tracks on  
CD-DAs (music CDs).  
[Menu/Popup Menu]  
Displays the BD-ROM’s Pop-up Menu or  
DVD’s menu.  
[Title Search]  
Searches for a title on BD-ROMs/DVD  
VIDEOs and starts playback from the  
beginning.  
[Change Display]  
Switches between [Grid View] and [List  
View].  
[Chapter Search]  
Searches for a chapter and starts playback  
from the beginning.  
[Rotate Left]  
Rotates the photo counterclockwise by  
90 degrees.  
[Audio]  
Selects the audio format/track.  
[Rotate Right]  
Rotates the photo clockwise by 90 degrees.  
[Subtitle]  
[View Image]  
Displays the selected picture.  
Selects the subtitle language when  
multilingual subtitles are recorded on  
BD-ROMs/DVD VIDEOs.  
[Angle]  
Switches the viewing angles when multi-  
angles are recorded on BD-ROMs/DVD  
VIDEOs.  
[IP Content Noise Reduction]  
Adjusts the video quality for Internet  
content.  
[Video Search]  
Displays information on the BD-ROM/  
DVD-ROM based on Gracenote technology.  
33GB  
   
Adjusting the delay  
betweenthepictureand  
sound  
Sound Adjustment  
Selecting the Audio  
Format, Multilingual  
Tracks, or Channel  
When the system is playing a BD/DVD  
VIDEO recorded in multiple audio formats  
(PCM, Dolby Digital, MPEG audio, or  
DTS) or multilingual tracks, you can  
change the audio format or language.  
With a CD, you can select the sound from  
the right or left channel and listen to the  
sound of the selected channel through both  
the right and left speakers.  
(A/V SYNC)  
When the sound does not match the  
pictures on the TV screen, you can adjust  
the delay between the picture and sound for  
each function separately.  
The setting method differs depending on  
the function.  
When other than the “BT” or  
“TV” function is selected  
1
Press OPTIONS.  
The option menu appears on the TV  
screen.  
Press AUDIO repeatedly during  
playback to select the audio signal  
you want.  
The audio information appears on the TV  
screen.  
2
3
Press V/v to select [A/V SYNC],  
then press  
Press B/b to adjust the delay,  
then press  
.
.
You can adjust from 0 ms to 300 ms in  
25 ms increments.  
x BD/DVD VIDEO  
Depending on the BD/DVD VIDEO, the  
When the “TV” function is  
selected  
option of language varies.  
When 4 digits are displayed, they represent  
a language code. See “Language Code  
List” (page 63). When the same language is  
displayed two or more times, the BD/DVD  
VIDEO is recorded in multiple audio  
formats.  
1
Press OPTIONS.  
“AV.SYNC” appears in the front panel  
display.  
2
3
Press  
Press V/v to adjust the delay,  
then press  
or b.  
x DVD-VR  
The types of sound tracks recorded on a  
disc are displayed.  
Example:  
.
You can adjust from 0 ms to 300 ms in  
25 ms increments.  
• [ Stereo]  
• [ Stereo (Audio1)]  
• [ Stereo (Audio2)]  
• [ Main]  
4
Press OPTIONS.  
The option menu in the front panel  
display turns off.  
• [ Sub]  
• [ Main/Sub]  
34GB  
 
           
Note  
[
Stereo (Audio1)] and [ Stereo (Audio2)] do  
Tuner  
not appear if only one audio stream is recorded on  
the disc.  
Listening to the Radio  
x CD  
• [ Stereo]: The standard stereo sound.  
• [ 1/L]: The sound of the left channel  
(monaural).  
• [ 2/R]: The sound of the right channel  
(monaural).  
• [ L+R]: The sound of both the left and  
right channels output from each  
individual speaker.  
1
Press FUNCTION repeatedly  
until “FM” appears in the front  
panel display.  
2
Select the radio station.  
Automatic tuning  
Hold down TUNING +/– until the auto  
scanning starts.  
[Auto Tuning] appears on the TV  
screen. Scanning stops when the  
system tunes in a station.  
To cancel automatic tuning, press any  
buttons.  
Enjoying Multiplex  
Broadcast Sound  
(DUAL MONO)  
Manual tuning  
Press TUNING +/– repeatedly.  
You can enjoy multiplex broadcast sound  
when the system receives or plays a Dolby  
Digital multiplex broadcast signal.  
3
Press 2 +/– repeatedly to  
adjust the volume.  
Note  
To receive a Dolby Digital signal, you need to  
connect a TV or other equipment to the TV  
(DIGITAL IN OPTICAL) jack with a optical  
digital cord (pages 16, 17).  
If your TV’s HDMI IN jack is compatible with  
the Audio Return Channel function (pages 16,  
47), you can receive a Dolby Digital signal via an  
HDMI cable.  
If an FM program is noisy  
If an FM program is noisy, you can select  
monaural reception. There will be no stereo  
effect, but reception will improve.  
1
Press OPTIONS.  
The option menu appears on the TV  
screen.  
Press AUDIO repeatedly until the  
signal you want appears in the front  
panel display.  
• “MAIN”: Sound of the main language  
will be output.  
• “SUB”: Sound of the sub language will  
be output.  
• “MN/SUB”: Mixed sound of both the  
main and sub languages will be output.  
2
3
Press V/v to select [FM Mode],  
then press  
Press V/v to select [Monaural],  
then press  
.
.
• [Stereo]: Stereo reception.  
• [Monaural]: Monaural reception.  
Tip  
You can set [FM Mode] for each preset station  
separately.  
35GB  
             
To turn off the radio  
Press "/1.  
Selecting a preset  
station  
1
Press FUNCTION repeatedly  
until “FM” appears in the front  
panel display.  
Presetting radio  
stations  
The last received station is tuned in.  
You can preset up to 20 stations. Before  
tuning, make sure to turn down the volume  
to minimum.  
2
Press PRESET +/– repeatedly to  
select the preset station.  
The preset number and frequency  
appear on the TV screen and front  
panel display.  
Each time you press the button, the  
system tunes in one preset station.  
1
2
Press FUNCTION repeatedly  
until “FM” appears in the front  
panel display.  
Hold down TUNING +/– until the  
auto scanning starts.  
Tip  
Scanning stops when the system tunes  
in a station.  
• You can select the preset station number  
directly by pressing the number buttons.  
• Each time you press DISPLAY, the  
display in the front panel display changes  
as follows:  
3
Press OPTIONS.  
The option menu appears on the TV  
screen.  
Frequency y Preset number  
4
5
6
Press V/v to select [Preset  
Memory], then press  
.
Press V/v to select the preset  
number you want, then press  
.
Repeat Steps 2 to 5 to store  
other stations.  
To change a preset number  
Select the preset number you want by  
pressing PRESET +/–, then perform the  
procedure from Step 3.  
36GB  
 
     
Receiving Radio Data  
System (RDS)  
The Radio Data System (RDS) is a  
broadcasting service that allows radio  
stations to send additional information  
along with the regular program signal. This  
system offers convenient RDS features,  
such as station name display.  
Other Operations  
Using the Control for  
HDMI Function for  
“BRAVIA” Sync  
This function is available on TVs with the  
“BRAVIA” Sync function.  
By connecting Sony equipment that is  
compatible with the Control for HDMI  
function via an HDMI cable, operation is  
simplified.  
The station name appears on the TV screen.  
Simply select a station from the FM  
band.  
Note  
Note  
• RDS may not work properly if the station you  
are tuned to is not transmitting the RDS signal  
properly, or if the signal strength is weak.  
• Not all FM stations provide RDS service, nor do  
they provide the same type of services. If you  
are not familiar with the RDS system, check  
with your local radio stations for details on RDS  
services in your area.  
To use the “BRAVIA” Sync function, be sure to  
turn on the system and all connected equipment  
after completed the HDMI connection.  
Control for HDMI - Easy  
Setting  
You can set the system’s [Control for  
HDMI] function automatically by enabling  
the corresponding setting on the TV.  
For details about the Control for HDMI  
function, see “[HDMI Settings]” (page 47)  
System Power Off  
You can turn the system off in sync with the  
TV.  
Note  
The system does not turn off automatically while  
playing music or when “FM” function is selected.  
One-Touch Play  
When you press N on the remote control,  
the system and TV turn on, and the TV’s  
input is switched to the HDMI input which  
the system is connected.  
37GB  
           
System Audio Control  
You can enjoy the sound from TV or other  
equipment by a simple operation.  
Setting the Speakers  
[Speaker Settings]  
You can use the System Audio Control  
function as follows:  
speakers’ distance from your listening  
position. Then use the test tone to adjust the  
balance of the speakers.  
• When the system is turned on, the sound  
of the TV or other equipment can be  
output from the speakers of the system.  
• When sound from the TV or other  
equipment is output via the speakers of  
the system, you can switch the sound to  
output from the TV speakers by pressing  
SPEAKERS TVyAUDIO.  
• When sound from the TV or other  
equipment is output via the speakers of  
the system, you can adjust the volume  
and turn off the sound of the system by  
operating the TV.  
1
Press HOME.  
The home menu appears on the TV  
screen.  
2
3
Press B/b to select  
Press V/v to select [Audio  
Settings], then press  
Press V/v to select [Speaker  
Settings], then press  
[Setup].  
.
4
.
Audio Return Channel  
The [Speaker Settings] display  
appears.  
You can enjoy TV sound via the system by  
using just one HDMI cable. For details of  
the setting, see “[Audio Return Channel]”  
(page 48).  
5
6
7
Press V/v to select the item, then  
press  
.
Press V/v to adjust the  
parameter.  
Language Follow  
When you change the language for the  
on-screen display of the TV, the system’s  
on-screen display language is also changed  
after turning off and on the system.  
Press B/b and  
setting.  
to confirm the  
Check the following settings.  
x [Distance]  
Be sure to set the parameters of the distance  
from the listening position to the speakers.  
You can set the parameters from 0.0 to  
7.0 meters.  
[Front Left/Right] 3.0 m: Set the front  
speaker distance.  
[Subwoofer] 3.0 m: Set the subwoofer  
distance.  
38GB  
 
         
Note  
x [Level]  
The test tone signals are not output from the  
HDMI (OUT) jack.  
You can adjust the sound level of the  
speakers. You can set the parameters from  
–6.0 dB to +6.0 dB. Be sure to set [Test  
Tone] to [On] for easy adjustment.  
Tip  
To adjust the volume of all the speakers at one  
time, press 2 +/–.  
[Front Left/Right] 0.0 dB: Set the front  
speaker level.  
[Subwoofer] 0.0 dB: Set the subwoofer  
level.  
Using the Sleep Timer  
You can set the system to turn off at a  
preset time, so you can fall asleep listening  
to music. The time can be preset in intervals  
of 10 minutes.  
x [Test Tone]  
The speakers will emit a test tone to adjust  
[Level].  
[Off]: The test tone is not emitted from the  
speakers.  
[On]: The test tone is emitted from each  
speaker in sequence while adjusting level.  
When you select one of the [Speaker  
Settings] items, the test tone is emitted  
from each speaker in sequence.  
Adjust the sound level as follows.  
Press SLEEP.  
Each time you press SLEEP, the minutes  
display (the remaining time) in the front  
panel display changes by 10 minutes.  
When you set the sleep timer, the  
remaining time appears every 5 minutes.  
When the remaining time is less than  
2 minutes, “SLEEP” flashes in the front  
panel display.  
1 Set [Test Tone] to [On].  
2 Press V/v to select [Level], then  
press  
.
3 Press V/v to select the speaker type  
you want, then press  
To check the remaining  
time  
.
Press SLEEP once.  
4 Press B/b to select the left or right  
speaker, then press V/v to adjust the  
level.  
To change the remaining  
time  
Press SLEEP repeatedly.  
5 Press  
.
6 Repeat Steps 3 to 5.  
7 Press RETURN.  
The system returns to the previous  
display.  
8 Press V/v to select [Test Tone], then  
press  
.
9 Press V/v to select [Off], then press  
.
39GB  
       
Preparing the remote  
control for controlling  
the TV  
Deactivating the  
Buttons on the Unit  
(Child Lock)  
You can deactivate the buttons on the unit  
(except for "/1) for preventing  
While holding down TV "/1, press  
number buttons to enter your TV’s  
manufacturer’s code (see the table).  
Then release TV "/1.  
misoperation, such as child mischief.  
Manufacturer  
SONY  
Code number  
Hold down x on the unit for more  
than 5 seconds.  
01 (default)  
05  
“LOCKED” appears in the front panel  
display.  
The child lock function is activated and the  
buttons on the unit are locked. (You can  
operate the system by using the remote  
control.)  
LG  
PANASONIC  
PHILIPS  
06  
02, 03, 07  
02, 08  
04  
SAMSUNG  
TOSHIBA  
To cancel, hold down x for more than  
5 seconds until “UNLOCK” appears in the  
front panel display.  
If the setting is unsuccessful, the currently  
registered code is not changed. Re-enter the  
code number.  
Note  
If more than one code number is listed, try  
entering them one at a time until you find  
the code that works with your TV.  
If you operate the buttons on the unit while the  
child lock function is on, “LOCKED” flashes in  
the front panel display.  
Saving Power in  
Standby Mode  
Check that you have made the following  
settings:  
– [Control for HDMI] in [HDMI Settings]  
is set to [Off] (page 47).  
– [Quick Start Mode] is set to [Off]  
(page 48).  
Controlling Your TV  
with the Supplied  
Remote Control  
By adjusting the remote control signal, you  
can control your TV with the supplied  
remote control.  
Note  
– [Remote Start] in [Network Settings] is  
set to [Off] (page 49).  
When you replace the batteries of the remote  
control, the code number may reset to the default  
(SONY) setting. Set the appropriate code number  
again.  
40GB  
 
               
Internet Browser  
display  
Browsing Websites  
1
Prepare for Internet browsing.  
Connect the system to a network  
(page 18).  
You can check website information by  
pressing DISPLAY. The display  
information differs depending on the  
website and page status.  
2
Press HOME.  
The home menu appears on the TV  
screen.  
3
4
Press B/b to select  
[Network].  
Press V/v to select [Internet  
Browser], then press  
.
The [Internet Browser] display  
appears.  
A Page title  
Note  
B Page address  
Some websites may not display correctly, or not  
function.  
C Cursor  
Move by pressing B/V/v/b. Place the  
cursor on the link you want to view,  
then press . The linked website is  
displayed.  
To enter a URL  
Select [URL entry] from the options menu.  
Enter the URL using the software  
keyboard, then select [Enter].  
D SSL icon  
To set the default start page  
While the page you want to set is displayed,  
select [Set as start page] from the options  
menu.  
Appears when the linked URL is  
secured.  
E Signal strength indicator  
Appears when the system is connected  
to a wireless network.  
To return to the previous  
page  
Select [Previous page] from the options  
F Progress bar/Loading icon  
Appears when the page is being read,  
or during file download/transfer.  
menu.  
When the previous page does not appear  
even if you select [Previous page], select  
[Window List] from the options menu and  
select the page you want to return to from  
the list.  
G Text input field  
Press , then choose [Input] from the  
options menu to open the software  
keyboard.  
H Scroll bar  
Press B/V/v/b to move the page  
display left, up, down, or right.  
To quit Internet Browser  
Press HOME.  
41GB  
   
[Display certificate]  
Displays server certificates sent from pages  
that support SSL.  
Available options  
Various settings and operations are  
available by pressing OPTIONS.  
The available items differ depending on the  
situation.  
[Input]  
Displays the software keyboard to enter  
characters while browsing a website.  
[Break]  
Moves the cursor to the next line in the text  
input field.  
[Browser Setup]  
Displays the Internet Browser settings.  
• [Zoom]: Increases or decreases the size of  
the displayed contents.  
• [JavaScript Setup]: Sets whether to enable  
or disable JavaScript.  
[Delete]  
Erases one character on the left side of the  
cursor during text input.  
• [Cookie Setup]: Sets whether or not to  
accept browser cookies.  
• [SSL Alarm Display]: Sets whether to  
enable or disable SSL.  
[Window List]  
Displays a list of all current opened websites.  
Allows you to return to a previous displayed  
website by selecting the window.  
[Bookmark List]  
Displays the bookmark list.  
[URL entry]  
Allows you to enter a URL when the  
software keyboard is displayed.  
[Previous page]  
Moves to a previous displayed page.  
[Next page]  
Moves to the previous displayed next page.  
[Cancel loading]  
Stops loading a page.  
[Reload]  
Reloads the same page.  
[Add to Bookmark]  
Adds the current displayed website to the  
bookmark list.  
[Set as start page]  
Sets the current displayed website as the  
default start page.  
[Open in new window]  
Opens a link in a new window.  
[Character encoding]  
Sets the character encoding system.  
42GB  
 
 
Icon  
Explanation  
[System Settings]  
(page 47)  
Makes the system-related  
settings.  
Settings and Adjustments  
Using the Setup Display  
You can make various adjustments to items  
such as picture and sound.  
[Network Settings]  
(page 48)  
Makes detailed settings for  
Internet and network.  
The default settings are underlined.  
[Easy Network Settings]  
(page 49)  
Note  
Settings] to make the basic  
network settings.  
Playback settings stored in the disc take priority  
over the Setup Display settings. Therefore, some  
of the functions may not be performed.  
[Resetting] (page 49)  
factory settings.  
1
Press HOME.  
The home menu appears on the TV  
screen.  
2
3
Press B/b to select  
[Setup].  
By updating your software to the latest  
For information about update functions,  
refer to the following website:  
Press V/v to select the setup  
category icon, then press  
.
Icon  
Explanation  
[Network Update]  
(page 43)  
Updates the software of the  
system.  
[Screen Settings]  
(page 44)  
Makes the screen settings  
During a software update, “UPDATE”  
appears in the front panel display. After the  
update completes, the unit automatically  
turns off.  
While the updating operation is in progress,  
do not turn on or off the unit, or operate the  
unit or TV. Wait for the software update to  
complete.  
according to the type of TV.  
[Audio Settings]  
(page 45)  
Makes the audio settings  
according to the type of  
connecting jacks.  
[BD/DVD Viewing  
Settings] (page 46)  
Makes detailed settings for  
BD/DVD playback.  
[Parental Control  
Settings] (page 47)  
Makes detailed settings for  
the Parental Control  
function.  
43GB  
           
x [DVD Aspect Ratio]  
[Letter Box]: Displays a wide picture with  
black bands on the top and bottom.  
[Screen Settings]  
a
x [3D Output Setting]  
[Auto]: Normally select this.  
[Off]: Select this to display all contents in  
2D.  
[Pan & Scan]: Displays a full-height  
picture on the entire screen, with trimmed  
sides.  
x [TV Screen Size Setting for 3D]  
Sets the screen size of your 3D-compatible  
TV.  
x [TV Type]  
[16:9]: Select this when connecting to a  
wide-screen TV or a TV with a wide-mode  
function.  
[4:3]: Select this when connecting to a 4:3  
screen TV without a wide-mode function.  
x [Cinema Conversion Mode]  
[Auto]: Normally select this. The unit  
automatically detects whether the material  
is video-based or film-based, and switches  
to the appropriate conversion method.  
[Video]: The conversion method suited for  
video-based material will always be  
selected regardless of the material.  
x [Screen Format]  
[Full]: Select this when connecting to a TV  
with a wide-mode function. Displays a 4:3  
screen picture in 16:9 aspect ratio even on  
a wide-screen TV.  
[Normal]: Changes the picture size to fit  
the screen size with the original picture  
aspect ratio.  
x [Output Video Resolution]  
[Auto]: Outputs video signal according to  
the resolution of the TV or connected  
equipment.  
[Original Resolution]: Outputs video signal  
according to the resolution recorded on the  
disc. (When the resolution is lower than SD  
resolution, it is scaled up to SD resolution.)  
[480i/576i]*, [480p/576p]*, [720p],  
[1080i], [1080p]: Outputs video signal  
according to the selected resolution setting.  
* If the color system of your disc is NTSC, the  
video signals resolution can be converted to  
[480i] and [480p] only.  
44GB  
 
                   
x [BD-ROM 24p Output]  
x [Pause Mode] (BD/DVD VIDEO/  
DVD-R/DVD-RW only)  
[Auto]: The picture, including subjects that  
move dynamically, is output with no jitter.  
Normally select this position.  
[Frame]: The picture, including subjects  
that do not move dynamically, is output in  
high resolution.  
[Auto]: Outputs 24p video signals only  
when you connect a 1080/24p-compatible  
TV via an HDMI connection and the  
[Output Video Resolution] is set to [Auto]  
or [1080p].  
[On]: Select this when your TV is  
compatible with 1080/24p video signals.  
[Off]: Select this when your TV is not  
compatible with 1080/24p video signals.  
[Audio Settings]  
x [DVD-ROM 24p Output]  
[Auto]: Outputs 24p video signals only  
when you connect a 1080/24p-compatible  
TV via an HDMI connection and the  
[Output Video Resolution] is set to [Auto]  
or [1080p].  
x [BD Audio MIX Setting]  
[On]: Outputs the audio obtained by mixing  
the interactive audio and secondary audio  
to the primary audio.  
[Off]: Select this when your TV is not  
compatible with 1080/24p video signals.  
[Off]: Outputs the primary audio only.  
x [Audio DRC]  
You can compress the dynamic range of the  
sound track.  
x [YCbCr/RGB (HDMI)]  
[Auto]: Automatically detects the type of  
external equipment, and switches to the  
matching color setting.  
[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2  
video signals.  
[Auto]: Performs playback at the dynamic  
range specified by the disc (BD-ROM  
only).  
[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4  
video signals.  
[RGB]: Select this when connecting to an  
equipment with an HDCP compliant DVI  
jack.  
[On]: The system reproduces the sound  
track with the kind of dynamic range that  
the recording engineer intended.  
[Off]: No compression of dynamic range.  
x [Attenuate - AUDIO]  
x [HDMI Deep Colour Output]  
[Auto]: Normally select this.  
[16bit], [12bit], [10bit]: Outputs 16bit/  
12bit/10bit video signals when the  
connected TV is compatible with Deep  
Colour.  
Distortion may occur when you listen to an  
equipment connected to the AUDIO IN  
(L/R) jacks. You can prevent distortion by  
attenuating the input level on the unit.  
[On]: Attenuates the input level. The output  
level will decrease at this setting.  
[Off]: Normal input level.  
[Off]: Select this when the picture is  
unstable or colors appear unnatural.  
45GB  
                       
x [Audio Output]  
x [Bluetooth AUDIO - AAC]  
You can select the output method where the  
audio signal is output.  
You can enable and disable AAC audio.  
[On]: AAC audio if the Bluetooth device  
supports AAC.  
[Off]: SBC audio.  
[Speaker]: Outputs multi-channel sound  
from the system’s speakers only.  
[Speaker + HDMI]: Outputs multi-channel  
sound from the system’s speakers and  
2-channel linear PCM signals from the  
HDMI (OUT) jack.  
[HDMI]: Outputs sound from the HDMI  
(OUT) jack only. Sound format depends on  
the connected equipment.  
Note  
You can enjoy high quality sound if the AAC is  
enabled. In case you cannot listen to AAC sound  
from your device, select [Off].  
Note  
[BD/DVD Viewing  
Settings]  
• When [Control for HDMI] is set to [On]  
(page 47), [Audio Output] is set to [Speaker +  
HDMI] automatically and this setting cannot be  
changed.  
x [BD/DVD Menu Language]  
You can select the default menu language  
When you select [Select Language Code],  
the display for entering the language code  
appears. Enter the code for your language  
by referring to “Language Code List”  
(page 63).  
• When [Audio Output] is set to [HDMI], the  
output signal format for the “TV” function is  
2-channel linear PCM.  
x [Sound Effect]  
You can turn on or off the system’s sound  
effects (SOUND MODE setting (page 21)).  
[Sound Mode On]: Enables the surround  
effect of the sound mode (page 21) and  
Football mode (page 22).  
x [Audio Language]  
You can select the default track language  
for BD-ROMs or DVD VIDEOs.  
When you select [Original], the language  
given priority in the disc is selected.  
When you select [Select Language Code],  
the display for entering the language code  
appears. Enter the code for your language  
by referring to “Language Code List”  
(page 63).  
[2ch Stereo]: This system outputs the sound  
from the front left/right speakers and  
subwoofer only. Multi-channel surround  
formats are downmixed to 2-channel.  
[Off]: The sound effects are disabled. You  
can hear sound as it is recorded.  
x [Speaker Settings]  
To obtain optimum surround sound, set the  
speakers. For details, see “Setting the  
Speakers” (page 38).  
46GB  
 
             
x [Subtitle Language]  
x [BD Parental Control]/[DVD  
Parental Control]/[Internet Video  
Parental Control]  
By setting Parental Control, scenes can be  
blocked or replaced with different scenes.  
Follow the on-screen instructions and enter  
your four-digit password.  
You can select the default subtitle language  
for BD-ROMs or DVD VIDEOs.  
When you select [Select Language Code],  
the display for entering the language code  
appears. Enter the code for your language  
by referring to “Language Code List”  
(page 63).  
x [Internet Video Unrated]  
[Allow]: Allows the playback of unrated  
Internet videos.  
[Block]: Blocks the playback of unrated  
Internet videos.  
x [BD Hybrid Disc Playback Layer]  
[BD]: Plays BD layer.  
[DVD/CD]: Plays DVD or CD layer.  
x [BD Internet Connection]  
[Allow]: Normally select this.  
[Do not allow]: Prohibits Internet  
connection.  
[System Settings]  
x [OSD Language]  
You can select the language you want for  
the system on-screen display.  
[Parental Control  
Settings]  
x [Main Unit illumination]  
[On]: The front panel display is always  
turned on and the brightness of the LED  
indicator is the maximum.  
[Auto]: The front panel display is turned  
off and the brightness of LED indicator is  
reduced automatically if you do not operate  
the system for about 10 seconds.  
x [Password]  
Set or change the password for the Parental  
Control function. A password allows you to  
set a restriction on BD-ROM, DVD  
VIDEO, or Internet video playback. If  
necessary, you can differentiate the  
restriction levels for BD-ROMs and DVD  
VIDEOs.  
x [HDMI Settings]  
[Control for HDMI]  
x [Parental Control Area Code]  
Playback of some BD-ROMs or DVD  
VIDEOs can be limited according to the  
geographic area. Scenes may be blocked or  
replaced with different scenes. Follow the  
on-screen instructions and enter your four-  
digit password.  
[On]: Turns on the [Control for HDMI]  
function. You can operate mutually  
between equipment that are connected with  
an HDMI cable.  
[Off]: Off.  
47GB  
                               
[Audio Return Channel]  
x [Software Update Notification]  
[On]: Sets the system to inform you of  
latest software version information  
(page 43).  
This function is available when you  
connect the system to a TV’s HDMI IN  
jack that is compatible with the Audio  
Return Channel function and [Control for  
HDMI] is set to [On].  
[Off]: Off.  
[Auto]: The system can receive the digital  
audio signal of the TV automatically via an  
HDMI cable.  
x [Gracenote Settings]  
[Auto]: Automatically downloads disc  
information when you stop playback of the  
disc. To download, the system must be  
connected to the network.  
[Manual]: Downloads disc information  
when [Video Search] or [Music Search] is  
selected.  
[Off]: Off.  
Note  
When you set the [Quick Start Mode] to [On], the  
[Control for HDMI] is automatically set to [Off].  
x [Quick Start Mode]  
[On]: Shortens the startup time from  
standby mode. You can operate the system  
quickly after turning it on.  
x [System Information]  
You can display the system’s software  
version information and the MAC address.  
[Off]: The default setting.  
Note  
x [Software License Information]  
You can display the Software License  
Information.  
When you set the [Control for HDMI] or [Remote  
Start] to [On], the [Quick Start Mode] is  
automatically set to [Off].  
x [Auto Standby]  
[On]: Turns on the [Auto Standby]  
function. When you do not operate the  
system for about 30 minutes, the system  
enters standby mode automatically.  
[Off]: Off.  
[Network Settings]  
x [Internet Settings]  
Connect the system to the network  
beforehand. For details, see “Step 3:  
Preparing for Network Connection”  
(page 18).  
x [Auto Display]  
[On]: Automatically displays information  
on the screen when changing the viewing  
titles, picture modes, audio signals, etc.  
[Off]: Displays information only when you  
press DISPLAY.  
[Wired Setup]: Select this when you  
connect to a broadband router using a LAN  
cable.  
[Wireless Setup(built-in)]: Select this when  
you use the built-in wireless LAN of the  
system for wireless network connection.  
x [Screen Saver]  
[On]: Turns on the screen saver function.  
[Off]: Off.  
Tip  
For further details, visit the following website and  
check the FAQ:  
48GB  
 
                           
x [Network Connection Status]  
Displays the current network connection  
status.  
x [Registered Remote Devices]  
Displays a list of your registered remote  
devices.  
Note  
x [Network Connection  
Diagnostics]  
To use this function, be sure to perform the  
software update (page 43).  
You can run the network diagnostic to  
check if the network connection has been  
made properly.  
x [Remote Start]  
[On]: Allows turn on the system by a  
device linked via network when the system  
is in standby mode.  
[Off]: The system cannot be turned on by a  
device linked via network.  
x [Connection Server Settings]  
Sets whether or not to display the  
connected DLNA server.  
Note  
x [Renderer Set-up]  
When you set the [Quick Start Mode] to [On], the  
[Remote Start] is automatically set to [Off].  
[Automatic Access Permission]: Sets  
whether or not to allow automatic access  
from a newly detected DLNA controller.  
[Smart Select]: Allows a Sony DLNA  
controller to find the system as the target  
equipment to operate by using the infrared  
ray. You can set this function to on or off.  
[Renderer Name]: Displays the system’s  
name as it is listed on other DLNA devices  
on the network.  
[Easy Network  
Settings]  
Runs [Easy Network Settings] to make the  
basic network settings. Follow the on-  
screen instructions.  
x [Renderer Access Control]  
Sets whether or not to accept commands  
from DLNA controllers.  
[Resetting]  
x [PARTY Auto Start]  
[On]: Starts a PARTY or joins an existing  
PARTY at the request of a networked  
device compatible with the PARTY  
STREAMING function.  
x [Reset to Factory Default Settings]  
You can reset the system settings to the  
factory default by selecting the group of  
settings. All the settings within the group  
will be reset.  
[Off]: Off.  
x [Initialise Personal Information]  
You can erase your personal information  
stored in the system.  
49GB  
                           
• Keep the system and discs away from  
components with strong magnets, such as  
microwave ovens, or large loudspeakers.  
• Do not place heavy objects on the system.  
• Do not place metal objects in front of the  
front panel. It may limit reception of  
radio waves.  
• Do not place the system in a place where  
medical equipment is in use. It may cause  
a malfunction of medical equipment.  
• If you use a pacemaker or other medical  
device, consult your physician or the  
manufacturer of your medical device  
before using the wireless LAN function.  
Additional Information  
Precautions  
On safety  
• Should any solid object or liquid fall into  
the cabinet, unplug the system and have it  
checked by qualified personnel before  
operating it any further.  
• Do not touch the AC power cord (mains  
lead) with wet hands. Doing so may cause  
an electric shock.  
On operation  
On power sources  
If the system is brought directly from a cold  
to a warm location, or is placed in a very  
damp room, moisture may condense on the  
lenses inside the unit. Should this occur, the  
system may not operate properly. In this  
case, remove the disc and leave the system  
turned on for about half an hour until the  
moisture evaporates.  
If you are not going to use the system for a  
long time, be sure to disconnect the system  
from the wall outlet. To disconnect the AC  
power cord (mains lead), grasp the plug  
itself; never pull the cord.  
On placement  
• Place the system in a location with  
adequate ventilation to prevent heat  
build-up in the system.  
• Although the unit heats up during  
operation, this is not a malfunction. If you  
continuously use this unit at a large  
volume, the cabinet temperature of the  
top, side and bottom rises considerably.  
To avoid burning yourself, do not touch  
the cabinet.  
• Do not place the unit on a soft surface  
(rugs, blankets, etc.) that might block the  
ventilation holes.  
• Do not install the system near heat  
sources such as radiators, air ducts, or in  
a place subject to direct sunlight,  
excessive dust, mechanical vibration, or  
shock.  
On adjusting volume  
Do not turn up the volume while listening  
to a section with very low level inputs or no  
audio signals. If you do, the speakers may  
be damaged when a peak level section is  
suddenly played.  
On cleaning  
Clean the cabinet, panel, and controls with  
a soft cloth slightly moistened with a mild  
detergent solution. Do not use any type of  
abrasive pad, scouring powder or solvent  
such as alcohol or benzine.  
On cleaning discs, disc/lens  
cleaners  
Do not use cleaning discs or disc/lens  
cleaners (including wet or spray types).  
These may cause the apparatus to  
malfunction.  
• Do not install the system in an inclined  
position. It is designed to be operated in a  
horizontal position only.  
50GB  
 
   
On replacement of parts  
In the events that this system is repaired,  
repaired parts may be retained for reuse or  
recycling purposes.  
On Bluetooth  
communication  
Bluetooth devices should be used within  
approximately 10 meters (unobstructed  
distance) of each other. The effective  
communication range may become  
shorter under the following conditions.  
– When a person, metal object, wall or  
other obstruction is between the devices  
with a Bluetooth connection  
On your TV’s color  
If the speakers cause the color irregularity  
on your TV screen, turn off the TV then  
turn it on after 15 to 30 minutes. If color  
irregularity persist, place the speakers  
further away from the TV set.  
– Locations where a wireless LAN is  
installed  
– Around microwave ovens that are in  
use  
– Locations where other electromagnetic  
waves occur  
Bluetooth devices and wireless LAN  
(IEEE 802.11b/g) use the same frequency  
band (2.4 GHz). When using your  
Bluetooth device near a device with  
wirelessLANcapability, electromagnetic  
interference may occur. This could result  
in lower data transfer rates, noise, or  
inability to connect. If this happens, try  
the following remedies:  
IMPORTANT NOTICE  
Caution: This system is capable of  
holding a still video image or on-screen  
display image on your TV screen  
indefinitely. If you leave the still video  
image or on-screen display image  
displayed on your TV for an extended  
period of time, you risk permanent  
damage to your TV screen. Plasma  
display panel televisions and projection  
televisions are especially susceptible to  
this.  
– Use this unit at least 10 meters away  
from the wireless LAN device.  
– Turn off the power to the wireless LAN  
equipment when using your Bluetooth  
device within 10 meters.  
On moving the system  
Before moving the system, make sure that  
there is no disc inserted, and disconnect the  
AC power cord (mains lead) from the wall  
outlet (mains).  
– Install this unit and Bluetooth device as  
closer to each other as possible.  
• The radio waves broadcast by this unit  
may interfere with the operation of some  
medical devices. Since this interference  
may result in malfunction, always turn off  
the power on this unit and Bluetooth  
device in the following locations:  
– In hospitals, on trains, in airplanes, at  
gas stations, and any place where  
flammable gasses may be present  
– Near automatic doors or fire alarms  
51GB  
• This unit supports security functions that  
comply with the Bluetooth specification  
to ensure secure connection during  
communication using Bluetooth  
technology. However, this security may  
be insufficient depending on the setting  
contents and other factors, so always be  
careful when performing communication  
using Bluetooth technology.  
Notes about Discs  
On handling discs  
• To keep the disc clean, handle the disc by  
its edge. Do not touch the surface.  
• Do not stick paper or tape on the disc.  
• Sony cannot be held liable in any way for  
damages or other loss resulting from  
information leaks during communication  
using Bluetooth technology.  
Bluetooth communication is not  
necessarily guaranteed with all Bluetooth  
devices that have the same profile as this  
unit.  
Bluetooth devices connected with this  
unit must comply with the Bluetooth  
specification prescribed by the Bluetooth  
SIG, Inc., and must be certified to  
comply. However, even when a device  
complies with the Bluetooth  
• Do not expose the disc to direct sunlight  
or heat sources such as hot air ducts, or  
leave it in a car parked in direct sunlight  
as the temperature may rise considerably  
inside the car.  
• After playing, store the disc in its case.  
On cleaning  
• Before playing, clean the disc with a  
specification, there may be cases where  
the characteristics or specifications of the  
Bluetooth device make it impossible to  
connect, or may result in different control  
methods, display or operation.  
cleaning cloth.  
Wipe the disc from the center out.  
• Noise may occur or the audio may cut off  
depending on the Bluetooth device  
connected with this unit, the  
communications environment, or  
surrounding conditions.  
• Do not use solvents such as benzine,  
thinner, commercially available cleaners,  
or anti-static spray intended for vinyl  
LPs.  
If you have any questions or problems  
concerning your system, please consult  
your nearest Sony dealer.  
This system can only play a standard  
circular disc. Using neither standard nor  
circular discs (e.g., card, heart, or star  
shape) may cause a malfunction.  
Do not use a disc that has a commercially  
available accessory attached, such as a  
label or ring.  
52GB  
 
 
Messages  
Troubleshooting  
[A new software version is available.  
Please go to the “Setup” section of  
the menu and select “Network  
Update” to perform the update.]  
appears on the TV screen.  
t See [Network Update] (page 43) to  
update the system to a latest software  
version.  
If you experience any of the following  
difficulties while using the system, use this  
troubleshooting guide to help remedy the  
problem before requesting repairs. Should  
any problem persist, consult your nearest  
Sony dealer.  
General  
“PRTECT”, “PUSH” and “POWER”  
appear alternately in the front panel  
display.  
t Press "/1 to turn off the system, and  
check the following items after  
“STBY” disappears.  
The power does not turn on.  
t Check that the AC power cord (mains  
lead) is connected securely.  
The remote control does not function.  
t The distance between the remote  
control and the unit is too far.  
t The batteries in the remote control are  
weak.  
• Are you using only the supplied  
speakers?  
• Is anything blocking the ventilation  
holes of the system?  
• After checking the above items and  
fixing any problems, turn on the  
system. If the cause of the problem  
cannot be found even after checking  
all the above items, consult your  
nearest Sony dealer.  
The disc tray does not open and you  
cannot remove the disc even after you  
press Z.  
t Try the following:  
1 Hold down N and Z on the unit  
for more than 5 seconds to open the  
disc tray.  
“LOCKED” appears in the front panel  
display.  
t Set the child lock function to off  
(page 40).  
2 Remove the disc.  
3 Disconnect the AC power cord  
(mains lead) from the wall outlet  
(mains), then reconnect after  
several minutes.  
“D. LOCK” appears in the front panel  
display.  
t Contact your nearest Sony dealer or  
local authorized Sony service facility.  
The system does not work normally.  
t Disconnect the AC power cord (mains  
lead) from the wall outlet (mains), then  
reconnect after several minutes.  
“Exxxx” (x is a number) appears in  
the front panel display.  
t Contact your nearest Sony dealer or  
local authorized Sony service facility  
and give the error code.  
53GB  
 
appears without any messages on  
the entire TV screen.  
t Contact your nearest Sony dealer or  
local authorized Sony service facility.  
An image is not displayed on the  
entire TV screen.  
t Check the setting of [TV Type] in  
[Screen Settings] (page 44).  
t The aspect ratio on the disc is fixed.  
Picture  
Color irregularity occurs on the TV  
screen.  
t If the speakers are used with a CRT-  
based TV or projector, install the  
speakers at least 0.3 meters from the  
TV set.  
There is no picture or the picture is  
not output correctly.  
t Check the output method on your  
system (page 16).  
t Hold down N and VOL – on the unit  
for more than 5 seconds to reset the  
video output resolution to the lowest  
resolution.  
t For BD-ROMs, check the [BD-ROM  
24p Output] settings in [Screen  
Settings] (page 45).  
t If the color irregularity persists, turn  
off the TV set once, then turn it on after  
15 to 30 minutes.  
t Make sure that no magnetic object  
(magnetic latch on a TV stand, health  
care device, toy, etc.) is placed near the  
speakers.  
There is no picture when you make an  
HDMI cable connection.  
t The unit is connected to an input  
device that is not HDCP (High-  
bandwidth Digital Content Protection)  
compliant (“HDMI” in the front panel  
does not light up) (page 16).  
Sound  
There is no sound.  
t The speaker cords are not connected  
securely.  
t Check the speaker settings (page 38).  
There is no sound from the TV via the  
HDMI (OUT) jack when using the  
Audio Return Channel function.  
t Set [Control for HDMI] in [HDMI  
Settings] of [System Settings] to [On]  
(page 47). Also, set [Audio Return  
Channel] in [HDMI Settings] of  
[System Settings] to [Auto] (page 48).  
t Make sure that your TV is compatible  
with the Audio Return Channel  
function.  
The dark area of the picture is too  
dark/the bright area is too bright or  
unnatural.  
t Set [Picture Quality Mode] to  
[Standard] (default) (page 33).  
Picture noise appears.  
t Clean the disc.  
t If the picture output from your system  
goes through your VCR to get to your  
TV, the copy-protection signal applied  
to some BD/DVD programs could  
affect picture quality. If you still  
experience problems even when you  
connect your unit directly to your TV,  
try connecting your unit to the other  
input jacks.  
t Make sure that an HDMI cable is  
connected to a jack on your TV that is  
compatible with the Audio Return  
Channel function.  
54GB  
 
The system does not output sound of  
TV programs correctly when  
connected to a set-top box.  
t Set [Audio Return Channel] in [HDMI  
Settings] of [System Settings] to [Off]  
(page 48).  
Playback  
The disc does not play.  
t The region code on the BD/DVD does  
t Moisture has condensed inside the unit  
and may cause damage to the lenses.  
Remove the disc and leave the unit  
turned on for about half an hour.  
t The system cannot play a recorded disc  
that is not correctly finalized  
t Check the connections (page 17).  
Severe hum or noise is heard.  
t Move your audio equipment away  
from the TV.  
t Clean the disc.  
(page 58).  
The sound loses stereo effect when  
you play a CD.  
File names are not displayed  
correctly.  
t The system can only display ISO  
8859-1 compliant character formats.  
Other character formats may be  
displayed differently.  
t Depending on the writing software  
used, the input characters may be  
displayed differently.  
t Select stereo sound by pressing  
AUDIO (page 34).  
Distortion occurs in the sound of a  
connected equipment.  
t Reduce the input level for the  
connected equipment by setting  
[Attenuate - AUDIO] (page 45).  
A disc does not start playing from the  
beginning.  
A sudden loud music is heard.  
t The build-in sound demonstration is  
activated. Press 2 – to reduce the  
volume or press x to stop the  
demonstration.  
t Resume play has been selected. Press  
OPTIONS and select [Play from start],  
then press  
.
Playback does not start from the  
resume point where you last stopped  
playing.  
t The resume point may be cleared from  
memory depending on the disc when  
• you open the disc tray.  
Tuner  
Radio stations cannot be tuned in.  
t Check that the antenna (aerial) is  
connected securely. Adjust the antenna  
(aerial).  
t The signal strength of the stations is  
too weak (when tuning in with  
automatic tuning). Use manual tuning.  
• you disconnect the USB device.  
• you play other content.  
• you turn off the unit.  
55GB  
The language for the soundtrack/  
subtitle or angles cannot be changed.  
t Try using the BD’s or DVD’s menu.  
t Multi-lingual tracks/subtitles or multi-  
angles are not recorded on the BD or  
DVD being played.  
BRAVIA Internet Video  
The picture/sound is poor/certain  
programs display with a loss of detail,  
especially during fast-motion or dark  
scenes.  
t Picture/sound quality may be poor  
depending on Internet content  
providers.  
t Picture/sound quality may be  
improved by changing the connection  
speed. Sony recommends a connection  
speed of at least 2.5 Mbps for standard-  
definition video and 10 Mbps for high-  
definition video.  
Bonus contents or other data that are  
contained in a BD-ROM cannot be  
played.  
t Try the following:  
1 Remove the disc.  
2 Turn the system off.  
3 Remove and reconnect the USB  
device (page 25).  
4 Turn the system on.  
t Not all videos contain sound.  
5 Insert the BD-ROM with  
BONUSVIEW/BD-LIVE.  
The picture is small.  
t Press V to zoom in.  
USB device  
“BRAVIA” Sync  
([Control for HDMI])  
The USB device is not recognized.  
t Try the following:  
1 Turn the system off.  
The [Control for HDMI] function does  
not work (“BRAVIA” Sync).  
t Check that [Control for HDMI] is set  
to [On] (page 47).  
t If you change the HDMI connection,  
turn the system off and on again.  
t If power failure occurs, set [Control  
for HDMI] to [Off], then set [Control  
for HDMI] to [On] (page 47).  
t Check the following and refer to the  
operating instructions supplied with  
the equipment.  
2 Remove and reconnect the USB  
device.  
3 Turn the system on.  
t Make sure that the USB device is  
securely connected to the (USB)  
port.  
t Check if the USB device or a cable is  
damaged.  
t Check if the USB device is on.  
t If the USB device is connected via a  
USB hub, disconnect it and connect  
the USB device directly to the unit.  
• The connected equipment is  
compatible with the [Control for  
HDMI] function.  
• The connected equipment’s setting  
for the [Control for HDMI] function  
is correct.  
56GB  
 
t Devices that use a 2.4 GHz frequency  
band, such as a microwave, Bluetooth,  
or digital cordless device, may  
interrupt communication. Move the  
unit away from such devices, or turn  
off such devices.  
t The wireless LAN connection may be  
unstable depending on the usage  
environment, especially while using  
the Bluetooth function of the system.  
In this case, adjust the usage  
Network connection  
The system cannot connect to the  
network.  
t Check the network connection  
(page 18) and the network settings  
(page 48).  
Wireless LAN  
connection  
environment.  
The wireless router you want is not  
shown in the wireless network list.  
t Press RETURN to return to the  
previous screen, and try [Wireless  
Setup(built-in)] again. If the wireless  
router you want is still not detected,  
select [Add a new address.] from the  
network list, then select [Manual  
Registration] to input a network name  
(SSID) manually.  
You cannot connect your PC to the  
Internet after [Wi-Fi Protected Setup  
(WPS)] is performed.  
t The wireless settings of the router may  
change automatically if you use the  
Wi-Fi Protected Setup function before  
adjusting the settings of the router. In  
this case, change the wireless settings  
of your PC accordingly.  
The system cannot connect to the  
network or the network connection is  
unstable.  
Bluetooth device  
t Check if the wireless LAN router is on.  
t Check the network connection  
(page 18) and the network settings  
(page 48).  
t Depending on the usage environment,  
including the wall material, radio wave  
reception conditions, or obstacles  
between the system and the wireless  
LAN router, the possible  
Pairing cannot be done.  
t Move the Bluetooth device closer to  
the unit.  
t Pairing may not be possible if other  
Bluetooth devices are present around  
the unit. In this case, turn off the other  
Bluetooth devices.  
t Delete the system from your Bluetooth  
device and perform pairing again  
(page 26).  
communication distance may be  
shortened. Move the system and the  
wireless LAN router closer to each  
other.  
Connecting cannot be done.  
t The pairing registration information  
has been erased. Perform the pairing  
operation again (page 26).  
57GB  
   
1)  
Since Blu-ray Disc specifications are new and  
evolving, some discs may not be playable  
depending on the disc type and version. Also,  
the audio output differs depending on the  
source, connected output jack, and selected  
audio settings.  
BD-RE: Ver.2.1  
BD-R: Ver.1.1, 1.2, 1.3 including organic  
pigment type BD-R (LTH type)  
BD-Rs recorded on a PC cannot be played if  
postscripts are recordable.  
A CD or DVD disc will not play if it has not  
been correctly finalized. For more information,  
refer to the operating instructions supplied with  
the recording device.  
There is no sound.  
t Make sure this system is not too far  
from the Bluetooth device, or this  
system is not receiving interference  
from a Wi-Fi network, other 2.4 GHz  
wireless device, or microwave oven.  
t Check that the Bluetooth connection is  
made properly between this system  
and the Bluetooth device.  
2)  
3)  
t Pair this system and the Bluetooth  
device again.  
t Keep the system away from metal  
objects or surfaces.  
t Make sure “BT” function is selected.  
t Adjust the volume of the Bluetooth  
device first, if the volume level is still  
too low, adjust the volume level on the  
unit.  
Discs that cannot be played  
• BDs with cartridge  
• BDXLs  
• DVD-RAMs  
• HD DVDs  
• DVD Audio discs  
• PHOTO CDs  
• Data part of CD-Extras  
• Super VCDs  
• Audio material side on DualDiscs  
The sound skips or fluctuates, or the  
connection is lost.  
t The unit and the Bluetooth device are  
too far apart.  
t If there are obstacles between the unit  
and your Bluetooth device, remove or  
avoid the obstacles.  
t If there is equipment that generates  
electromagnetic radiation, such as a  
wireless LAN, other Bluetooth device,  
or a microwave oven nearby, move  
them away.  
Notes on discs  
This product is designed to play back discs  
that conform to the Compact Disc (CD)  
standard.  
DualDiscs and some music discs encoded  
with copyright protection technologies do  
not conform to the Compact Disc (CD)  
standard. Therefore, these discs may not be  
compatible with this product.  
Playable Discs  
Note on playback  
operations of a BD/DVD  
1)  
Blu-ray Disc  
BD-ROM  
Some playback operations of a BD/DVD  
may be intentionally set by software  
producers. Since this system plays a  
BD/DVD according to the disc contents the  
software producers designed, some  
playback features may not be available.  
2)  
BD-R/BD-RE  
3)  
DVD  
DVD-ROM  
DVD-R/DVD-RW  
DVD+R/DVD+RW  
3)  
CD  
CD-DA (Music CD)  
CD-ROM  
CD-R/CD-RW  
58GB  
 
   
Note on double-layer  
BDs/DVDs  
The playback picture and sound may be  
momentarily interrupted when the layers  
switch.  
Music  
Audio Codec  
Extension  
*6  
MP3 (MPEG-1 Audio .mp3, .mka  
Layer III)  
*1  
*6  
*6  
AAC  
.m4a, .aac , .mka  
.wma  
*1  
Region code (BD-ROM/DVD  
VIDEO only)  
WMA9 Standard  
LPCM  
*6  
.wav, .mka  
Your system has a region code printed on  
the bottom of the unit and will only play a  
BD-ROM/DVD VIDEO (playback only)  
*6  
FLAC  
.flac, .fla  
*6  
AC3  
.ac3, .mka  
labeled with identical region codes or  
ALL  
.
Photo  
Photo Format  
JPEG  
Extension  
.jpeg, .jpg, .jpe  
*9  
Playable Types of Files  
Video  
PNG  
.png  
*9  
GIF  
.gif  
*6*10  
MPO  
.mpo  
Video Codec  
MPEG-1 Video  
MPEG-2 Video  
Container Extension  
*1  
The system may not play this file format on a  
DLNA server.  
The system can only play standard definition  
video on a DLNA server.  
The system does not play DTS format files on  
a DLNA server.  
The system can only play Dolby Digital  
format files on a DLNA server.  
The system can support AVC up to Level 4.1.  
The system does not play this file format on a  
DLNA server.  
The system can play AVCHD Ver.2.0 format  
(AVCHD 3D/Progressive).  
The system plays AVCHD format files that are  
recorded on a digital video camera, etc.  
The AVCHD format disc will not play if it has  
not been correctly finalized.  
The system does not play animated PNG or  
animated GIF files.  
*1  
*2  
PS  
PS  
.mpg, .mpeg  
.mpg, .mpeg  
.m2ts, .mts  
.avi  
*2  
*3  
*4  
*3  
*4  
TS  
Xvid  
AVI  
MKV  
MKV  
.mkv  
*5  
*1  
*5  
*6  
MPEG4/AVC  
.mkv  
*1  
MP4  
.mp4, .m4v  
.m2ts, .mts  
.mov  
*1  
TS  
*7  
*8  
Quick  
*6  
Time  
3gpp/  
3gpp2  
.3gp, .3g2,  
.3gpp, .3gp2  
*6  
*9  
*1  
VC1  
TS  
.m2ts, .mts  
.wmv, .asf  
.mov  
*1  
WMV9  
ASF  
*10  
For MPO files other than 3D, the key image or  
the first image is displayed.  
*6  
Motion JPEG  
Quick  
Time  
AVI  
.avi  
Video Format  
Container Extension  
*1*7  
AVCHD  
AVCHD Format  
Folder  
*8  
59GB  
     
Note  
• Some files may not play depending on the file  
format, the file encoding, the recording  
condition, or DLNA server condition.  
• Some files edited on a PC may not play.  
• Some files may not be able to perform fast  
forward or fast reverse function.  
Supported Audio  
Formats  
Audio formats supported by this system are  
as follows.  
• The system does not play coded files such as  
DRM and Lossless.  
Function  
• The system can recognize the following files or  
folders in BDs, DVDs, CDs and USB devices:  
– up to folders in the 9th layer (including the  
root folder)  
– up to 500 files/folders in a single layer  
• The system can recognize the following files or  
folders stored in the DLNA server:  
– up to folders in the 19th layer  
Format  
“BD/DVD”  
“TV”  
(DIGITAL IN)  
LPCM 2ch  
a
a
a
LPCM 5.1ch,  
LPCM 7.1ch  
Dolby Digital  
a
a
a
– up to 999 files/folders in a single layer  
• The system can support frame rate:  
– up to 60 fps for AVCHD only.  
Dolby TrueHD,  
Dolby Digital  
Plus  
– up to 30 fps for other video codecs.  
• The system can support video bit rate up to  
40 Mbps.  
DTS  
a
a
DTS-ES  
a*  
a*  
• The system can support video resolution up to  
1920 × 1080p.  
• Some USB devices may not work with this  
system.  
• The system can recognize Mass Storage Class  
(MSC) devices (such as flash memory or an  
HDD), Still Image Capture Devices (SICDs),  
and 101-key keyboards.  
Discrete 6.1,  
DTS-ES Matrix  
6.1  
DTS96/24  
a
a
a*  
DTS-HD High  
Resolution  
Audio  
• The system may not play high bit rate video files  
from a DATA CD smoothly. It is recommended  
to play high bit rate video files using a DATA  
DVD or DATA BD.  
DTS-HD Master  
Audio  
a
a: Supported format.  
–: Unsupported format.  
* Decoded as DTS core.  
Note  
For LPCM 2ch format, the supported sampling  
frequency of the digital signal is up to 48 kHz  
when using the “TV” function.  
60GB  
 
 
Bluetooth Section  
Communication system  
Bluetooth Specification version 3.0  
Output  
Bluetooth Specification Power Class 2  
Maximum communication range  
Specifications  
Amplifier Section  
POWER OUTPUT (rated)  
Front L/Front R:  
1)  
Line of sight approx. 10 m  
40 W + 40 W (at 3 ohms, 1 kHz,  
1% THD)  
Frequency band  
2.4 GHz band  
POWER OUTPUT (reference)  
Front L/Front R:  
40 W (per channel at 3 ohms, 1 kHz)  
Subwoofer:  
70 W (at 6 ohms, 80 Hz)  
Inputs (Analog)  
AUDIO IN  
Sensitivity: 2 V/700 mV  
Inputs (Digital)  
TV (Audio Return Channel/OPTICAL)  
Supported formats: LPCM 2CH (up to  
48 kHz), Dolby Digital, DTS  
Modulation method  
FHSS (Freq Hopping Spread Spectrum)  
Compatible Bluetooth profiles  
2)  
A2DP 1.2 (Advanced Audio Distribution  
Profile)  
AVRCP 1.3 (Audio Video Remote  
Control Profile)  
3)  
Supported Codecs  
4)  
SBC , AAC  
Transmission range (A2DP)  
20 Hz – 20,000 Hz (Sampling frequency  
44.1 kHz, 48 kHz)  
HDMI Section  
Connector  
1)  
The actual range will vary depending on factors  
such as obstacles between devices, magnetic  
fields around a microwave oven, static  
electricity, cordless phone, reception  
sensitivity, antenna’s performance, operating  
system, software application, etc.  
Bluetooth standard profiles indicate the purpose  
of Bluetooth communication between devices.  
Codec: Audio signal compression and  
conversion format  
Type A (19pin)  
BD/DVD/CD System  
Signal format system  
NTSC/PAL  
2)  
USB Section  
(USB) port:  
3)  
Type A (For connecting USB memory,  
memory card reader, digital still camera,  
and digital video camera)  
4)  
Subband Codec  
LAN Section  
LAN (100) terminal  
FM Tuner Section  
System  
PLL quartz-locked digital synthesizer  
Tuning range  
87.5 MHz – 108.0 MHz (50 kHz step)  
Antenna (aerial)  
100BASE-TX Terminal  
Wireless LAN Section  
Standards Compliance  
IEEE 802.11 b/g/n  
Frequency and Channel  
2.4 GHz band: channels 1–13  
FM wire antenna (aerial)  
61GB  
 
Speakers  
Front (SS-TSB121)  
Dimensions (w/h/d) (approx.)  
95 mm × 189 mm × 80 mm  
Mass (approx.)  
0.49 kg (with speaker cord)  
Subwoofer (SS-WSB121)  
Dimensions (w/h/d) (approx.)  
177 mm × 280 mm × 245 mm  
Mass (approx.)  
2.7 kg (with speaker cord)  
General  
Power requirements  
220 V – 240 V AC, 50/60 Hz  
Power consumption  
On: 60 W  
Standby: 0.3 W (For details on the  
setting, see page 40.)  
Dimensions (w/h/d) (approx.)  
430 mm × 50.5 mm × 296 mm incl.  
projecting parts  
Mass (approx.)  
2.6 kg  
Design and specifications are subject to  
change without notice.  
• Standby power consumption: 0.3W  
• Over 85% power efficiency of amplifier  
block is achieved with the full digital  
amplifier, S-Master.  
62GB  
 
Language Code List  
The language spellings conform to the ISO 639: 1988 (E/F) standard.  
Code Language  
1027 Afar  
1028 Abkhazian  
1032 Afrikaans  
1039 Amharic  
1044 Arabic  
1045 Assamese  
1051 Aymara  
1052 Azerbaijani  
1053 Bashkir  
1057 Byelorussian 1233 Armenian  
1059 Bulgarian  
1060 Bihari  
1061 Bislama  
1066 Bengali;  
Bangla  
1067 Tibetan  
1070 Breton  
1079 Catalan  
1093 Corsican  
1097 Czech  
1103 Welsh  
1105 Danish  
1109 German  
1130 Bhutani  
1142 Greek  
1144 English  
1145 Esperanto  
1149 Spanish  
1150 Estonian  
1151 Basque  
1157 Persian  
1165 Finnish  
1166 Fiji  
Code Language  
1183 Irish  
1186 Scots Gaelic 1349 Macedonian  
1194 Galician  
1196 Guarani  
1203 Gujarati  
1209 Hausa  
1217 Hindi  
Code Language  
1347 Maori  
Code Language  
1507 Samoan  
1508 Shona  
1509 Somali  
1511 Albanian  
1512 Serbian  
1513 Siswati  
1514 Sesotho  
1515 Sundanese  
1516 Swedish  
1517 Swahili  
1521 Tamil  
1350 Malayalam  
1352 Mongolian  
1353 Moldavian  
1356 Marathi  
1357 Malay  
1358 Maltese  
1363 Burmese  
1365 Nauru  
1369 Nepali  
1376 Dutch  
1379 Norwegian  
1393 Occitan  
1403 (Afan)Oromo 1529 Tigrinya  
1226 Croatian  
1229 Hungarian  
1235 Interlingua  
1239 Interlingue  
1245 Inupiak  
1248 Indonesian  
1253 Icelandic  
1254 Italian  
1257 Hebrew  
1261 Japanese  
1269 Yiddish  
1283 Javanese  
1287 Georgian  
1297 Kazakh  
1298 Greenlandic  
1299 Cambodian  
1300 Kannada  
1301 Korean  
1305 Kashmiri  
1307 Kurdish  
1311 Kirghiz  
1525 Telugu  
1527 Tajik  
1528 Thai  
1408 Oriya  
1531 Turkmen  
1532 Tagalog  
1534 Setswana  
1535 Tonga  
1538 Turkish  
1539 Tsonga  
1540 Tatar  
1543 Twi  
1557 Ukrainian  
1564 Urdu  
1417 Punjabi  
1428 Polish  
1435 Pashto;  
Pushto  
1436 Portuguese  
1463 Quechua  
1481 Rhaeto-  
Romance  
1482 Kirundi  
1483 Romanian  
1489 Russian  
1572 Uzbek  
1581 Vietnamese  
1491 Kinyarwanda 1587 Volapük  
1495 Sanskrit  
1498 Sindhi  
1501 Sangho  
1502 Serbo-Croatian 1684 Chinese  
1503 Singhalese  
1505 Slovak  
1613 Wolof  
1632 Xhosa  
1665 Yoruba  
1313 Latin  
1326 Lingala  
1327 Laothian  
1332 Lithuanian  
1334 Latvian;  
Lettish  
1697 Zulu  
1171 Faroese  
1174 French  
1181 Frisian  
1506 Slovenian  
1345 Malagasy  
1703 Not specified  
63GB  
   
Parental Control/Area Code List  
Code Area  
Code Area  
Code Area  
Code Area  
2044 Argentina  
2047 Australia  
2046 Austria  
2057 Belgium  
2070 Brazil  
2090 Chile  
2092 China  
2093 Colombia  
2115 Denmark  
2165 Finland  
2174 France  
2109 Germany  
2200 Greece  
2219 Hong Kong  
2248 India  
2238 Indonesia  
2239 Ireland  
2254 Italy  
2276 Japan  
2304 Korea  
2333 Luxembourg  
2363 Malaysia  
2362 Mexico  
2376 Netherlands  
2390 New Zealand 2543 Taiwan  
2499 Sweden  
2086 Switzerland  
2379 Norway  
2427 Pakistan  
2424 Philippines  
2428 Poland  
2436 Portugal  
2489 Russia  
2501 Singapore  
2149 Spain  
2528 Thailand  
2184 United  
Kingdom  
64GB  
 
Index  
Numerics  
3D 24  
3D Output Setting 44  
A
A/V SYNC 34  
Attenuate - AUDIO 45  
Audio DRC 45  
Audio Language 46  
Audio Output 46  
Audio Return Channel 48  
Audio Settings 45  
Auto Display 48  
Easy Setup 20  
Auto Standby 48  
B
BD Audio MIX Setting 45  
BD Hybrid Disc Playback Layer 47  
BD Internet Connection 47  
BD Parental Control 47  
BD/DVD Menu Language 46  
BD/DVD Viewing Settings 46  
BD-LIVE 23  
G
Gracenote Settings 48  
H
BD-ROM 24p Output 45  
Bluetooth 25  
BONUSVIEW 23  
HDMI  
YCbCr/RGB (HDMI) 45  
HDMI Deep Colour Output 45  
BRAVIA Sync 37  
I
C
Initialise Personal Information 49  
Internet content 29  
CD 58  
Child Lock 40  
Internet Settings 48  
Cinema Conversion Mode 44  
Connection Server Settings 49  
Control for HDMI 37, 47  
Internet Video Parental Control 47  
Internet Video Unrated 47  
L
Language Code List 63  
65GB  
 
M
Main Unit illumination 47  
Multiplex broadcast sound 35  
Software License Information 48  
Sound Effect 46  
Speaker Settings 38, 46  
Distance 38  
N
Network Connection Diagnostics 49  
Network Settings 48  
Network Update 43  
NFC 27  
Level 39  
Subtitle Language 47  
O
OSD Language 47  
P
Test Tone 39  
Parental Control Area Code 47  
Parental Control Settings 47  
PARTY Auto Start 49  
Password 47  
TV Screen Size Setting for 3D 44  
TV Type 44  
Pause Mode 45  
Play information 24  
Playable discs 58  
USB 25  
Q
W
Quick Start Mode 48  
WEP 19  
WPA2-PSK (AES) 19  
WPA2-PSK (TKIP) 19  
WPA-PSK (AES) 19  
WPA-PSK (TKIP) 19  
R
RDS 37  
Rear panel 11  
Region code 59  
Registered Remote Devices 49  
Remote control 12  
Remote Start 49  
Renderer Access Control 49  
Renderer Set-up 49  
Reset to Factory Default Settings 49  
Resetting 49  
66GB  
 
 
The software of this system may be updated in the future. To find out details on any  
available updates, please visit the following URL.  
©2013 Sony Corporation  
 

Shark Vacuum Cleaner MV2010WC User Manual
Soleus Air Air Conditioner SG WAC 10ESE User Manual
Sony Ericsson Cell Phone K300c User Manual
Sony Headphones DR BT10CX User Manual
Sony Projector CX75 User Manual
Sony Satellite TV System SAT A1 User Manual
Sun Microsystems Computer Accessories 819468310 User Manual
Sun Microsystems Home Theater Server X4500 User Manual
SVA Security Camera CDR 1206 User Manual
Sylvania TV VCR Combo SSC191 User Manual