Sony Headphones MDR EX80LP User Manual

4-194-247-12(1)  
English  
Stereo headphones  
Operating Instructions  
Features  
Manual de instrucciones  
Stereo  
Headphones  
High-density acoustic resistor for deep bass  
Angled earbud structure for stable and comfortable wearing  
SS size earbuds supplied for small ears (3 sizes supplied: SS, S, M)  
Hybrid silicone rubber earbuds for secure fitting and long-term wearing comfort  
400 kJ/m3 high power neodymium magnets produce high-resolution treble and  
midrange with powerful bass  
Y-type cord with cord slider to prevent cord tangling  
How to use  
MDR-EX80LP  
Wearing the headphones (see fig. )  
Wear the earpiece marked in your right ear and the one marked in your left ear.  
There is a tactile dot on the unit marked to distinguish the left side.  
©2010 Sony Corporation Printed in Thailand  
Tactile dot  
Using the cord slider (see fig. -)  
Move up and down to change the split position of the cord.  
Installing the earbuds correctly (see fig. )  
If the earbuds do not fit your ears correctly, low-bass sound may not be heard. To enjoy  
better sound quality, change the earbuds to another size, or adjust the earbuds position to  
sit on your ears comfortably and fit your ears snugly.  
If the earbuds do not fit your ears, try another size. When you change the earbuds, install  
them firmly on the headphones to prevent the earbud from detaching and remaining in  
your ear.  
L-shaped  
stereo mini plug  
To check earbud sizes  
The earbud sizes are distinguished by a line pattern (see fig. -).  
Approx. 1.2 m  
To detach an earbud (see fig. -,)  
While holding the headphone, twist the parts inside of the earbud and pull the earbud  
off.  
Tip  
If the earbud slips and cannot be detached, wrap it in a dry soft cloth.  
To attach an earbud (see fig. -)  
Push the parts inside of the earbud into the headphone until the projecting part of the  
headphone is fully covered.  
SS  
S
M
To clean the earbuds  
Remove the earbuds from the headphones, and wash them with a mild detergent solution.  
Specifications  
Type:  
Closed, dynamic  
9 mm, dome type (CCAW)  
Driver unit:  
Power handling capacity:  
1 line  
2 lines  
3 lines  
100 mW (IEC*)  
16 Ω at 1 kHz  
100 dB/mW  
Impedance:  
Sectional View  
Sensitivity:  
Frequency response:  
5 – 23,000 Hz  
Inside parts  
Cord:  
Plug:  
Mass:  
Approx. 1.2 m (47 1/4 in), OFC Litz cord Y-type  
Gold-plated L-shaped stereo mini plug  
Approx. 3 g (0.11 oz) (without cord)  
Supplied accessories  
Earbuds SS (2), S (2), M (2)  
Card warranty (1)  
Operating Instructions (1)  
* IEC = International Electrotechnical Commission  
Design and specifications are subject to change without notice.  
Precautions  
Please keep your headphones clean at all times especially inside the rubber earbud.  
(see fig. )  
If any dust or ear wax is inside the earbud, you may experience some listening  
difficulties.  
Listening with headphones at high volume may affect your hearing. For traffic safety,  
do not use while driving or cycling.  
The earbuds may deteriorate due to long-term storage or use.  
Install the earbuds firmly onto the headphones. If an earbud accidentally detaches and  
is left in your ear, it may cause injury.  
Note on static electricity  
In particularly dry air conditions, mild tingling may be felt on your ears. This is a result  
of static electricity accumulated in the body, and not a malfunction of the headphones.  
The effect can be minimized by wearing clothes made from natural materials.  
Optional replacement earbuds can be ordered from your nearest Sony dealer.  
 

Silex technology Printer PRICOM C 6400W User Manual
Singer Sewing Machine 119 2 User Manual
Snapper Lawn Aerator 3536 User Manual
Sony Computer Drive CRX225A User Manual
Sony Cordless Telephone SPP IM977 User Manual
Sony Microcassette Recorder 427AD User Manual
Sony MiniDisc Player MZ G755 User Manual
Sony MP3 Player WM FX888 User Manual
Sony Speaker SRS D101 User Manual
StreamLight Computer Hardware TX4302 User Manual