Shure Headphones E4c User Manual

WEARING THE EARPHONES  
Three popular methods for wearing the earphones are illustrated below.  
INSERTING THE EARPHONES  
E4c  
If the earphone seems to be lacking in low frequency response (bass), check  
the tightness of the seal between the earphone and your ear, or try one of the  
other sleeve options.  
Sound Isolating Earphones  
The E4c earphone features High-  
Definition drivers with Tuned-Port  
technology for an ultra-wide frequency  
soundstage with brilliant  
highs and extended bass.  
As the ideal companion  
Warning: Do not push the earphone sleeve beyond the ear canal opening.  
to any portable or home  
audio source, the E4c  
incorporates the same  
right ear  
left ear  
precision components  
used by professional  
musicians to bring  
incredibly accurate sound  
with remarkable isolation.  
Over the ear  
in back  
Over the ear  
in front  
Straight down  
Make sure that the sleeve completely  
covers the earphone nozzle. If any part  
of the nozzle is exposed, the sleeve is  
not properly installed.  
Tighten the cable and take up slack by raising the cable sleeve .  
©2005, Shure Incorporated  
27EN3189B (Rev. 4)  
Printed in U.S.A.  
CHOOSING AN EARPHONE SLEEVE  
CLEANING THE EARPHONE NOZZLE  
FULL TWO YEAR WARRANTY  
Your earphones come with a selection of sleeves. Make sure the sleeve you  
use is easy to insert into your ear, fits comfortably, and is easy to remove from  
your ear.  
If the nozzle of your earphone is blocked, clean the nozzle using the supplied  
wax removal loop.  
Shure Incorporated (“Shure”) hereby warrants that this product will be free  
from defects in materials and workmanship for a period of two years from  
the date of purchase. At its option Shure will repair or replace the defective  
product and promptly return it to you, or refund the purchase price. You should  
retain proof of purchase to validate the purchase date and return it with any  
warranty claim.  
Wax Removal Loop  
Flex Sleeves  
In small, medium, and large sizes. Made from translucent  
PVC.  
If you believe this product is defective within the warranty period, carefully  
repack the unit, insure it, and return it postage prepaid to:  
Nozzle  
Soft Flex Sleeves  
In small, medium, and large sizes. Made from pliable rubber.  
Shure Incorporated  
5800 W. Touhy Ave.  
Niles, IL 60714-4608  
When cleaning, do not force any object through the earphone nozzle! This will  
damage the earphone sound filter.  
Foam Sleeves  
When using the foam sleeves, compress the sleeve between  
your fingers before inserting it into the ear canal. Hold the  
earphone in place for about ten seconds while the foam  
expands and creates a tight seal.  
If necessary, the supplied replacement nozzles may be used. See the back of  
this guide for instructions on nozzle replacement.  
SHURE Incorporated http://www.shure.com  
United States, Canada, Latin America, Caribbean:  
5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.  
Phone: 847-600-2000 U.S. Fax: 847-600-1212 Int’l Fax: 847-600-6446  
Europe, Middle East, Africa:  
Triple-Flange Sleeves  
If desired, the sleeve nozzle may be shortened. Use sharp  
scissors to carefully trim the nozzle to the desired length.  
Shure Europe GmbH, Phone: 49-7131-72140 Fax: 49-7131-721414  
Asia, Pacific:  
Shure Asia Limited, Phone: 852-2893-4290 Fax: 852-2893-4055  
 

Sennheiser Microphone 509 User Manual
Shark Vacuum Cleaner NV42 User Manual
Sharp Cell Phone GT I9000 User Manual
Shiro Cordless Telephone SD8101 User Manual
Sony Camcorder CCD TR403 User Manual
Sony Home Theater Screen PFM 42B1 User Manual
Sony Network Card AC V100 B User Manual
Sony Portable CD Player CFD S28L User Manual
Stanley Black Decker Tool Storage 36800 User Manual
SVAT Electronics Home Security System VISS7500 User Manual