Radio Shack Stereo Receiver 15 1988 User Guide

Operation  
dvd  
vcr  
auto manual cbl/sat  
aux  
Auto Mode  
Auto-Sensing 4-Way  
After power up, AUTO CHANNEL SELECT is performed to select the active source from the four input  
groups. They are AUX, DVD, VCR and Cable/Satellite. The AUTO LED will light up to indicate the unit is  
in auto mode. If video signals are detected from more than one input positions, the switch will stay on the  
highest position, according to priority, and a blue LED lights to indicate the selected input position.  
The priority levels, in descending order, are:  
Audio/Video Selector Switch  
with RF Modulator  
Cat. No. 15-1988  
1. Aux S-Video (highest priority)  
3. DVD S-Video  
5. VCR Video  
2. Aux Video  
4. DVD Video  
6. Cable S-Video  
Thank you for purchasing the RadioShack Auto-Sensing 4-Way Audio/Video  
Selector Switch with RF Modulator. Your selector switch provides four sets of input  
jacks and two sets of output jacks. The input jacks include three  
7. Cable Video (lowest priority)  
S-videos, four sets of A/V jacks and two RF F-connectors. The output jacks include  
two RF F-connectors, two S-videos and two sets of A/V jacks.  
You can use the switch to connect up to four audio/video components, such as  
direct-to-home satellite systems, VCRs, DVD players, laser-disc players, cable  
boxes, or video game systems into standard CH 3 or CH 4 TV signals that you can  
watch on any regular TV.  
Note: Some devices emit blue screen output for up to two minutes after they are powered off. If any input  
device is powered off but still emits a blue screen output, the selector will not switch to the next input  
device. You will need to press manual to select the desired video inputs.  
AUX Input  
Manual Mode  
You can also select the desired video channel manually by pressing manual. Repeatedly pressing  
manual allows you to switch between the four input positions (dvd, vcr, cbl/sat, aux).  
To resume auto mode, press auto.  
Notes:  
Connections  
Any manual selection will be cleared after power up, because AUTO CHANNEL SELECT is  
performed automatically.  
Use cables with stereo audio/video plugs to make all connections. For best performance, use high-quality audio/video cables. Do not use audio cables for video. The selectors  
color-coded jacks make it easy to connect devices to the switch. Yellow jacks are for video. Red jacks are for right audio. White jacks are for left audio.  
If a device does not have a S-Video cable, connect its video output to the switchs input jack for that device. If the device has an S-Video cable, connect it to the S-Video input  
jack. A devices inputs should always connect to the corresponding outputs.  
You can manually select any video group even though there is no signal present.  
If you choose the VCR group without a video input, VCR RF is made active. You have to use the  
VCR's control instead of the TV's control to select a channel.  
If your TV or monitor does not accept an S-Video cable, connect its video input to TO TV (OR VCR, ETC.), or connect a cable with an f-connector from the TV’s antenna input to  
CABLE/ANT.  
There is an Aux IN input at the front of the switchs cabinet. You can connect your game system or other device with an S-video cable or A/V cables to the Aux IN.  
Note: If FROM VCR input is selected, there is no output from TO VCR. For video recording, you must connect TO TV (OR VCR, ETC.) to the input of the recording device, or  
connect the source device to another input.  
If you choose the CBL/SAT group without a video input, CBL/SAT RF is set active. You have to use  
the cable or satellite receiver's control instead of the TV's control to select a channel.  
There is no demodulation of RF inputs.  
Limited 90 Day Warranty  
Set the CHANNEL 3/4 switch to match the unpopulated frequency in your area. For example, if there is an active channel 4 in your area, set the switch to 3.  
This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for ninety (90) days from the date of purchase from RadioShack company-owned stores and authorized  
RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR  
RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR  
ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY  
INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
DVD  
VCR  
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.  
In the event of a product defect during the warranty period, take the product and the RadioShack sales receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option, unless otherwise provided by law: (a)  
correct the defect by product repair without charge for parts and labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase price. All replaced parts and products, and products on which a refund is  
made, become the property of RadioShack. New or reconditioned parts and products may be used in the performance of warranty service. Repaired or replaced parts and products are warranted for the remainder of the original warranty  
period. You will be charged for repair or replacement of the product made after the expiration of the warranty period.  
OR  
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse, accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or maintenance, alteration, lightning  
or other incidence of excess voltage or current; (b) any repairs other than those provided by a RadioShack Authorized Service Facility; (c) consumables such as fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or  
insurance costs; or (f) costs of product removal, installation, set-up service adjustment or reinstallation.  
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state  
OR  
AC Adapter  
RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102  
12/99  
FCC Information  
Specifications  
RF output level:........................................... 3dB mV  
RF output channels:........................................ 3 or 4  
RF output impedance:................................ 75 ohms  
Video input impedance............................... 75 ohms  
TV to ANT insertion loss:........... (50-806MHz): 3dB  
Specifications are typical; individual units might  
vary. Specifications are subject to change and  
improvement without notice. Actual product may  
vary from the product images in this document.  
TO VCR  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)  
this device may not cause harmful interference, and (2) this device must accept any interference received,  
including interference that may cause undesired operation.  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses and can radiate radio frequency  
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to  
radio communications.  
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does  
cause harmful interference to radio or television reception, which can be determined by turning the equipment  
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  
TO TV (OR VCR, ETC.)  
Connect the adapter here.  
OR  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult your local RadioShack store or an experienced radio/TV technician for help.  
If you cannot eliminate the interference, the FCC requires that you stop using your selector switch.  
OR  
What’s Included  
Changes or modifications not expressly approved by RadioShack may cause interference and void the users  
authority to operate the equipment.  
This users guide— 4-way switch  
AC adapter — Lables  
Product: Audio/Video Selector Switch  
Model: 15-1988  
Responsible Party: RadioShack  
100 Throckmorton  
©2004 RadioShack Corporation  
All Rights Reserved.  
15-1988  
Fort Worth, TX 76102  
Printed in China  
Satellite receiver  
RadioShack and RadioShack.com are trademarks  
04A04  
Part # AO0208AAA1  
TV  
Phone: 817-415-3200  
used by RadioShack Corporation.  
 

Regency Indoor Fireplace H15 User Guide
RIDGID Caulking Gun R8804 User Guide
Roberts Radio Portable Radio RP16 User Guide
Rosewill Network Card RC 303 User Guide
Russell Hobbs Microwave Oven RHM2506 User Guide
Samsung Air Conditioner SC18TB1 User Guide
Samsung Computer Drive HM250HJ User Guide
SanDisk MP3 Player TakeTV User Guide
Scag Power Equipment Lawn Mower 70001, 79999 User Guide
Seagate Computer Drive ST150176LW LC User Guide