Philips Cell Phone X810 User Manual

How to ...  
Discover Your Phone  
Switch the  
phone On/Off  
Long press  
)..  
Back of the phone:  
3.2 mega pixels  
camera  
262K color  
TFT LCD  
Enter your PIN  
code  
Enter your PIN code  
through the on-screen  
keypad and tap on OK to  
confirm.  
Touch screen  
slide  
Light sensor  
Left softkey  
On-screen  
keypad  
Turn on the Press any key to exit the  
screen  
power-saving mode.  
Right softkey  
Navigation and  
O (OK) keys  
Unlock  
keypad  
the Drag out the innermost dot.  
Hang up and  
on/off key  
Microphone  
Camera key  
Or, push up the slide.  
Lock  
keypad  
the On idle screen, tap on  
Pick-up key  
Shortcut > Phone lock.  
Charger or  
Headset  
connector/  
USB port  
Make a call  
On idle screen, tap on  
Shortcut > Call (or, push up  
the slide to use the keypad)  
to enter the phone number.  
Alphanumeric  
keypad  
Philips continuously strives to improve its products.  
Therefore, Philips reserves the rights to revise this  
user guide or withdraw it at any time without prior  
notice. Philips provides this user guide “as is” and  
does not accept, except as required by applicable  
law, liability for any error, omission or discrepancy  
between this user guide and the product described.  
The device is meant to be connected to GSM/GPRS  
networks.  
Press  
When the phone rings,  
press  
the Press  
(.  
Answer a call  
(
.
Adjust  
+
or  
-.  
volume during  
a call  
 
To select your option, tap on the icons and lists, and  
then OK. Tap on Options to access the options  
related to the selected item. Tap on Back to return  
Menus  
Main menu  
The main menu gives you access to all the different  
features of your mobile phone. The table below  
summarizes the functional icons on the main menu.  
To find more information about their functions,  
refer to the pages.  
to the previous menu. Press  
screen.  
)
to return to the idle  
Built-in functional displays  
With the six built-in functional displays on the idle  
screen, you can easily operate functions by tapping  
on the touch screen. On the idle screen, the six  
functional displays allow you to easily set/display  
the clock, view calendar/schedule your time, edit/  
show your memo, set/show world clock, play  
music, and listen to radio.  
Browser  
Fun  
Music  
page 38  
Camera  
page 34  
Messaging  
page 40  
My files  
To switch between built-in functional  
displays  
• On current functional display, quickly move your  
finger to the left or right.  
page 35  
Tools  
page 18  
Contacts  
page 45  
Profiles  
Or, long press <or > to move to another  
functional display.  
• Or, shake your phone to the left or right.  
page 28  
Bluetooth  
page 25  
Calls  
page 51  
Settings  
To operate on built-in functional displays  
Tap on the central soft key on the idle screen.  
Or, press O.  
Shortcut menu  
page 49  
page 47  
page 52  
The shortcut menu consists of up to 8 shortcuts to  
Tap on Menu on idle screen to access the main menu.  
2
 
   
functional displays. Extend your quick access to  
functional displays by selecting shortcuts to those  
other than the six ones.  
instructions.  
Keys  
To set your shortcut menu  
1. Go to Settings > General > Shortcut.  
2. Tap on Change to show the list of functional  
displays.  
3. To select/ unselect an option, tap on it, and  
then Select /Uncheck.  
Soft keys  
The soft keys L, R and O allow you to select  
the options above them on the screen. Such  
options are contextual: they vary according to  
current context.  
4. Tap on Done to finish setting.  
Fast keys  
To use your shortcut menu  
On the idle screen, tap on Shortcut, and you can  
select a functional display as desired.  
0
1
#
Long press to enter “+” when  
making international calls.  
Long press to access the voice  
mailbox.  
The idle screen switches to the relevant display.  
Stylus  
Long press to select/unselect  
Meeting profile (by default,  
vibration on for incoming calls  
or messages).  
The touch screen allows you to enter text by  
directly writing on the screen, or tap to select the  
desired option. The supplied stylus makes it easier  
to do so.  
The first time you switch on the phone, you are  
asked to do calibration for the stylus. Thus, strokes  
or taps by the stylus will be precisely displayed on  
the screen.  
Senors  
With built-in motion and light sensors, the phone  
can react to motion and ambient luminance as  
desired or necessary.  
You can also do the calibration in Settings > General  
>
Pen calibration by following the screen  
3
 
   
To use the motion sensor  
• In Settings > Motion sensor > Mute incoming call or  
Snooze mode, select On.  
If a call rings, turn over the phone (front side to  
back, or back side to front) to mute the ringtone.  
In the idle mode, your phone can have the keypad  
locked automatically after the set time span. When  
the keypad is locked, a set of concentric circles  
keep moving on the screen.  
To set the auto keypad lock  
Go to Settings > General > Auto keypad lock.  
To unlock the keypad  
Drag out the innermost dot. Or, push up the slide.  
To interrupt the sounding alarm in the same way,  
check that the Snooze is set to a time interval in  
Tools > Alarm (see "To set an alarm" on page 30).  
To stop the alarm, tap on Stop (see "To use an  
alarm" on page 30).  
To lock the keypad manually  
On the idle screen, tap on Shortcut > Phone lock.  
Or, pull down the slide (if On is selected in Settings  
> General > Active slide lock).  
To use the light sensor  
• In Settings > Display > Light sensor, select On.  
The phone will adjust backlight level automatically  
according to ambient brightness. For power-saving  
purposes, always turn on the light sensor.  
Power-saving mode  
After the set time span, the phone has the idle  
screen turned off automatically. To exit the power-  
saving mode, press any key. For power-saving  
purpose, set the time span to a low value in Settings  
> Display > Backlight duration.  
4
 
 
Table of contents  
Add or edit contacts ..................................... 25  
1. Getting Started ..................................7  
Search for a contact ...................................... 26  
Manage your contacts ................................... 26  
Share contact information with others...... 27  
Special numbers ............................................. 27  
Insert the SIM card ...........................................7  
Charge the battery ..........................................8  
Set clock...............................................................9  
Insert Micro-SD card (memory card) ........ 10  
6. Tools ..................................................28  
2. Text Entry ........................................11  
Use your business organizer  
On-screen text entry .................................... 11  
Keypad text entry........................................... 12  
Create your to-do list .........................................28  
Check your calendar............................................28  
Edit your to-do list...............................................28  
Delete expired tasks............................................29  
Use your memo  
Display a text memo on the idle screen .........29  
Record a sound memo........................................29  
Use your clock and timer  
3. Calling ................................................14  
Make a call ....................................................... 14  
Answer and end a call ................................... 14  
Options during a call ..................................... 15  
Handle multiple calls .................................... 15  
(network-dependent)  
Alarm ......................................................................30  
World clock...........................................................31  
Stopwatch...............................................................31  
Make an emergency call ............................... 16  
4. Messaging ..........................................18  
Use your file reader  
Create messages ............................................ 18  
Organize your messages................................ 19  
Define your message settings ...................... 20  
Email .................................................................. 22  
Broadcast messages........................................ 24  
Text reader............................................................31  
Document reader.................................................32  
Use the torch ................................................. 32  
Use your business assistant  
Business card reader............................................33  
Firewall ...................................................................33  
5. Contacts ...........................................25  
5
 
Calculator...............................................................33  
Currency converter.............................................33  
E-dictionary ...........................................................33  
13. Bluetooth ....................................... 49  
About Bluetooth ............................................ 49  
Connect to a Bluetooth device .................. 49  
Get connected by a Bluetooth device ...... 50  
Edit your device list........................................ 50  
7. Browser ............................................34  
Manage your browser ...................................34  
Access web sites ............................................34  
Enable/disable push messages.......................34  
STK.....................................................................34  
14. Profiles ............................................ 51  
Adjust ring settings to different scenes .... 51  
15. Settings ........................................... 52  
8. Camera .............................................35  
General.............................................................. 52  
Display............................................................... 54  
Sounds .............................................................. 54  
Connectivity .................................................... 55  
Motion sensor.................................................. 55  
Camera..............................................................35  
Video recorder................................................37  
9. Fun .....................................................38  
Java .....................................................................38  
Sensor games....................................................39  
Icons & symbols .................................. 56  
Precautions .......................................... 57  
Tips.......................................................... 62  
Troubleshooting ................................. 63  
Philips Authentic Accessories .......... 65  
Trademark Declaration ..................... 67  
Specific Absorption Rate  
10. Music ...............................................40  
Music player......................................................40  
FM radio ...........................................................42  
11. My files ............................................45  
Find your files ..................................................45  
Manage your files ...........................................45  
Share your files ...............................................46  
Use your files ...................................................46  
Information .......................................... 68  
Limited warranty ................................ 70  
Declaration of conformity ................ 73  
12. Calls .................................................47  
Call history ......................................................47  
Call options .....................................................47  
6
 
2. As shown, take out the battery.  
1. Getting Started  
Please read the safety instructions in the  
“Precautions” section before using your phone.  
To use your phone, you must insert a valid SIM card  
supplied by your network operator or retailer. The  
SIM card contains your subscription information,  
your mobile phone number and a memory in which  
you can store phone numbers and messages.  
Insert the SIM card  
Follow the steps below to insert your new SIM  
cards. Remember to switch off your mobile phone  
before removing the back cover.  
1. Press on the back cover and slide the cover as  
shown.  
You may lose all your personal settings if you  
remove the battery when the phone is switched  
on.  
3. As shown, align your SIM card with the SIM  
card slot, clipped corner against you and gold  
contact downwards. Insert your SIM card  
under the metal clip holder.  
Getting Started  
7
 
 
4. As shown, align the metallic connectors on the  
battery and battery slot. Insert the battery  
until it is locked.  
Charge the battery  
Your phone is powered by a rechargeable battery.  
A new battery is partially charged. The battery  
symbol indicates the state of the battery. To charge  
the battery, plug in the connector as shown below.  
Then plug the other end into a power socket.  
5. As shown, insert the back cover from the  
bottom. Push the cover until it is locked.  
During charging, the battery symbol scrolls.  
Keeping the charger plugged to the mobile  
phone when the battery is fully charged will not  
damage the battery. The only way to turn off  
the charger is to unplug it, so it is advisable to  
use an easily accessible power socket.  
If you do not intend to use your phone for  
several days, we recommend that you remove  
the battery.  
Remove the protective film covering the screen  
before using the phone.  
8
Getting Started  
 
press on + or - until you reach the desired  
digits.  
3. To select how to display the time, go to  
Settings > General > Time & date > Display time:  
Analog clock: Tap to show the time in a clock.  
You can use the phone while it is charging. If  
the battery is completely flat, the battery  
symbol will only reappear after a few minutes  
of charging.  
Digital clock: Tap to show the time in digits  
Tap OK to confirm.  
.
Set clock  
1. Check that your phone is switched on.  
Long press ) if necessary. Enter the PIN  
code if required. A PIN code is a 4- to 8-digit  
secret code of your SIM card. It is  
preconfigured and communicated to you by  
your network operator or retailer.  
Display local and international clocks  
You can display two clocks on the idle screen, one  
showing your local time and one the time of your  
destination.  
1. Check that you have set your local time and  
date.  
2. Go to Tools > World clock.  
If you enter an incorrect PIN code three times  
in succession, your SIM card will be blocked. To  
unblock it, you must request the PUK code from  
your operator.  
Local setting/Foreign setting: Tap  
<
or repeatedly  
>
to select a city. If necessary, tap Options to turn  
Daylight saving/Daylight saving for foreign city on  
or off.  
2. On idle screen, tap on Menu and go to Settings  
> General > Time & date.  
Set format: Select the time (12-hour or 24-hour  
clock) and date format by pressing the  
navigation keys  
<,  
>,  
+,  
-,  
and OK.  
Set time/date: Enter the time and date.  
Tap on the box to be defined. To enter your  
desired digits, tap + or -repeatedly, or long  
Getting Started  
9
 
   
Insert Micro-SD card (memory  
card)  
You can expand the memory of your phone by  
adding a micro-SD card.  
Supported capacity: up to 8 GB  
1. Follow Step 1 under "Insert the SIM card".  
2. As shown, align your micro-SD card with the  
slot. Push it into the slot until it is secure.  
To remove the micro-SD card, press the card  
to release it.  
3. Follow Step 5 under "Insert the SIM card".  
4. If necessary, turn off your phone, and turn it on  
again.  
10  
Getting Started  
 
 
2. Tap on the keys to enter your desired letters,  
numbers, or strokes.  
2. Text entry  
Your mobile phone supports the text entry  
through the screen, or the alphanumeric keypad.  
Push down or up the slide to switch between the  
two entry modes.  
: Tap to move to the beginning of the next  
line.  
: Tap to enter a space.  
: Tap to enter symbols and punctuations.  
: Tap to switch between upper and lower  
cases (for English entry).  
On-screen text entry  
Using the supplied stylus (for the  
handwriting recognition mode)  
1. Tap to select  
Select text entry modes  
1. On the editing screen, push down the slide, if  
necessary, to select the entry through the  
screen.  
: for English entry  
: for numeric entry  
2. Tap to select  
: for the entry of Simplified Chinese  
: for the entry of Traditional Chinese  
2. Write on the screen using the supplied stylus,  
as you do on paper using a pen.  
: Tap to move to the beginning of the next  
line.  
:
text entry through the on-screen  
keypad  
: text entry through the supplied stylus  
Enter text  
Using the on-screen keypad  
1. Tap to select  
: Tap to enter a space.  
: Tap to enter symbols and punctuations.  
/
: for English entry  
: for numeric entry  
: Pinyin input for Simplified Chinese  
Depending on the language you select for your  
phone, the supported input methods may vary.  
/
: Stroke input for Simplified/  
Traditional Chinese  
Text entry  
11  
 
 
Enter text  
Keypad text entry  
1. Select your desired text entry methods.  
2. Enter text by using the alphanumeric keypad.  
2 to 9 To input letters (T9 input)  
Press repeatedly to input the desired  
letter (multi-tap input)  
With the alphanumeric keypad, you can use a  
number of text entry methods, including T9 input,  
multi-tap input, numeric input and symbol input.  
Select text entry methods  
1. On the editing screen, push up the slide, if  
necessary, to select the entry through the  
alphanumeric keypad.  
1 to 6 To enter strokes (stroke input)  
<,>  
To browse candidate  
words (T9 input/multi-tap input)  
To browse the candidate words on the  
previous/next page (T9 input/multi-tap  
input)  
2. During text editing, press # repeatedly to  
+
,
-
select your desired inputs:  
/
/
: for English entry  
: for numeric entry  
Select  
To confirm the selection  
To input a space  
: Pinyin input for Simplified Chinese  
0
/
: Stroke input for Simplified/  
R
Clear Short press to clear a letter,  
long press to clear all entries.  
If necessary, press R to exit the  
input mode first.  
Traditional Chinese  
3. Long press * to switch the T9 English input  
on or off.  
4. To enter a symbol and punctuations, press *.  
The text editor remembers the last input method  
you have used before you exit the editing screen.  
When you access the editor again, it will  
automatically select the last input method you have  
used.  
®
T9 input  
T9® predictive text input is an  
intelligent editing mode for messages,  
which includes  
a
comprehensive  
Tegic Euro. Pat.  
App. 0842463  
dictionary. It allows you to quickly  
enter text. You need to press only  
once on the key corresponding to  
Depending on the language you select for your  
phone, the supported input methods may vary.  
12  
Text entry  
 
each letter needed to spell a word: keystrokes  
input are analyzed and the word suggested by T9®  
is displayed at the pop-up window.  
desired character. The stroke input method in this  
phone classifies a Chinese character into 5 basic  
strokes: (horizontal, vertical, left falling stroke,  
right falling stroke and over-down) as well as a  
special stroke. When the stroke you need does not  
correspond to the 5 basic strokes, replace it with  
the special stroke (?).  
Examples: how to enter the word "home":  
1. Press  
4,  
6,  
6,  
3. The screen displays the  
first word of a list: Good.  
2. Press  
3. Press  
>
,
to scroll and select Home.  
Select to confirm.  
Multi-tap input (ABC/Abc/abc)  
Press the keys that are marked with the  
corresponding letter you wish to enter. Press once  
to get the first letter on the key, press twice quickly  
to get the second letter and so on until the letter  
you want is displayed on the screen.  
Example: how to enter the word "home":  
Press  
4
(DEF).  
,
4
(GHI)  
6,  
6,  
6
(MNO),  
6
(MNO),  
3
,
3
Stroke input  
The principle of stroke input is to dissect and  
separate every stroke of a Chinese character  
according to sequence. When you wish to input the  
character, press the keys corresponding to the  
required strokes according to sequence to get the  
Text entry  
13  
 
Speed dial  
3. Calling  
On the idle screen, you can call a preset speed-dial  
Make a call  
number by long pressing a numeric key.  
From idle screen  
Set your speed-dial number before dialing it.  
1. Enter the phone number using the  
alphanumeric keypad. If necessary, push up the  
slide first.  
To assign a speed-dial key to a contact:  
1. Go to Menu > Settings > General > Speed dial.  
2. Select one of the locations (2 to 9).  
3. In Contacts, assign to the location a contact  
from your phonebook.  
2. Press  
3. Press  
(
)
to dial the number.  
to hang up.  
For international calls, long press 0 to enter  
In Phone number, assign to the location a  
preset phone number.  
the "+" sign for the international prefix.  
Using the phonebook (see "Contacts" on  
page 25)  
Answer and end a call  
1. Go to Contacts > View contacts to open the  
When receiving a call, the number of the caller may  
be displayed, depending on whether or not the  
calling party has chosen to display his or her ID. If  
the number is stored in the phonebook, then the  
corresponding name is displayed.  
contacts list.  
To search for a contact, enter the contact  
name (up to  
5
characters) using the  
alphanumeric keypad, or select a contact from  
the list.  
Answer the call: Press  
you set Active slide to On under Menu > Settings  
General  
End the call: Press ), or push down the slide.  
(, or push up the slide if  
2. Press  
(
to dial the selected number.  
>
For IP calls (China only), select  
L
Options  
>
.
IP call.  
You can preset your IP service number under  
Calls > Call options > IP dial.  
To answer or end a call using the supplied  
one-key headset, see "Headset" on page 65.  
3. Press  
)
to hang up.  
14  
Calling  
 
 
To reject calls from certain contacts, you can  
add the contacts or numbers to your blacklist. (For  
more information about the blacklist, see "Firewall"  
on page 33).  
In most countries, recording of telephone  
conversation is subject to legislation. We advise  
you to notify the caller if you intend to record  
the conversation and only do so if they agree.  
You should also ensure confidentiality of the  
recordings.  
The phone will not ring or vibrate if it is in Silent  
mode (see "Profiles" on page 51 ).  
To record a conversation during a call, select  
LOptions and select Sound recorder. Recorded  
sound is saved in *.amr format and stored in Audio  
of My files menu. (see "Find your files" on page 45).  
Options during a call  
During a call, you can tap to select H-Free or H-Held  
mode. Tap on Options to access the following  
options:  
Mute or unmute a call  
During a call, select Options and set the Mute function  
to On/Off. If you select Mute, the microphone will be  
deactivated.  
- Hold single call: Put current call on hold.  
- End single call: End current call.  
- Sound recorder: Record conversation during a  
call.  
- Mute: Mute/unmute the call.  
- New call: Make another call.  
- Message center: Send and receive messages.  
- Calendar: Check your calendar (see "Check  
your calendar" on page 28) during a call.  
- Quick note: Edit a text memo to be shown on  
the idle screen.  
- Calculator: Use the calculator (see  
"Calculator" on page 33) during a call.  
- DTMF: Enable the touch tone dialing system.  
Adjust the volume  
During a call, press the + or - navigations keys to  
increase or decrease the volume.  
Handle multiple calls (network-  
dependent)  
You can handle two or more calls at the same time,  
as well as make conference calls with your phone.  
The availability of this feature is dependent on your  
network operator and/or your subscription.  
Calling  
15  
 
- Calendar to check your calendar (see "Check  
your calendar" on page 28) during a call.  
- Quick note to edit a text memo to be shown  
on the idle screen.  
- Calculator to use the calculator (see  
"Calculator" on page 33) during a call.  
- DTMF: Enable the touch tone dialing system.  
Make a second call  
You can make a second call when there is an active  
call or with a call on hold. While on the phone, dial  
the number (or select  
phonebook) and press  
hold and the second number is dialed. When the  
second call is received, you can tap on Swap to  
toggle between 2 calls, or select Options to access  
the following options:  
a
contact from the  
(
. The first call is put on  
Answer a second call  
When you receive a second call while already in  
communication, the phone will emit a beep tone  
and the screen displays information about the  
incoming call. You can then:  
- H-Free to receive the call in handsfree or  
handheld way.  
- Conference to introduce the party into a  
conference call.  
- Transfer to connect the two calls. You are  
disconnected when the transfer is  
completed.  
- End single call to disconnect one party from  
the call.  
Press  
(
To answer the call (the first one  
is put on hold).  
Press  
R
or To reject the call.  
)
- End all calls to disconnect all parties from the  
call.  
- Sound recorder: Record conversation during a  
call.  
To receive  
a
second call, you must first  
deactivate Call divert (see 48)and activate Call  
waiting (see 48).  
- Mute: Mute/unmute the call.  
- New call to make another call.  
- Message center to send or receive messages  
Make an emergency call  
Without a SIM card in phone, you can pressRSOS  
to make the emergency call.  
16  
Calling  
 
 
With a SIM card in phone, you can enter the  
emergency number in the idle mode, then press  
(
.
In Europe, the standard emergency number is  
112, in the UK, it is 999.  
Calling  
17  
 
3. Tap on Send to send the message to the  
desired contact or contact group ( "Contacts"  
on page 25).  
4. Messaging  
MMS  
Your mobile phone can also send and receive MMS  
(Multimedia Messaging Service) messages. With  
MMS, you can send messages that contain pictures,  
sound and text.  
When sending MMS messages, make sure that your  
recipient also has an MMS-enabled phone in order  
to view your messages. Follow the steps described  
below to compose and send an MMS.  
1. Select Create Message > MMS, and enter the  
following:  
Create message  
SMS  
SMS enables you to send text messages to the  
other party, using Short Messaging Service (SMS).  
You can use the SMS menu to send messages to  
another handphone or a device that is capable of  
receiving SMS messages. To compose and send an  
SMS message, follow the steps below:  
1. Select Create message > SMS, and write your  
message.  
To  
Enter the number or e-mail of the  
recipient.  
2. Tap on Options to access the following options:  
Cc  
Enter the number or e-mail of other  
recipients to whom you wish to send a  
copy of the message.  
Save as  
Draft: Save the SMS message to  
Drafts.  
Template: Save the SMS message as  
an SMS template.  
Insert contact Select to insert the name and  
phone number of your contacts.  
Use templates Select to insert a preset message.  
Exit editor  
Exit the editing screen.  
18  
Messaging  
 
   
Add  
bookmark  
text  
Add website information you saved  
as a bookmark ( "Access web sites"  
on page 34)  
Bcc  
Enter the number or e-mail of the recipients  
to whom you wish to send a copy of the  
message, by which the recipients in the  
Bcc list will be invisible to other  
recipients.  
3. Tap on Done to access the next option:  
Send only Send the MMS message only.  
Subject Enter the subject of the MMS.  
Save and send Save and Send the MMS message.  
2. In Edit content, tap on Options to select your  
options. Tap on Done to finish editing.  
Add picture, Insert a slide into your message.  
Save to Drafts Save the MMS message to Drafts.  
Send options Set Validity period, Delivery  
report, Read report, Priority.  
Add audio,  
Add video  
The multimedia slide can consist of  
a picture and an audio file, or a  
video clip.  
Exit  
Exit  
Use templates for messages  
You can use ready-made messages as new  
messages. 10 SMS and 5 MMS messages are preset  
in the Templates folder.  
Add slide  
before, Add message.  
slide after  
Insert more slides into your  
1. Select Templates > SMS or MMS.  
2. Select your desired templates.  
3. Tap on Options, and select Write message.  
The ready-made messages appear on the edit  
screen.  
Slide timing Set the play time of MMS slides.  
The default value is 5 seconds.  
Preview  
Preview current MMS message.  
Tap on < and > to move to  
previous or next page.  
Organize your messages  
Your messages are sorted in the following folders  
on your phone memory and SIM card:  
Add  
attachment  
Insert a file (txt, jar etc) to your  
message.  
Messaging  
19  
 
Inbox: received messages  
Sent: sent messages  
Outbox: unsuccessfully sent messages  
Drafts: messages saved as drafts  
SIM Archive: messages saved in the SIM card  
Spam box: rejected or filtered messages  
Move to  
SIM  
Move the selected message to your  
SIM card.  
Use details, Extract the number or E-mail address  
Use  
number,  
Use URL  
of the sender or in the message to  
create messages, make a call, or save  
to the phonebook.  
Extract the URL in the message to  
connect to the website, or add as a  
bookmark.  
Find a message  
• Enter a folder, and press + or - to select a  
message.  
Manage messages  
Edit before Edit the sender’s phone number  
calling before making a call  
Press LOptions to access the following options:  
For the SMS or MMS, or different folders,  
available options may vary.  
Delete all Delete all messages in the folder.  
Properties Show the file information of current  
message.  
Reply  
Reply to the sender.  
Save object Save to your phone or memory card  
(if inserted) the picture, audio, video,  
or other attached file of current MMS  
message.  
Reply by  
SMS  
Reply to the MMS sender by SMS.  
Reply all  
Reply to the sender and all recipients  
on the Cc and Bcc lists.  
Define your message settings  
Forward  
Edit  
Forward the selected message.  
Edit and send the selected message.  
Delete the selected message.  
Some of your message settings are dependent on  
the service you subscribe with the network  
operator. Consult your network operator for your  
account settings, general settings, server profile, or  
Delete  
20  
Messaging  
 
 
other relevant settings.  
In Messaging > Settings > SMS,  
General  
settings  
Delivery report: When set to On,  
this option will inform you via SMS  
whether or not your own SMS was  
received.  
Account  
settings  
Profile name: Edit the name of the  
current profile.  
SC address: Select your default SMS  
center. If not available on your SIM  
card, you must enter your SMS  
center number.  
Validity period: Select the length of  
time your messages will be stored  
in the SMS centre. This is useful  
when the recipient is not  
connected to the network (and  
thus cannot receive your message  
immediately).  
This feature is subscription  
dependent.  
Reply path: When On, this option  
allows you to transmit the number  
of your SMS message center  
together with the message. The  
recipient can then reply using your  
SMS center and not theirs. This  
speeds up the rate of transmission.  
This feature is subscription  
dependent.  
This feature is subscription  
dependent.  
Auto save SMS: Press , to select On  
or Off.  
On: The message is sent and saved  
to the Sent folder.  
Off: The message is sent only.  
Message type: Select the format of  
your sent messages. This option is  
network dependent.  
Messaging  
21  
 
Server  
profile  
Set network configuration. Please  
contact your network provider for  
more information.  
Memory  
status  
This option can display the  
memory status of the messages  
saved in the SIM card and the  
phone.  
Memory  
status  
View the memory status of your MMS.  
Pref. bearer  
This option allows you to set the  
preferred transmission mode. You  
can select Prefer GPRS, Prefer GSM  
or GSM only. For further details,  
please contact your network  
operator.  
E-mail  
To send and receive E-mail, you need to  
subscribe relevant services. Contact the  
operator for the subscription and configuration  
information.  
In Messaging > Settings > MMS,  
Compose  
Set Creation mode, Picture resizing,  
Best page time, Auto signature and  
Signature.  
This menu allows you to send E-mail to one or  
several recipients at a time, including with an  
attachment such as a JPEG picture. Once received,  
your messages can be forwarded and the  
attachments can be visualized with the appropriate  
software.  
Send  
Set Validity period, Delivery report,  
Read report, Priority, Slide timing and  
Delivery time options for sending an  
MMS message.  
Set up E-mail profiles  
Retrieve  
Filter  
Set Home network, Roaming, Read  
report and Delivery report options for  
receiving an MMS message.  
Select E-mail > E-mail accounts.This menu allows  
you to create new E-mail accounts and select one  
to activate it. Consult the network operator for the  
account information. If necessary, consult your  
mail service provider for the mail server  
configuration.  
Set Anonymous and Advertisement  
from whom you want to filter MMS  
or e-mail messages.  
22  
Messaging  
 
1. Go to E-mail > E-mail accounts. Tap on Options,  
and select New account.  
2. Enter your account information as prompted.  
- When entering symbols like @ and _, tap on  
to turn on/ off the symbol input  
keypad.  
To receive E-mail automatically  
1. Go to E-mail > E-mail accounts. Tap to select  
your desired account.  
2. Tap on Options, and select Edit > Advance.  
3. In Account settings > Check interval, tap <, > to  
select your desired time span.  
- When selecting data account, tap on Edit and  
select GPRS data. Check that you have  
selected a GPRS Internet/Email connection  
account.  
- Consult your mail service provider for the  
mail server configuration.  
Your mail box will be checked automatically  
after each time span.  
Organize your E-mail  
For your activated account, the Email is sorted in  
the following folders:  
3. When returning to the list of E-mail accounts,  
tap on Activate to activate the selected E-mail  
account.  
Inbox: received E-mail  
Outbox: unsuccessfully sent E-mail  
Sent: sent E-mail  
Drafts: Email saved as drafts  
Write E-mail  
To write E-mail, select E-mail > Write Email. Enter  
the address (To), a copy (Cc), a blind copy (Bcc),  
Subject and Attachment, and the e-mail content.  
When you have finished writing your E-mail, press  
Done. You can then select to Send, Send and save,  
Save to draft or Quit without Saving.  
1. Go to E-mail > E-mail accounts. Tap to select  
your desired account. Tap on Activate to  
activate the E-mail account.  
2. Enter a folder and select a desired message.  
Tap on Options to access the following options:  
For different folders, available options may  
vary.  
Send and receive E-mail  
Select E-mail > Send and receive.This menu allows  
you to send E-mail from your phone to the  
Internet, and receive E-mail from the Internet to  
the mailbox you have preset on your phone.  
Messaging  
23  
 
 
Reply  
Reply to the senders.  
Delete  
Delete current E-mail.  
Reply without Reply to the sender without the  
Broadcast message  
content  
email history.  
Broadcast messages are public messages broadcast  
to a group of mobile users. The messages are  
broadcast on coded channels. Generally, one  
broadcast channel can transmit one type of  
message. Please contact your network operator for  
a list of channel numbers and their respective  
broadcast information.  
Reply all  
Reply to all senders.  
Reply all  
without  
content  
Reply to all senders without the  
email history.  
Forward  
Forward the downloaded E-mail to  
someone else.  
Define settings for broadcast messages  
Retrieve  
options  
Retrieve the complete mail.  
This option is available when you  
select Incoming server > Download  
options > Header only in Edit >  
Advance (See Step 1 and 2 in "To  
receive E-mail automatically" on  
page 23).  
In Broadcast messages,  
Receive  
mode  
Tap to turn the receive mode  
on or off.  
Read  
message  
Read messages when there are  
received broadcast messages.  
Languages Set language for the broadcast  
Mark as  
unread  
Displays current E-mail as read.  
message to be received.  
Channel  
settings  
Define the channel for  
broadcast messages.  
Mark as  
deleted  
Displays current E-mail as deleted.  
To delete the all the mail marked as  
deleted, go to Email  
>
Delete  
marked Emails.  
24  
Messaging  
 
2. On the idle screen, push up the slide, if  
necessary, and enter the phone number you  
wish to save. Tap on Options > Save:  
5. Contacts  
Name: Tap on Edit to go to the editing screen.  
Select your desired text entry methods (see  
"Text entry" on Page 11). Press R to exit the  
input mode, if necessary. Tap on Done to finish  
editing.  
Contacts are stored in one of the two available  
phonebooks: SIM phonebook (located on your SIM  
card, by which the number of entries you can store  
depends on the card capacity) or the Smart  
Phonebook (located on your phone, which allows  
you to store up to 1000 names). New contacts will  
only be added to the phonebook you have selected.  
Number: Enter the mobile number.  
3. Add details as desired in other fields.  
When selecting the contact picture, ringtone  
or caller group, press < or > (To use a photo  
as contact picture, see "To use a picture file as  
contact picture or wallpaper" on Page 46).  
4. Tap on Done to save.  
Add or edit contacts  
Add a contact to Smart phonebook  
For contacts on the Smart Phonebook, you can add  
detailed information, like home number, office  
number, and identifying features, like contact  
pictures and ringtones.  
Add a contact to SIM phonebook  
1. Go to Contacts > Advanced > Choose contacts  
list > Preferred storage. Select SIM.  
2. Follow Step 2 under "Add a contact to Smart  
phonebook".  
1. Go to Contacts > Advanced:  
In Choose contacts list > Preferred storage, select  
Phone;  
In Contact details, select the items to be  
defined for the new contact.  
Edit a contact  
1. Go to Contacts > View contacts.  
2. Select your desired contact (see "Search for a  
contact").  
3. Tap on Options > Edit to edit the name and  
phone number.  
Contacts  
25  
 
       
Copy, move or delete multiple contacts  
1. Go to Contacts > View contacts.  
2. Tap on Options > Select multiple > Copy to  
phone/SIM, Move to phone/SIM, or Delete  
selected contacts.  
3. Select Select all or Select one by one to display a  
fully checked or unchecked contacts list.  
4. Tap to check or uncheck your selection.  
5. Tap on Done to confirm.  
Search for a contact  
1. Go to Contacts > Advanced > Choose contacts  
list > Default contact list. Select your desired  
phonebook.  
2. Go to Contact > View contacts.  
3. To search for a contact, enter the contact  
name (up to 5 characters) in the text box.  
To enter text, tap on  
to display the on-  
screen keypad. To select the text entry  
methods, tap on the language or numeric icon  
next to the text box.  
Copy, move or delete all contacts  
1. Go to Contacts > Advanced.  
2. Select Copy to SIM/phone, Move to SIM/Phone,  
or Delete all contacts.  
Manage your contacts  
You can copy or move your contacts between the  
two phonebooks. Also, you can group your  
contacts as Family, Friends, Business and others as  
you like. For different groups, you can use different  
ringtones and contact pictures for identification,  
and send messages to a group.  
Group your contacts on the Smart  
phonebook  
1. Go to Contacts > View groups.  
2. Select a group. You can rename the group,  
select a ringtone and a contact picture, and  
add contacts to Member list.  
To add multiple contacts to a group,  
you can also go to Contacts > View contacts. Tap on  
Options, and select Select multiple > Add to group.  
Copy, move or delete a contact  
1. Go to Contacts > View contacts.  
2. Select a desired contact (see "Search for a  
contact").  
3. Tap on Options to select Delete, Copy to phone/  
SIM, or Move to phone/SIM.  
26  
Contacts  
 
   
Share contact information with  
others  
You can share with others the contact information  
in your phonebook. As desired, the information can  
be sent via the SMS, MMS, E-mail or Bluetooth.  
1. In Contacts > View contacts, select your desired  
contact ("Search for a contact").  
2. Tap on Options > Send vCard to send the  
contact information via the SMS, MMS, E-mail  
or Bluetooth.  
Service  
numbers  
This service is provided by your  
network operator. For more  
information  
regarding  
the  
corresponding function, please  
contact your network operator.  
Voice mail  
Emergency  
This menu allows you to set your  
voice mail server number, as well as  
retrieve your voice mails. Consult  
the network operator for the  
account information.  
Select a voice mail box, and tap on  
Edit: Edit voice mail server number.  
Connect: Retrieve your voice mail.  
Special numbers  
Go to Contacts > Special numbers.This menu allows  
you to keep a list of useful numbers such as own  
numbers, service numbers, and emergency  
numbers.  
Tap on Edit to edit your emergency  
phone number.  
Options  
Description  
My  
numbers  
Tap on Edit to edit the phone  
number or name to be shown on  
the idle screen.  
To show the number or name on  
the idle screen, select On in Settings  
> Display > Show own number.  
Contacts  
27  
 
6. Tools  
Repeat  
Press < or > once or more to repeat  
the alarm at the specified time once,  
everyday, weekly or monthly.  
To repeat the alarm at certain days,  
press < or > to select Days, tap on a  
weekday or weekend, and then On/Off  
to select or unselect the day.  
Use your business organizer  
You can add your new tasks to the phone. Such to-  
do tasks are marked in your calender. You can  
always check your calendar and remind yourself as  
desired.  
3. Tap on Done to save the task.  
At the set time, the task note appears as a new  
event on the idle screen.  
Create your to-do list  
Check your calendar  
1. In Tools > Calendar, select a date in the  
calendar, and tap on Options > Add event to add  
a kind of task.  
After creating your to-do lists, you can check your  
calendar in day, weekly, or monthly views. In Tools  
> Calendar, tap on Options or View task.  
2. To keep yourself reminded, do the following:  
You can also create your to-do list in the calendar  
of different views.  
Note  
Add a note about the task.  
Tap on Edit to edit the task. On the  
editing screen, tap on Template to use  
the preset note.  
Edit your to-do list  
1. In Tools > Calendar, tap on Options > View all to  
enter the task list.  
Alarm  
Press < or > once or more to turn the  
alarm on, have it sound 5,15 or 30  
minutes before the specified time, or  
turn the alarm off.  
2. Select your desired task. Tap on Options to do  
the following:  
View  
View the details of the selected  
task.  
28  
Tools  
 
   
Record a sound memo  
Add  
Add a task.  
You can make your own recording, and share it  
with your friends via the MMS, E-mail, or  
Bluetooth. Also, you can use the recording as the  
ringtone of incoming calls or a contact.  
Edit  
Edit the selected task.  
Delete the selected task.  
Delete all the tasks.  
Send the task as a message.  
Delete  
Delete all  
Make recording  
Send  
vCalendar  
1. Go to Tools > Sound recorder.  
2. Tap on Record or Options > Record to start  
recording.  
3. Tap on Stop to stop recording.  
A file name is generated.  
4. Edit the file name as desired.  
Select your desired text entry methods (see  
"Text entry" on page 11). Press R to exit the  
input mode, if necessary.  
The recording file is saved.  
Append recording to a file  
1. Select the desired file.  
2. Tap on Options > Append.  
The new recording is added to the file.  
Edit recording files  
Delete expired tasks  
You can quickly delete all tasks before current date  
and time.  
In Tools > Calendar, tap on Options > Delete expired  
tasks.  
Use your memo  
You can use this phone to record your text or  
sound memos.  
Display a text memo on the idle screen  
1. In Tools > Quick note, enter your memo.  
Select your desired text entry methods (see  
"Text entry" on page 11). Press R to exit the  
input mode, if necessary.  
1. Select the desired file.  
2. Tap on Options to select Rename, Delete, or  
Delete all files.  
Send an audio file  
1. Select the desired file.  
2. Tap on Done to finish editing.  
On the idle screen, you will see the text  
memo.  
Tools  
29  
 
2. Tap on Options > Send to send the audio file via  
the MMS, E-mail, or Bluetooth.  
Set your recording as a ringtone  
1. Select the desired file.  
2. Tap on Options > Set as ringtone.  
The recording is added to your ringtone file list.  
The ringtone of your incoming calls is changed  
to the recording. To change the ringtone, see  
"Sounds" on page 54. To use the ringtone for  
contacts, see "Add or edit contacts" on page 25 or  
see "Group your contacts on the Smart  
phonebook" on page 26.  
the weekdays or weekends. To repeat the  
alarm at certain days, press < or > to select  
Days, tap on a weekday or weekend, and then  
On/Off to select or unselect the day.  
Alarm tone: Tap to select an alarm tone.  
Snooze: Select Off, or an alarm interval: 5, 10,  
or 20 minutes.  
4. Tap on Done when you finish setting the alarm.  
5. To turn off an alarm, tap on an alarm, and then  
Off.  
To use an alarm  
On the set alarm time, your alarm sounds.  
Select Stop: The alarm stops. If you have selected  
repeat mode for the alarm (see “To set an alarm”),  
it will sound again at the set time.  
Select Snooze: The alarm will sound again after the  
set Snooze interval.  
To mute the sounding alarm, you can also turn  
over the phone (front side to the back, back side to  
the front, see "To use the motion sensor" on page  
4).  
Use your clock and timer  
Alarm  
You can set up to five alarms.  
To set an alarm  
1. Check that your clock is correctly set (see  
"Set clock" on page 9).  
2. Go to Tools > Alarm.  
The screen of alarm list appears.  
3. Select an alarm, and tap on Edit to enter the  
alarm setting screen.  
The alarm clock will ring even if your mobile  
phone is switched off, or the Profiles is set to  
Meeting or Silent.  
Set time: Set the alarm time.  
Repeat: Repeat the alarm once or on some of  
30  
Tools  
 
   
World clock  
Use your file reader  
You can display two clocks on the idle screen, one  
showing your local time and one the time of your  
destination.  
Text reader  
This menu allows you to view the text file (.txt file)  
saved in your phone or the memory card. To view  
a file through the text reader,  
1. Check that you have set your local time and  
date.  
2. Go to Tools > World clock.  
1. Copy and save the file to My files > Phone or  
Memory card > Others > Ebook.  
2. Go to Tools > Text reader. Tap on Select or  
Options > Global settings > Select storage to  
select the file location: phone or memory  
card, if you have inserted a memory card into  
your phone.  
Local setting/Foreign setting: Tap  
<
or  
>
repeatedly to select a city. If necessary, tap  
Options to turn Daylight saving/Daylight saving for  
foreign city on or off.  
Switch local/foreign: Tap to switch between  
local and foreign clock.  
Existing files are listed. To display the files as  
desired, tap on Options > Sort by.  
3. To display a file correctly, select your desired  
file, and tap on Options > Global settings >  
Encoding. Select the encoding suitable to your  
language.  
Alarms, reminders, programmed events are  
time zone independent! If you set an alarm or  
an event at 9:00 AM in time zone A, it will still  
ring or be due at 9:00 AM if you change to time  
zone B.  
Stopwatch  
To search for information when viewing a file  
You search for specific words, marked information,  
or different parts of the file. After opening the file,  
tap on Options to select:  
Use the stopwatch for your timing needs.  
In Tools  
>
Stopwatch,  
Tap on Start to start timing.  
Tap on Pause/Continue to pause or resume.  
Tap on Restart to reset the timer.  
Tap on Back to exit.  
Find: Find specific words in the file.  
Tools  
31  
 
Go to bookmark: Go to the marked information.  
To do so, add a bookmark where desired by  
tapping Options > Add bookmark.  
drag the document.  
To go to a certain page, tap on Options and  
select:  
Jump to: Go to the beginning, middle, or end of  
the file. To skip a certain percentage of the file,  
select Input percentage and tap on Edit to enter  
your desired percentage number.  
Next page  
Move to the next page.  
Previous  
page  
Move to the previous page.  
To clear the files created by the system  
during E-book reading  
Tap on Options > Clean up bookshelf.  
Goto page  
Enter the number of the page you  
wish to read.  
To search for information when viewing a file  
Tap on Options and select:  
Documents reader  
This menu allows you to view the files in .txt, .pdf,  
.doc, .ppt and . xls formats. To view a file through  
the document reader,  
Find  
Search for specific words in the  
document. The matched words are  
marked in color.  
1. Copy and save the file to My files > Others in  
the phone or micro SD card.  
Find next  
Move to the next match.  
2. Go to Tools > Documents reader menu. Tap on  
Select or Options > Select storage to select the  
file location, phone or memory card.  
Existing files are listed. To display the files as  
desired, tap on Options > Sort by.  
3. Select your desired file, and tap on Open.  
4. To zoom in or out, tap on Options > Zoom in  
or Zoom out.  
Use the torch  
On the back of the phone, a torch function is  
equipped, which you can also use as the flash for  
camera. To turn on the torch,  
• Select Tools > Torch. Tap on On.  
To turn on the torch from idle screen, include  
Torch in the shortcut menu (see "Shortcut menu"  
on page 2).  
To move to  
a
certain portion of the  
document, use the stylus or your finger tip to  
32  
Tools  
 
2. Tap on Options, and select Add to blacklist.  
Use your business assistant  
Calculator  
Business card reader  
Enter figures and operation symbols by using the  
the on-screen numeric keypad.  
This menu allows you to collect the business cards  
information by directly scanning the business card  
contents into Contacts.  
Currency converter  
Convert between different currencies based on  
exchange rates.  
1. In Tools  
>
Business card reader,  
Adjust the focus: press and hold the camera  
key. Adjust the distance between the lens and  
business card: in the viewing frame, the  
business card shall be clear and recognizable.  
The screen turns black. The recognition starts  
until the recognition result is displayed.  
1. In Tools  
>
Currency converter, enter your  
exchange rate in Rate. Tap on Done to  
confirm.  
2. Enter the sum of money in Local. Tap on Done.  
You will get the result in Foreign.  
2. Edit the information as desired.  
3. Tap on Done to save the result.  
The result of the calculator is indicative only.  
The calculation accuracy is 10 decimal places.  
The result is then truncated after the 10th  
decimal digit for the next operation.  
A new contact is created in your phonebook.  
Firewall  
Use the firewall to reject the incoming calls or  
messages from those included in the blacklist.  
Mode: Turn the firewall mode on or off.  
Black list numbers: Edit a list of phone numbers.  
You can reject all the calls or messages from such  
numbers.  
E-Dictionary (if available)  
It is an English-Chinese and Chinese-English  
dictionary. To look up a word in the dictionary,  
1. Type in the word.  
Select your desired text entry methods (see  
"Text entry" on page 11). Press R to exit the  
input mode, if necessary.  
To add a phone number from your  
phonebook  
1. Go to Contacts > View contacts. Select your  
2. Tap on OK to look up the word in the  
dictionary.  
desired contact.  
Tools  
33  
 
   
and forward them in your messages (see "MMS" on  
page 18).  
7. Browser  
Input address: Enter a web site address.  
Recent pages: Access a web site you visited before.  
You can use this function to browse the Internet.  
Consult your network operator for the service  
subscription, data account information, and WAP  
settings.  
Enable/disable push messages  
WAP push messages are specially formatted SMS  
messages that contain a URL. With such a URL, you  
can connect to a web site address through the  
WAP browser of your phone.  
Manage your browser  
To enable or disable the function, go to Browser  
>
In Browser  
>
Browser  
>
Settings,  
Settings  
>
Service message settings.  
Edit account: Define or select your Internet access  
settings.  
Browser options: Define the time for an access  
attempt, or choose whether to show images on  
web pages.  
Clear cache, Clear cookies: Clear the history and  
cookies of the browser.  
STK  
The availability of the features in this menu depends  
on whether or not your SIM card supports STK. If  
your SIM card supports STK function, the STK  
menu will be displayed on the screen.  
Access web sites  
You can access a web site in different ways:  
Homepage: Access the homepage. Save your  
favorite web site as your homepage.  
Bookmarks: Access the web site saved as  
a
bookmark. By storing a website as bookmark, you  
can save and quickly access your favorite websites,  
34  
Browser  
 
       
To select photo settings  
8. Camera  
Tap on  
to select Image size and/or Quality.  
To store photos on the phone or memory card,  
tap on  
to select Storage.  
Your mobile phone features a digital camera that  
allows you to take pictures (up to 3.2 Mega pixels)  
and record short video clips.  
To select your shooting mode  
• Continuous shooting: Shoot 3 or 9 photos in a  
sequence at a time. Tap on  
Continuous shot > 3-shot or Burst shot.  
on the screen.  
to select  
appears  
Camera  
• Delayed shooting: Start shooting after the set  
time span. Tap on to select Timer for timer  
setting. The delay timer icon appears on the  
screen.  
Take photos  
On the idle screen, long press the camera key, or  
go to Menu > Camera. Tap on  
camera, if necessary.  
to switch to the  
• Press the camera key gently to focus. A blue  
square appears. Hold down the camera key until  
the auto focus is completed and picture  
captured.  
Auto shooting setting  
Tap on  
to select Scenes > Auto. Select Night  
for shooting at night.  
• Or, tap on  
to take a photo without auto  
focus.  
• Press  
to exit.  
To zoom in or out  
• Press or to zoom out or in.  
+
-
To avoid the impacts on photos caused by  
flickers from lighting sources, such as fluorescent  
Camera  
35  
 
 
lamps, select 50Hz in  
power supply is 220V, and 60Hz if 110V.  
Color settings:  
To remove the effects on colors by  
surroundings, tap on  
the scenes similar to yours.  
To add effects, tap on  
your desired options.  
> Banding if the AC  
vice versa).  
: Tap to exit.  
To view photos one by one  
1. In My files > Phone or Memory card > Pictures,  
select the photo you will start with. Tap on  
Options > Slide show.  
2. To select the playback settings, tap on Settings:  
Type of playback > Auto (Once): Play photos one  
by one once and automatically.  
> Picture mode to select  
> Effects to select  
Type of playback > Auto (Repeat): Play photos  
one by one repeatedly and automatically.  
To restore the default settings  
Tap on > Restore.  
Type of playback > Manual: Tap on  
/
to  
move to previous or next photo.  
Speed: Select long or short interval between  
two photos.  
Effect: Select the transition between two  
View photos  
All the pictures are saved to My files > Phone or  
Memory card > Picturesdepending on the storage  
location you selected. To view the pictures,  
photos.  
1. In the camera mode, tap on  
> View  
Horizontal view > On: Show photos in horizontal  
view.  
Horizontal view > Off: Show photos in vertical  
view.  
picture. Select your desired photo.  
2. Tap on the screen to show the on-screen  
menu, if necessary.  
/
: Tap to move to previous or next  
Share and use photos  
photo. Or, press < or >.  
See "My files" on page 45.  
To zoom in or out the photo, tap on the zoom  
icon on the screen, or turn the phone by 90  
degrees (vertical to horizontal position, or  
36  
Camera  
 
To avoid the impacts on video clips caused by  
flickers from lighting sources, such as fluorescent  
Video recorder  
Video recording  
lamps, select 50Hz in  
> Banding if the AC  
On the idle screen, long press the camera key, or  
power supply is 220V, and 60Hz if 110V.  
Color settings:  
To remove the effects on colors by the  
go to Camera. Tap on  
recorder, if necessary.  
to switch to the video  
Tap on  
• Press  
to start or stop video recording.  
to exit.  
surroundings, tap on  
> Picture mode to  
select the scenes similar to yours.  
To add effects, tap on  
your desired options.  
> Effects to select  
To select file settings  
Tap on  
to set the file size, format, and image  
quality in File size limit, Encode format and Quality.  
To store photos on the phone or memory card,  
Play video clips  
Your video recording is saved to My files > Phone  
or Memory card > Videos. To play a video clip,  
tap on  
to select Storage.  
To select recording settings  
1. In the video mode, tap on  
Select your desired video clip.  
2. Tap on the screen to show the on-screen  
menu, if necessary.  
> View video.  
> Record audio: Turn it on to make audio  
recording in the time of video recording.  
> Rec time limit: Set a time limit to the  
recording.  
: Tap to start or pause playback.  
: Tap to search forward.  
: Tap to exit.  
: Tap to select your playback settings.  
: Tap to switch to the camera mode.  
Auto shooting setting  
Tap on  
to select Scenes > Auto. Select Night  
for shooting at night.  
Manual shooting setting  
• Light settings:  
Share video clips  
See "My files" on page 45.  
Tap on  
to select your EV (exposure value)  
options.  
Camera  
37  
 
Run Java games and applications  
9. Fun  
Your phone is preloaded with some Java games and  
applications. Select your desired program, tap on  
Launch to start it.  
Java  
To run some Java applications (untrusted third  
party software) on your phone, you may need to  
adjust the Java settings.  
1. In Fun > Java, select the application to be  
launched.  
2. Tap on Options > Setting, and select your  
option as needed:  
Network access: permission to network access  
Your mobile phone features a Java run-time  
environment, which allows you to run Java  
applications, such as games downloaded from the  
network.  
The first time you launch Java, a message appears to  
alert you that the installation and configuration of  
Java will take several moments.  
Install Java games and applications  
Auto invocation: permission to launch the MIDlet  
automatically  
Messaging: permission to send and receive  
You can download Java games and applications  
from the Internet to your phone via the WAP, or  
install them from PC via the supplied USB cable.  
messages  
Multimedia: permission to photographing, or sound/  
Consult your network operator for the services.  
video recording  
Read user data: permission to read your data, like  
contacts and calendar entries  
Write user data: permission to write your data  
When installing games via a USB data cable, make  
sure that you save the .jar and .jad files in the same  
file folder under My files > Others on your phone or  
memory card. Select a file to be installedand tap  
on Intall to start the installation.  
Local connectivity: permission to local connectivity,  
like the Bluetooth connectivity.  
38  
Fun  
 
 
Sensor games  
In Fun > Sensor games, your phone is preloaded with  
some sensor games, for which you can use the  
built-in motion sensor.  
In the games, to go to the left or right, you can  
move your phone in the direction.  
Fun  
39  
 
Transfer music files from PC to your phone  
1. Use the supplied USB data cable to connect  
your phone with the PC. Select Mass storage  
on your phone.  
10. Music  
2. Copy the music files from the PC to the Audio  
folder on your phone or memory card (see  
"Insert Micro-SD card (memory card)" on  
Page 10).  
3. Remove your phone (a USB mass storage  
device) from the PC safely.  
Music player  
Save MP3, WMA, AAC, AAC , and AMR music  
files under the Audio folder on your phone or  
memory card. You can play the music on your  
phone.  
4. On your phone, go to Music > Music player >  
Settings > Refresh list.  
Create your music library  
Edit music files on your PC  
All the music files are transferred.  
1. Run Windows Media Player (or other music  
management program) on your PC.  
2. To add music files, click Media Library on the  
left menu, and then click Add on the top menu.  
3. On the left pane, select All Music.  
On the right pane, all the music files you  
added are displayed.  
Play music  
The music files are organized in two folders on the  
phone or memory card.  
All songs: all the songs on your phone.  
Artists: songs sorted by artist.  
Play music files  
4. Click Title, Artist, Album to edit them as  
desired.  
1. If you have inserted a memory card on your  
phone, select your music source in Music >  
Music player > Settings > Music source: Phone or  
Memory card.  
2. Select your desired song in a folder.  
You start playback from the song. On the  
Operations may vary according to music  
management software or Windows Media  
Player versions. Consult the help file of the  
software.  
40  
Music  
 
   
playback screen, the file information and  
selected playback settings are displayed.  
3. To select your plackback settings,  
Tap on Options:  
To continue to play music after exiting the  
music player,  
go to Music > Music player > Settings > Play in  
background, and select Ask first or Always.  
Add to ringtone list: Set current song as the  
ringtone of incoming calls.  
Play in background: Continue to play music  
after exiting the music player.  
Add to playlist: Add current song to a selected  
playlist.  
Repeat: Select One to play current file  
repeatedly; select All to play all the files in the  
folder repeatedly.  
Shuffle > On: Play music files in the folder  
randomly.  
Tap on Options > Equaliser to select sound  
settings suitable to your songs.  
To turn off the music player on the idle  
screen,  
Press ), and then tap on Yes.  
When listening to music, adjust the volume to a  
moderate level. Continuous exposure to high  
volume may impair your hearing.  
Create playlists  
You can create up to 10 playlists for songs that you  
wish to play at this time. Your last played songs are  
saved to My playlists  
>
Last played.  
1. Select your desired song.  
2. Tap on Options > Add to playlist.  
Existing playlists are displayed.  
4. During playback (on the playback screen),  
If necessary, select Now playing on the Music  
player screen to go to the playback screen.  
3. To create a new playlist, select My playlists  
>
New playlist, and then assign a file name to the  
playlist. Repeat Step 1 and 2.  
4. Select the playlist where you add the song.  
The song is added to the selected playlist.  
/
/
: tap to start or pause playback  
: tap repeatedly to select a song.  
+ or -: tap to adjust the volume  
R: press to return to the previous menu  
): press to go to the idle screen  
Music  
41  
 
Listen to music through a stereo  
Bluetooth headset  
FM radio  
Tune to a radio station  
To tune to a radio station, always plug the supplied  
headset into your phone.  
Auto tune:  
In Music > FM radio, select Options > Preset auto  
search.  
1. Check that your phone is connected to a  
stereo Bluetooth headset that supports  
A2DP profile (Bluetooth stereo output).  
For the Bluetooth connection, see "Connect  
to a Bluetooth device" on Page 49.  
2. In Music > Music player > Settings > Bluetooth  
settings,  
The  
radio  
frequency  
scanning  
starts  
automatically. Up to 20 available radio stations  
are saved to Channel.  
The first preset radio station starts to play.  
BT stereo output: Tap on < or > to select On.  
BT stereo headset: Tap to select a connected  
stereo Bluetooth headset.  
Or,  
3. Play your music files (see "Play music" on Page  
40).  
To play music through the loudspeaker again  
1. Select Off in BT stereo output (see Step 2 in  
"Listen to music through a stereo Bluetooth  
headset").  
- In Music > FM radio, press  
or  
to start  
the auto tuning to the next available station,  
if no preset station is stored in the channel  
list.  
Manual tune:  
In Music > FM radio, select Options > Manual input  
to enter your desired radio frequency.  
Or,  
2. Turn off the Bluetooth headset.  
- In Music > FM radio, repeatedly long press  
or  
to tune to an available station, if  
no preset station is stored in the channel list.  
42  
Music  
 
   
Edit the channel list  
Listen to a radio station  
1. Go to Music > FM radio.  
The last played station starts to play.  
2. Tune to your desired station. To select a  
preset station,  
You can assign a preset to a certain location. When  
pressing the numeric key on the radio playback  
screen, you tune to the station immediately.  
1. In Music > FM radio, tap on Channel to enter  
the channel list.  
- press  
or  
repeatedly;  
- or, tap on Channel;  
2. Tap on a location for your preset .  
3. Tap on Edit or Options > Edit to edit the  
channel list:  
Channel name: Name or rename the channel.  
Frequency: Enter your desired frequency.  
The old frequency in the location is replaced.  
Or  
1. Tune to your desired station (see "Tune to a  
radio station").  
2. On the radio playback screen, long press your  
desired numeric key.  
- or, press a numeric key.  
3. On the radio playback screen,  
: Tap to pause or resume radio playback.  
+/-: Tap to turn up or down volume.  
Options > Play in background: Tap to exit the  
radio and continue playback.  
Options > Loud speaker: Turn it on to listen to  
the radio through the speaker.  
Options > Turn off FM radio: Turn off and exit  
the radio.  
4. To return to the idle screen during playback,  
press).  
To turn off the radio on the idle screen,  
Current station is saved to the location  
(corresponding to the numeric key) in  
Channel.  
• Press ), and then tap on Yes.  
3. To edit the channel name, tap on Channel to  
select a channel. Tap on Options > Edit to edit  
the channel name.  
Music  
43  
 
Record radio programs  
You can record a radio program when listening to  
it.  
1. On the radio playback screen, tap on Options >  
Record to start recording.  
2. Tap on Pause/Cont. to pause or resume  
recording. Tap on Stop to stop recording.  
A file name is generated for the recording file.  
Edit the file name as desired, if necessary.  
3. Tap on Save to save the file.  
You can find the recording file under My files >  
Phone or Memory card > Audio.  
RDS (dependent on the radio station  
service)  
The feature RDS (Radio Data System) is a  
service that allows FM stations to send additional  
information along with the regular FM radio  
signal.  
When you are listening to an RDS station, received  
text information appears on the screen, including  
station name, program type (for example, News,  
Sports, and Info), and frequency.  
To enable the RDS reception of your phone,  
In Music > FM radio, tap on Options > RDS, and  
select On.  
44  
Music  
 
Select your default storage location  
11. My files  
Go to Settings  
>
General  
>
Default storage. Tap to  
select the default location, phone or memory  
card.  
Manage your files  
On the phone, all the files are stored under the  
folders of the phone memory or memory card.  
Create sub-folders  
You can create sub-folders under the folders (like  
Pictures, Videos, Audio and Others) or an existing sub-  
folder.  
Find your files  
1. Go to My files.  
2. Select Phone or Memory card, if you have  
installed a memory card on your phone. Select  
your desired file folder:  
1. Select a folder or sub-folder under which you  
wish to create a folder.  
2. Tap on Options  
>
New folder.  
Pictures: for photos, .jpg files and others  
Videos: for video files, and others  
Audio: for audio files, like sound recording,  
radio recording, music files, ringtones, and  
others  
3. In the editing screen, enter a file name.  
Select your desired text entry methods (see  
"Text entry" on page 11). Press R to exit the  
input mode, if necessary. Tap on Done to finish  
editing.  
Others: for all other files, like Ebook (for files  
A sub-folder is created.  
readable through Tools  
readable through Tools  
>
Text reader), files  
Manage your files  
>
Document reader, and  
You can copy and move, delete, or rename your  
files.  
files received via the Bluetooth  
3. If necessary, open a folder, and tap on Options  
to select your view settings:  
1. Select a file under a folder.  
2. Tap on Options to select your desired option.  
3. To copy or move a file, select the desired  
folder, and tap on  
Sort by: Show files in the order of name, type,  
time or size.  
My files  
45  
 
   
Done: Move or copy the file to current folder  
or sub-folder.  
Use your files  
To use a picture file as contact picture or  
wallpaper  
Open  
under current folder/sub-folder.  
Open Options New folder: Create a sub-  
>
Options  
>
Open: Open a sub-folder  
Select the photo, and tap on Options > Use.  
The photo is set to the wallpaper (see "Display" on  
page 54), or the contact picture of a contact in your  
Smart Phonebook (for the image size 240 x 400,  
see "Add a contact to Smart phonebook" on page  
25).  
>
>
folder under current folder/sub-folder.  
To copy, move, or delete multiple files,  
1. In a file folder, tap on Options  
>
Select multiple,  
and select your desired option.  
2. Select Select all or Select one by one to display a  
fully checked or unchecked list.  
3. Tap to check or uncheck your selection.  
4. Tap on Done to confirm.  
To set an audio file as ringtone  
Select an audio file, and tap on Options  
>
Set as  
ringtone.  
You can set the audio file to ringtone (see "Sounds"  
on page 54), or contact ID (see "Add a contact to  
Smart phonebook" on page 25).  
Share your files  
You can share your picture, audio or video files  
with others via the MMS, E-mail, or Bluetooth.  
1. Select your desired picture, audio or video  
file, and tap on Options  
>
Send.  
2. Select the option to send the file via the MMS,  
E-mail, or bluetooth.  
If you send your files via the Bluetooth, check  
your Bluetooth connection first.  
(see "Bluetooth" on page 49 )  
46  
My files  
 
 
Call options  
This menu allows you to set call-related options.  
12. Calls  
Headset  
answer  
Turn it on to answer an incoming  
call automatically when using a  
headset (see "Headset" on  
page 65). Tap to turn it On or Off.  
Call history  
You are provided with the records about your  
incoming and outgoing calls.  
Any key  
answer  
Turn it on to answer an incoming  
call by briefly pressing any key (  
except for ) and R). Tap to turn  
it On or Off.  
Go to View calls to check your call history.  
You can reply to such calls or add such contacts to  
your phone book. Go to the call list, select the  
contact or phone number, and tap on Options to  
select your options.  
Call time  
reminder  
Get reminded after the specified  
call time span once or repeatedly.  
Go to Clear history to clear your call history as  
desired.  
Calls  
47  
 
   
Call services Call timers: Depending on your  
network, rounding-off for billing  
purposes, taxes and others, the  
actual time invoiced for calls and  
services by your service provider  
may vary.  
Call barring  
Set limits to your incoming and  
outgoing calls. Select Change barring  
passward to change the call barring  
password.  
(network-dependent and requiring  
a call barring password provided by  
the network operator).  
Call cost: network-dependent  
Call waiting: Get informed of an  
incoming call when on phone  
(network-dependent, see "Answer  
a second call" on page 16).  
Caller ID: Set how to show your  
number to the called party  
(network-dependent).  
Auto redial  
Fixed dial  
Keep redialing the call number that  
fails to go through.  
Restrict your outgoing calls to  
certain numbers (PIN2 code  
required).  
IP dial  
(network -dependent, available only  
in China): Add the preset IP  
number to outgoing call numbers.  
Call divert  
Divert incoming calls to your voice  
mailbox or to another phone  
number (regardless of whether or  
not the number is in your  
phonebook).  
48  
Calls  
 
   
3. Select the device you wish to connect.  
4. Enter your Bluetooth password (0000 by  
default) to start pairing.  
13. Bluetooth  
The pairing is made if your pairing request is  
accepted by the other device.  
About Bluetooth  
To listen to music or audio files through a  
Bluetooth headset  
Consult the user documentation of the Bluetooth  
headset. Check that your Bluetooth headset  
supports A2DP profile (Bluetooth stereo output).  
Your phone supports Bluetooth wireless  
technology, allowing connection to a compatible  
Bluetooth device within 10 meters. The Bluetooth  
connection can be subject to interference from  
obstructions such as walls or other electronic  
devices.  
Before you can apply Bluetooth, make sure the  
other device supports Bluetooth function by  
contacting the device’s manufacturer or its  
accompanied documentation.  
To control music playback through a  
Bluetooth headset  
Consult the user documentation of the Bluetooth  
headset. Check that your Bluetooth headset  
supports AVRCP profile (audio/video remote  
control).  
Connect to a Bluetooth device  
Consult the user documentation of the Bluetooth  
device to be connected. Prepare the Bluetooth  
device for pairing.  
To connect to a device you connected previously  
1. On the device, check that the Bluetooth  
function is enabled.  
2. Turn on the Bluetooth of your phone.  
1. Go to Bluetooth  
>
Power. Tap on On, if  
necessary, to turn on the bluetooth function.  
2. Select Find devices to start searching for  
available Bluetooth devices.  
3. On your phone, go to Bluetooth  
>
My devices.  
Check that the device is in the list.  
A list of available Bluetooth devices appears.  
Bluetooth  
49  
 
   
The connection is established. If necessary,  
select the device and tap on Connect.  
If you do not use the Bluetooth feature for  
some time, you should deactivate it in order to  
conserve battery power.  
Get connected by a Bluetooth  
device  
1. Go to Bluetooth  
>
Settings:  
Change device name: Edit the name of your  
phone.  
Visibility: Turn it on to make your phone  
visible to other Bluetooth devices  
2. Go to Bluetooth  
>
Power. Tap on On, if  
necessary, to turn on the bluetooth function.  
The pairing is made when you receive and  
accept the pairing request (enter the  
password 0000 if necessary).  
Edit your device list  
All the devices you have connected are saved to  
My devices. To edit the device list,  
1. Go to Bluetooth  
>
My devices.  
2. To rename or delete a device, tap on Options  
to select your options.  
50  
Bluetooth  
 
Apply a profile  
14. Profiles  
1. In Profiles, select the profile to be applied.  
2. Tap on Activate to activate the profile.  
To activate the Meeting mode, long press #  
on the idle screen.  
Adjust ringer settings to different  
scenes  
The profiles are defined for several scenes. They  
consist of the settings for ringtones, volume, and  
others. With preset profiles, you can easily adjust  
the settings for incoming calls and messages as  
desired.  
If you select Flight mode, you disable the  
connection between your phone and your  
mobile phone network.  
Define your profiles  
This phone has provided you several preset  
profiles. You can use the default settings or change  
them as desired.  
The settings for Flight mode (on a plane) and  
Silent mode are unchangeable.  
To change the settings:  
1. In Profiles, select the profile to be changed. Tap  
on Modify.  
2. Select the item to be changed. Tap to select  
your desired options.  
3. Repeat Step 2 until you finish the settings. Tap  
on OK.  
Profiles  
51  
 
 
15. Settings  
PIN protection: Set PIN or PIN2  
password protection for your SIM  
card. (The PIN or PIN2 are  
provided by the network operator.  
)
General  
Change PIN and Change PIN2:  
Change your PIN and PIN2  
passwords as desired.  
Language  
Select a language for your phone.  
Time & date Set the clock of the phone (See "Set  
clock" on page 9 and "Display local  
and international clocks" on page  
9).  
If you enter an incorrect PIN  
code three times in succession,  
the PIN code of your SIM card  
will be locked automatically and  
you will be prompted to enter  
the PUK code to unlock it. You  
can obtain the PUK code from  
your network operator. If you  
enter an incorrect PUK code ten  
times in succession, the SIM card  
will be locked permanently.  
When this happens, please  
contact your network operator  
or retailer.  
Auto power-on time: Set time for the  
phone to be switched on  
automatically.  
Auto power-off time: Set time for the  
phone to be switched off  
automatically.  
Pen  
calibration  
This menu allows you to calibrate  
the stylus (See "Stylus" on page 3).  
Security setup This menu allows you to use  
passwords to protect your SIM  
card, phone, and information  
stored on the phone.  
52  
Settings  
 
 
Phone lock: Set password protection  
for your phone. You are required  
to enter the password each time  
you turn on the phone (1122 by  
default).  
Default  
storage  
Select the default storage location  
for your files: phone or memory  
card (if a memory card is inserted  
on your phone).  
Memory  
status  
Check the memory occpancy of  
Contacts, Messaging and My files:  
on phone and SIM card, or on  
Safeguard: Set password protection  
for the information stored on your  
phone.  
phone and memory card (if  
a
Safeguard: Enter your password  
to turn the password protection  
on or off (1122 by default).  
Activation: Enter your password  
to select the information that  
accepts the password protection:  
msg(s), Contacts, View calls or/and  
Speed dial.  
memory card is inserted on your  
phone).  
Active slide  
Select whether to answer an  
incoming call by pushing up the  
slide. Tap to select On or Off.  
Active slide  
lock  
Select whether to lock the keypad  
by pulling down the slide. Tap to  
select On or Off.  
Change  
safeguard  
password:  
Change your password as  
desired.  
Auto keypad Set an idle time span for the keypad  
lock  
to be locked automatically.  
To unlock the keypad, push up the  
slide, or drag out the innermost  
dot.  
Speed dial  
Shortcut  
Call a contact by long pressing a  
numeric key (See "Speed dial" on  
page 14).  
Set the quick access menu on the  
idle screen (See "Shortcut menu"  
on page 2).  
Settings  
53  
 
Factory  
settings  
Restore your phone settings to the  
default values. You need to enter  
your phone lock password (1122 by  
default).  
Greeting  
Select whether to show greetings  
when your phone is turned on.  
Light sensor  
Select whether to have the  
backlight  
automatically  
luminance.  
level  
to  
adjusted  
ambient  
Display  
Wallpaper  
Select an image as the wall paper  
of your phone. You can select  
either a default wallpaper or one  
of your pictures stored in My files.  
Sounds  
Alert type  
Ringtones  
Select alert types.  
Select a ringtone for incoming calls  
and messages.  
Themes  
Define the theme for your phone.  
Backlight level Select the brightness of backlight.  
Ring volume Adjust the volume of rings.  
Backlight  
duration  
Select the duration of backlight.  
Key sound  
Select whether the key sounds when  
pressed.  
Show  
number  
own Select whether to show your  
phone number or name on the  
idle screen. Set your phone  
number or name in Contacts >  
Extra numbers > My numbers.  
Slide sound  
Select whether the slide sounds  
when you push it up or down.  
Tap vibration Select  
whether  
there  
is  
accompanyingvibrationforeachtap.  
Shutter sound Select shutter sounds for your  
camera.  
54  
Settings  
 
   
change the network, some problems may arise  
during the operation of your phone.  
Battery low  
Select whether a warning tone is  
emitted when the battery level is  
low.  
Browser  
See "Manage your browser" and "Enable/disable  
push messages" on page 34.  
Connectivity  
This menu allows you to define the service settings  
available on your phone.  
Connections  
The menu allows you to define the Internet access  
profiles of your phone. Such profiles are usually  
pre-defined in your SIM card. Consult your  
network operator for details.  
Call options  
See "Call options" on page 47.  
Message settings  
See "Define your message settings" on page 20.  
Java settings  
Java audio  
Set the volume level.  
Network settings  
Java vibration Turn the vibration On or Off.  
Network  
selection  
Select the network for your phone  
(service subscription-dependent).  
Java network Select a Java network (service  
Automatic is recommended.  
subscription-dependent).  
Heap size  
Display allowed maximum size for  
Java memory.  
GPRS  
connection  
Select how to search the network.  
Preferences Select your preferred network.  
Motion sensor  
See "Senors" on page 3  
You can select a network other than your home  
network only if it has  
a
valid roaming  
agreement with your home network. If you  
Settings  
55  
 
Bluetooth feature is activated.  
Icons & symbols  
The Bluetooth headset is connected.  
In idle mode, several symbols can be displayed  
simultaneously on the main screen.  
Headset - The headset is plugged into the  
phone.  
If the network symbol is not displayed, the  
network is currently not available. You may be  
in a bad reception area; moving to a different  
location may help.  
Alarm  
-
The alarm clock has been  
activated.  
Roaming - Displayed when your phone is  
registered to a network other than your  
own (especially when you’re abroad).  
Silent - Your phone will not ring when  
receiving a call.  
Home zone - A zone designated by your  
Vibration only - The phone will vibrate  
when there is an incoming call.  
network  
operator.  
Subscription  
dependent, contact your service provider  
for details.  
Battery - The bars indicate the battery level  
(4 bars=full, 1 bar=low).  
GSM Network - your phone is connected  
to the GSM network.  
Reception quality - the more bars are  
shown the better the reception is.  
SMS - You have received a new SMS  
message.  
MMS message - You have received a new  
multimedia message.  
GPRS attach - Your phone is connected to  
the GPRS network.  
Wap message - You have received a Wap  
push message in the message inbox.  
EDGE attach - Your phone is connected to  
the EDGE network.  
Missed call - You have a missed call.  
Firewall - You have turned on the firewall.  
Call divert - All your incoming voice calls  
are being forwarded to a number.  
56  
Download from Www.Somanuals.com. All Manuals Search And DownIlcooand.s & symbols  
borrowing your phone.Furthermore to prevent  
unauthorized use of your phone:  
Precautions  
Keep your phone in a safe place and keep  
it out of small children's reach.  
Avoid writing down your PIN code. Try  
to remember it instead.  
Radio Waves  
Your cellular mobile phone is a low  
power radio transmitter and  
receiver. When it is operating, it sends  
and receives radio waves. The radio waves  
carry your voice or data signal to a base station that  
is connected to the telephone network. The  
network controls the power at which the phone  
transmits.  
Your phone transmits/receives radio waves in the  
GSM frequency (850/900 / 1800 / 1900 MHz).  
• The GSM network controls transmission power  
(0.01 to 2 watts).  
Your phone complies with all relevant safety  
standards.  
• The CE mark on your phone shows compliancy  
with European electromagnetic compatibility  
(Ref. 89/336/EEC) and low voltage directives  
(Ref. 73/23/EEC).  
Switch off the phone and remove the battery if you  
are going to leave it unused for a long time.  
Change your PIN code after purchasing the phone  
and to activate call restriction options.  
The design of your phone complies with  
all applicable laws and regulations.  
However your phone may cause  
interference with other electronic  
devices. Consequently you should follow all local  
recommendations and regulations when using  
your cellular phone both at home and when away.  
Regulations on the use of cellular phones in  
vehicles and aircraft are particularly  
stringent.  
Public concern has been focused for some time on  
the possible health risks for users of cellular phones.  
The current research on radio wave technology,  
including the GSM technology, has been reviewed  
and safety standards have been drawn up to ensure  
protection from exposure to radio wave energy.  
Your cellular mobile phone is your responsibility.  
To avoid damage to yourself, to others or to the  
phone itself, read and follow all the safety  
instructions and make them known to anyone  
Precautions  
57  
Your cellular telephone complies with all  
applicable safety standards and the Radio  
Equipment and Telecommunications Terminal  
Equipment Directive 1999/5/EC.  
liquefied petroleum gas (LPG), check first that the  
vehicle complies with the applicable safety rules.  
In areas where you are requested to turn off radio  
transmitting devices, such as quarries or other  
areas where blasting operations are in progress.  
Check with the vehicle manufacturer that  
electronic equipment used in your  
vehicle will not be affected by radio  
energy.  
Always switch off your phone  
Inadequately protected or sensitive electronic  
equipment may be affected by radio energy. This  
interference can lead to accidents.  
Before boarding an aircraft and/or when  
packing the phone in your luggage: the use  
of mobile phones in an aircraft may be  
dangerous for the operation of the aircraft, disrupt  
the mobile phones network and may be illegal.  
In hospitals, clinics, other health care  
centres and anywhere else where you may  
be in the close vicinity of medical  
equipment.  
Pacemakers  
If you have a pacemaker:  
• Always keep the phone more than 15 cm from  
your pacemaker when the phone is switched on,  
in order to avoid potential interference.  
• Do not carry the phone in a breast pocket.  
• Use the ear opposite to the pacemaker to  
minimize the potential interference.  
• Switch off your phone if you suspect that  
interference is taking place.  
In areas with a potentially explosive  
atmosphere (e.g. petrol stations and  
also areas where the air contains dust  
particles, such as metal powders).  
Users of hearing aids  
If you are a user of a hearing aid, consult your  
physician and hearing aid manufacturer to learn  
whether your particular device is susceptible to  
cellular phone interference.  
In a vehicle transporting flammable products (even  
if the vehicle is parked) or a vehicle powered by  
58  
Precautions  
period of time as well as avoiding unnecessary  
navigating in the menus will also help to save the  
battery's energy for longer phoning and stand-by  
performances.  
Improved performance  
In order to improve the performance of your  
phone, reduce radio energy emission, reduce  
battery consumption and ensure safe  
operation adhere to the following guidelines:  
For the optimal and satisfactory operation  
of the phone, you are recommended to  
use the phone in the normal operating  
position (when not using in hands-free  
mode or with a hands-free accessory).  
• Do not expose your phone to extreme  
temperatures.  
Treat the phone with care. Any misuse will void  
the International Guarantee.  
• Do not immerse the phone in any liquid; if your  
phone is damp, switch it off, remove the battery.  
and let them dry for 24hrs before using them  
again.  
To clean the phone, wipe it with a soft cloth.  
• Placing and receiving calls consumes the same  
amount of battery energy. However, the mobile  
consumes less energy in idle screen when kept in  
the same place. When in idle screen and while  
you are moving, your phone consumes energy to  
transmit updated location information to the  
network. Setting the backlight for a shorter  
Battery information  
Your phone is powered by  
battery.  
a
rechargeable  
• Use specified charger only.  
• Do not incinerate.  
• Do not deform or open the battery.  
• Do not allow metal objects (such as keys in your  
pocket) to short circuit the battery contacts.  
• Avoid exposure to excessive heat (>60°C or  
140°F), moisture or caustic environments.  
You should only use Philips authentic  
battery and accessories, as the use of any  
other accessories may damage your  
phone and may be dangerous, and will  
make all guarantees for your Philips phone  
null and void. The use of an incorrect type of  
battery may also cause an explosion.  
Make sure damaged parts are replaced immediately  
by a qualified technician and that they are replaced  
with genuine Philips replacement parts.  
Precautions  
59  
phone and also avoid using it with an ambient  
temperature over 40°C.  
Do not use your phone while driving  
For your phone, the socket-outlet shall be installed  
near the phone and shall be accessible.  
Speaking on the telephone while driving  
lowers your concentration, which can be  
dangerous. Adhere to the following  
guidelines:  
Environmental care  
• Give your full attention to driving. Pull off the  
road and park before using the phone.  
• Respect the local regulations in countries where  
you drive and use your GSM phone.  
• If you want to use your phone in a vehicle, install  
the hands-free car kit which is designed for that  
purpose.  
• Ensure that your phone and car kit do not block  
any air bags or other security devices fitted in  
your car.  
Remember to observe the local  
regulations regarding the disposal of the  
packaging materials, exhausted batteries  
and old phone and please promote  
recycling.  
Philips has marked the battery and packaging with  
standard symbols designed to promote the  
recycling and appropriate disposal of your eventual  
waste.  
The use of an alarm system to operate a vehicle's  
lights or horn to indicate incoming phone calls is  
prohibited on public roads in some countries. Check  
local regulations.  
The labelled packaging material is  
recyclable.  
A financial contribution has been made  
to the associated national packaging  
recovery and recycling system.  
EN60950 Norm  
In case of hot weather or after a prolonged exposure  
to the sun (e.g., behind a window or a windscreen),  
the temperature of your phone's casing might  
increase, especially when featuring a metallic finish.  
Be very careful in this case when picking up your  
The plastic material is recyclable (also  
identifies the type of plastic).  
60  
Precautions  
against harmful interference in  
a
residential  
WEEE Marking in the DFU:  
installation. This equipment generates, uses and can  
radiate radio frequency energy and, if not installed  
and used in accordance with the instructions, may  
“Information to the Consumer”  
Disposal of your old product  
cause  
harmful  
interference  
to  
radio  
communications. However, there is no guarantee  
that interference will not occur in a particular  
installation.  
Your product is designed and manufactured with  
high quality materials and components, which can  
be recycled and reused.  
If this equipment does cause harmful interference  
to radio or television reception, which can be  
determined by turning the equipment off and on,  
the user is encouraged to try to correct the  
interference by one or more of the following  
measures:  
When this crossed-out wheeled bin  
symbol is attached to a product it  
means the product is covered by the  
European Directive 2002/96/EC  
Please inform yourself about the local  
separate collection system for  
electrical and electronic products.  
-- Reorient or relocate the receiving antenna.  
-- Increase the separation between the equipment  
and receiver.  
-- Connect the equipment into an outlet on a  
circuit different from that to which the receiver is  
connected.  
Any changes or modifications not expressly  
approved by the party responsible for compliance  
could void the user’s authority to operate the  
equipment.  
This device complies with part 15 of the FCC Rules.  
Operation is subject to the following two  
conditions: (1) This device may not cause harmful  
interference, and (2) this device must accept any  
interference received, including interference that  
may cause undesired operation.  
Please act according to your local rules and do not  
dispose of your old products with your normal  
household waste. The correct disposal of your old  
product will help prevent potential negative  
consequences for the environment and human  
health.  
FCC Compliance Statement  
This equipment has been tested and found to  
comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection  
Precautions  
61  
Tips  
How to prolong the battery life of your  
phone  
To have your mobile phone function properly,  
sufficient battery power is important. For the  
power-saving purpose, do the following, if  
applicable:  
1. Turn off the Bluetooth function of your phone.  
2. Set the backlight level of your phone to a low  
value. Or, turn on the light sensor.  
3. Set the backlight duration of your phone to a  
low value.  
4. Turn on the auto keypad lock. When the  
keypad is locked, your phone goes to the  
power-saving mode.  
5. Turn off the key sounds, tap vibration, or  
vibration alerts.  
6. Establish GPRS connection when needed.  
Otherwise, your phone will keep searching for  
GPRS connection, and drain your battery  
power.  
7. Turn off your phone if there is no coverage.  
Otherwise, the phone will keep searching for  
network, and drain your battery power.  
62  
Tips  
 
Your battery seems to over heat  
You might be using a charger that was not intended  
for your phone. Make sure you always use the  
Philips authentic accessory shipped with your  
phone.  
Troubleshooting  
The phone does not switch on  
Remove/reinstall the battery. Then charge the  
phone until the battery icon stops scrolling. Unplug  
the charger and try to switch on the phone.  
Your phone doesn’t display the phone  
numbers of incoming calls  
Your phone doesn’t return to idle screen  
Long press the hangup key or switch off the phone,  
check that the SIM card and the battery are  
installed correctly and switch it on again.  
This feature is network and subscription  
dependent. If the network doesn’t send the caller’s  
number, the phone will display Call 1 or Withheld  
instead. Contact your network operator for more  
information.  
The network symbol is not displayed  
The network connection is lost. Either you are in a  
radio shadow (in a tunnel or between tall buildings)  
or you are outside the network coverage area. Try  
from another place, try to reconnect to the network  
(especially when abroad), check that the antenna is  
in place if your mobile phone has an external  
antenna, or contact your network operator for  
assistance/information.  
You can’t send text messages  
Some networks don’t allow message exchanges  
with other networks. First check that you have  
entered the number of your SMS centre, or contact  
your operator for more information.  
You can’t display pictures  
A picture may not be accepted by your mobile  
phone if it is too large, if its name is too long, or if  
it doesn’t have the correct file format.  
The display doesn’t respond (or the  
display responds slowly) to key presses  
The display responds more slowly at very low  
temperatures. This is normal and does not affect  
the operation of the phone. Take the phone to a  
warmer place and try again. In other cases, please  
contact your phone supplier.  
You have the feeling that you missed  
some calls  
Check your call divert options.  
63  
 
The display shows INSERT SIM  
Check that the SIM card has been inserted  
correctly. If the problem remains, your SIM card  
may be damaged. Contact your network operator.  
When attempting to use a feature in the  
menu, the mobile displays NOT  
ALLOWED  
Some features are network and subscription  
dependent. They are only available, therefore, if the  
network or your subscription supports them.  
Contact your network operator for more  
information.  
Your phone is not charging  
If your battery is completely flat, it might take a  
while before the charging icon is displayed on the  
screen.  
64  
 
call in 5 or 10 seconds.  
Philips Authentic  
Accessories  
Some accessories, such as battery and charger, are  
included as standard accessories in your mobile  
phone package. Additional accessories may also be  
provided or sold separately. Package contents may  
therefore vary.  
When using the supplied one-key headset, press  
the key to answer a call, and long press the key to  
end the call.  
USB cable  
When connected to a computer through the USB  
cable (compatible with most computers), your  
phone can work as  
To maximize the performance of your Philips  
mobile phone and not to void the warranty,  
always purchase Philips Authentic Accessories  
that are specially designed for use with your  
phone. Philips Consumer Electronics cannot be  
held liable for any damage due to use with non-  
authorised accessories.  
Charger  
Charges the battery on the phone.  
Mass  
Storage  
Allows the data transfer between  
PC and the phone, or the micro-SD  
card inserted into the phone;  
Allows the data management on the  
phone, or micro-SD card through  
your PC.  
Charger  
Charges your battery in any AC outlet. Small  
enough to carry in a briefcase/handbag.  
Webcam  
Acts as a web camera on your PC.  
Headset  
Your phone will activate headset mode  
automatically when you plug in the headset. If you  
select On in Calls > Call options > Headset answer,  
your phone will automatically answer the incoming  
65  
 
 
Install MobilePhoneTools on your PC  
1. Insert the supplied Data communication  
software into the CD drive.  
2. Run the autorun.exe program.  
3. Make selections as prompted, and installation  
starts automatically.  
COM port  
Allows you to back up phone data,  
like phonebooks, on a computer or  
recover the data from the  
computer.  
To do so, install the supplied Data  
communication  
(MobilePhoneTools)  
software  
on your  
computer  
communication  
below).  
(see  
software"  
"Data  
Connect your Phone to the PC  
1. Connect your phone to the PC using the  
supplied USB cable or through the Bluetooth.  
When using the USB cable for connection,  
select COM port on your phone.  
as  
When the transfer is finished, please make sure  
that you safely remove your device based on  
the instruction of your computer.  
The first time you connect your phone to the  
PC, wait till the USB driver of your phone is  
successfully installed.  
Data communication software  
2. On  
your  
PC,  
double  
click  
the  
MobilePhoneTools icon.  
On the bottom left of the menu, “Philips X810  
is connected” is displayed.  
Data  
communication  
software  
(MobilePhoneTools) offers instant sychronization  
between your phone and your computer. You can  
use the software for the data synchronization  
between your phone and PC, like phonebook,  
calendar, SMS messages, and audio/video/picture  
files. With the software and GPRS service, you can  
also connect your PC to the Internet through your  
phone.  
66  
 
PHILIPS and PHILIPS’ Shield  
Emblem are registered  
Trademark Declaration  
trademarks of Koninklijke  
Philips Electronics N.V.  
manufactured by Shenzhen  
Sang Fei Consumer  
T9® is  
Nuance Communications,  
Inc.  
a
trademark of  
Tegic Euro. Pat.  
App. 0842463  
Communications Co., Ltd.  
under  
license  
from  
Koninklijke  
Philips Electronics N.V.  
Bluetooth™ is  
mark owned  
telefonaktiebolaget  
Ericsson, Sweden  
licensed to Philips.  
a
trade-  
by  
L
M
and  
JAVA is a trademark of Sun  
Microsystems, Inc.  
67  
 
Specific Absorption Rate Information  
International standards  
THIS MOBILE PHONE MEETS THE INTERNATIONAL RECOMMENDATIONS FOR EXPOSURE TO  
RADIO WAVES  
Your mobile phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the  
limits for exposure to radio frequency (RF) energy defined by the international standards. These  
recommendations have been established by the International Commission on Non-Ionizing Radiation  
Protection (ICNIRP) and, the Institute of Electrical and Electronics Engineers (IEEE) that forecast a substantial  
safety margin for assuring the protection of all persons, regardless of age and health.  
The exposure recommendations for mobile phones use a measurement unit known as the Specific  
Absorption Rate (SAR). The SAR limit recommended by the ICNIRP for the mobile phones used by the  
general public is 2.0W/kg averaged over ten grams of tissue and, is 1,6W/kg averaged over one  
gram of tissue by IEEE Std 1528 for the head.  
Tests for SAR have been conducted using recommended operating positions with the mobile phone  
transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined  
at the highest certified power level, the actual SAR levels of the mobile phone while operating are generally  
below the maximum SAR value. This is because the phone is designed to operate at multiple power levels so  
as to use only the power required to reach the network. In general, the closer you are to a base station  
antenna, the lower the power output.  
While there may be differences between the SAR levels of various phones and at various positions, they all  
meet the international protection standards for exposure to radio waves.  
The highest SAR value for this Philips Xenium X810 model phone when tested for compliance against the  
standard was 0.315 W/kg for ICNIRP recommendation and 0.858 W/kg for IEEE Std 1528.  
For limiting the radio waves exposure, it is recommended to reduce the mobile phone call duration or to  
use a headset. The purpose of those precautions is to take the mobile phone away from the head and the  
body.  
68  
Download from Www.Somanuals.com. All ManSupalescSifeicarAcbhsAonrdptDioonwnRlaoated.Information  
For body-worn operation, the cell phone meets FCC RF exposure guidelines provided that it is used with a  
non-metallic accessory with the handset at least 1.5 cm from the body. Use of other accessories may not  
ensure compliance with FCC RF exposure guidelines.  
Specific AbsDoorpwtniolonadRfarotemInWfworwm.Saotmioannuals.com. All Manuals Search And Download.  
69  
3. What Will Philips Do if The Product is Not Free  
From Material Defects in Materials and  
Workmanship During The Limited Warranty  
Period?  
Limited warranty  
1. What Does This Limited Warranty Cover?  
Philips warrants to the original retail purchaser  
(“Consumer” or “You”) that this Philips cellular  
product and all accessories originally provided by  
Philips in the sales package (“Product”) are free  
from defects in materials, design and workmanship  
under normal use in accordance with the operating  
instructions and pursuant to the following terms  
and conditions. This limited warranty extends only  
to the Consumer for Products purchased and used  
in the original country of purchase. The limited  
warranty is valid only in Philips’ intended country of  
sales of the product.  
During the limited warranty period, Philips or its  
authorized service representative will, at its option  
either repair or replace, without charge for parts  
or labour, a materially defective Product with new  
or refurbished parts or Product and return such  
repaired or replaced Product to the Consumer in  
working condition. Philips will retain defective  
parts, modules or equipment.  
Repaired or replaced Product will be covered by  
this limited warranty for the balance of the original  
limited warranty period or ninety (90) days from  
the date of repair or replacement whichever is  
longer. Repair or replacement of Product, at  
Philips’ option is your exclusive remedy.  
2. How Long is The Limited Warranty Period?  
The limited warranty period for the Product  
extends for ONE (1) YEAR from the date of  
purchase of the Product, documented by valid  
proof of purchase. The limited warranty for original  
Philips rechargeable battery extends for six (6)  
months from the date of purchase.  
4. What is Not Covered By This Limited Warranty?  
This limited warranty does not cover:  
70  
 
a) Product that has been subjected to misuse,  
accident, shipping or other physical damage,  
improper installation, abnormal operation handling,  
neglect, inundation, fire, water or other liquid  
intrusion; or  
5. How Do You Get Warranty Service?  
a) Return the Product to an authorized  
service center of Philips. You may contact  
the local Philips office for the location of  
the nearest authorized service center.  
b) The SIM card must be removed from the  
Product before it is given to Philips. Philips  
assumes no liability for damaged or loss of  
the SIM card or the data contained  
therein.  
c) If the Product failure is not covered by this  
limited warranty, or this limited warranty  
is inapplicable, void or invalid due to any  
terms and conditions stated herein, the  
Consumer will be charged for the cost of  
repair or replacement of the Product and  
all other related cost incurred in repairing  
or replacing the Product.  
b) Product that has been damaged due to  
repair, alteration, or modification by  
anyone not authorized by Philips; or  
c) Product that has reception or operation  
problems caused by signal conditions,  
network reliability or cable or antenna  
systems; or  
d) Product defects or problems caused by  
uses with non-Philips products or  
accessories; or  
e) Product which warranty/quality stickers,  
product serial number or electronic serial  
number has been removed, altered or  
rendered illegible; or  
f) Product purchased, used, serviced, or  
shipped for repair from outside the  
original country of purchase, or used for  
commercial or institutional purposes  
(including but not limited to Products used  
for rental purposes); or  
d) IMPORTANT - you are required to return  
the Product together with a valid proof of  
purchase which must identify the point of  
purchase, date of purchase, Product  
model and Product serial number clearly.  
g) Product returned without valid proof of  
purchase or which proof of purchase has  
been altered or is illegible.  
6. Other Limitation: This Warranty is The Entire  
Agreement.  
h) Normal wear and tear or Force Majeure.  
71  
 
EXCEPT FOR THE EXPRESS WARRANTIES  
SET FORTH ABOVE AND THOSE IMPLIED  
BY LAW AND WHICH CANNOT BE  
BUSINESS OPPORTUNITIES, COST OF  
SUBSTITUTION OF GOODS OR SERVICES,  
INVESTMENTS, DAMAGE TO GOODWILL  
OR REPUTATION, OR LOSS OF DATA AND  
CLAIMS BY THIRD PARTIES) RESULTING  
FROM PURCHASE OR USE OF THE  
PRODUCT, TO THE FULLEST EXTENT  
ALLOWED BY LAW, WHETHER OR NOT  
PHILIPS HAS BEEN ADVISED OF THE  
POSSIBILTY OF SUCH DAMAGES. THESE  
EXCLUDED  
OR  
MODIFIED  
BY  
AGREEMENT, PHILIPS PROVIDES NO  
OTHER WARRANTY WHETHER EXPRESS  
OR IMPLIED (WHETHER BY STATUTE,  
UNDER THE OPERATION OF LAW OR  
OTHERWISE) AND SPECIALLY DISCLAIMS  
ANY WARRANTY OF SATISFACTORY  
QUALITY MERCHANTABILITY OR FITNESS  
FOR A PARTICULAR PURPOSE.  
PHILIPS’ TOTAL LIABILITY FOR DAMAGES  
RELATING TO OR ARISING OUT OF THE  
PURCHASE OR USE OF THE PRODUCT,  
REGARDLESS OF THE TYPE OR CAUSE OF  
SUCH DAMAGE OR THE FORM OR  
CHARACTERISATION OF THE CLAIM  
ASSERTED (E.G. CONTRACT OR TOPIT),  
SHALL NOT EXCEED THE ORIGINAL  
PURCHASE PRICE PAID FOR THE  
PRODUCT.  
LIMITATIONS  
SHALL  
APPLY  
NOTWITHSTANDING THE FAILURE OF  
THE ESSENTIAL PURPOSE OF ANY LIMITED  
REMEDY.  
This limited warranty represents the complete  
and exclusive agreement between the  
Consumer and Philips with respect to this  
cellular Product and it supercedes all prior  
agreements between the parties, oral or  
written, and all other communications  
between the parties relating to the subject  
matter of this limited warranty. No carrier,  
retailer, agent, dealer, employee, thereof, or  
employee of Philips is authorized to make  
modifications to this limited warranty and you  
should not rely on any such representation.  
This limited warranty does not affect the  
Consumer’s statutory rights under applicable  
national laws in force.  
HOWEVER IN NO EVENT SHALL PHILIPS BE  
LIABLE FOR ANY PUNITIVE, SPECIAL,  
INCIDENTAL,  
INDIRECT  
OR  
CONSEQUENTIAL DAMAGES (INCLUDING  
BUT NOT LIMITED TO THE LOSS OF USE,  
LOSS  
OF  
TIME,  
INCONVENIENCE,  
COMMERIAL LOSS, LOST PROFITS, LOST  
72  
 
SPECTRUM: EN 301 511 V9.0.2  
EN 300 328 V1.7.1  
Declaration of  
conformity  
We hereby declare that all essential radio test  
suites have been carried out and that the above  
named product is in conformity to all the essential  
requirements of Directive 1999/5/EC.  
The conformity assessment procedure referred to  
in Article 10 and detailed in Annex V of Directive  
1999/ 5/EC has been followed related to articles 3.1  
and 3.2 with the involvement of the following No-  
tified Body: CETECOM ICT Services GmbH, Un-  
terturkheimer Strabe6-10, 66117, Saarbrucken,  
Germany.  
We,  
Shenzhen Sang Fei Consumer  
Communications Co., Ltd.  
11 Science and Technology Road,  
Shenzhen Hi-tech Industrial Park,  
Nanshan District, Shenzhen 518057,  
China.  
declare under our sole responsibility that the  
product  
Xenium X810  
Cellular Mobile Radio GSM/GPRS/EDGE 850/  
900/1800/1900  
Identification mark: 0682  
March 18, 2009  
TAC: 35992802  
to which this declaration relates, is in conformity  
with the following Standards:  
SAFETY: EN 60950-1: 2006  
HEALTH: EN50360: 2001;  
EN62209-1: 2006  
Quality Manager  
EMC: EN 301 489-1 V 1.8.1;  
EN 301 489-7 V 1.3.1;  
EN 301 489-17 V1.3.2  
 

Perception Digital MP3 Player PD 205 User Manual
Philips Cassette Player AQ 4420 User Manual
Philips Electric Toothbrush E5000 User Manual
Philips Indoor Furnishings TL D Snow White User Manual
Pioneer Car Stereo System AVH P5200BT User Manual
Polaroid Digital Camera iS536 User Manual
Polycom IP Phone VR 6000 User Manual
Poulan Snow Blower 414639 User Manual
Powermatic Dust Collector PM1300TX User Manual
ProForm Home Gym 831288272 User Manual