Pelco Security Camera C2433SM B User Manual

M A I N T E N A N C E / S E R V I C E  
DF8 Series  
Pendant Dome  
C2433SM-B (4/07)  
 
Description  
DF8 Series pendant domes are discreet surveillance domes that are designed for indoor or outdoor use.  
MODELS  
DF8-PB-0  
Indoor, black, fixed mount pendant dome, black opaque lower dome with smoked viewing window (0.7 F-stop of light loss)  
Same as DF8-PB-0, except clear viewing window (virtually no light loss)  
DF8-PB-1  
DF8-PB-2  
DF8-PB-3  
DF8-PG-0  
DF8-PG-1  
DF8-PG-2  
DF8-PG-3  
DF8-PG-E0  
Same as DF8-PB-0, except chrome lower dome (2 F-stops of light loss)  
Same as DF8-PB-0, except gold lower dome (2 F-stops of light loss)  
Indoor, gray, fixed mount pendant dome, black opaque lower dome with smoked viewing window (0.7 F-stop of light loss)  
Same as DF8-PG-0, except clear viewing window (virtually no light loss)  
Same as DF8-PG-0, except chrome lower dome (2 F-stops of light loss)  
Same as DF8-PG-0, except gold lower dome (2 F-stops of light loss)  
Outdoor, gray, fixed mount pendant dome, heater and blower, black opaque lower dome with smoked viewing window  
(0.7 F-stop of light loss)  
DF8-PG-E1  
Same as DF8-PG-E0, except clear viewing window (virtually no light loss)  
Maintenance  
Clean the acrylic dome as necessary to maintain a clear picture. Be careful not to scratch the surfaces of the dome.  
Exterior surface: Clean the domes exterior surface with a nonabrasive cleaning cloth and cleaning agent that is safe for acrylic plastic. Either  
liquid or spray cleaner/wax suitable for fine furniture is acceptable.  
Interior surface (except chrome or gold): Clean the same as the exterior surface.  
Interior surface (chrome or gold): The inside surface of a chrome or gold dome is easily scratched. Use the following precautions to maintain  
the dome’s surface.  
1. Always handle the dome from the outside of its circular flange.  
2. Never touch the coated inside surface. The acid in your fingerprints will eventually etch the coating if the fingerprints are not carefully  
removed according to the recommended cleaning procedure in item 5.  
3. If dust or other contaminants accumulate on the domes interior, remove the debris with compressed air. Compressed air cans are available  
from photographic equipment or electronic supply dealers.  
4. If heavy residue accumulates and cannot be removed with air pressure, rinse with water and immediately dry with air pressure so that  
water spots will not remain. Avoid wiping the coated surface with direct hand pressure, it will easily abrade unless extreme care is taken.  
Once scratched, the dome cannot be recoated.  
5. If internal wiping is necessary, avoid hand rubbing. Instead, make a wick as follows:  
Use a very soft paper towel. Roll a section into a tightly wound tube. Tear the tube in half, and wet the fuzzy end of the wick with a solution  
of isopropyl alcohol diluted with water. Hold the dome with its opening facing downward and wipe the interior of the dome with the wet  
end of the wick. Use a circular motion, starting from the outside and spiraling into the center. Use a new wick for each two passes over the  
dome.  
C2433SM-B (4/07)  
3
 
Exploded Assembly Diagrams  
1
2
3
4
5
6
7
8
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
Figure 1. Exploded Assembly Diagram, DF8 Pendant Models  
Table A. Exploded Assembly Parts List, DF8 Pendant Models  
Description  
Item  
Qty  
Part Number  
1
3
Screw, 6-32 x 5/16-inch, pan head, Phillips, gray, with plastic washer  
(outdoor models only)  
ZH6-32X.312GRAY  
2
3
4
3
1
1
Internal tooth lock washer, #6 (outdoor models only)  
Sun shield (outdoor models only)  
Top mount, black  
Top mount, gray  
Gasket  
Internal tooth lock washer, #8  
Screw, 8-32 x 3/8-inch, pan head, Phillips  
Back box, black  
Back box, gray  
Base plate  
ZH6LWSIS  
MF02-3020-007B  
MF03-7050-241A  
MF02-7050-241A  
70610012  
5
6
7
8
1
3
3
1
ZH8LWSIS  
ZH8-32X.375SPP  
MF76-3021-056A  
MF79-3021-056A  
PDF54000COMP  
ZH188X435X60C  
ZH10-0301-0400  
MF03-3020-002A  
ZH255X1.50X62  
ZH1/4LWSSL  
ZH1/4-20NUTCH  
MF03-3021-003A  
ZH260X562X65C  
ZH1/4-20X.500CH  
9
1
3
3
1
2
3
2
1
1
1
1
10  
11  
12  
13  
14  
15  
16  
17  
18  
NS  
Flat washer, #8  
Nut, 8-32, hex, Nylock  
Tilt table support leg  
Fender washer, 1/4-inch  
Split lock washer, 1/4-inch  
Nut, 1/4-20  
Tilt table  
Flat washer, 3/16-inch  
Screw, 1/4-20 x 1/2-inch  
Trim leash assembly attached to side of back box  
Leash  
MF00-3020-054A  
ZH6LWSIS  
Internal tooth lock washer, #6  
Nut, 6-32  
ZH6-32NUTSH  
NS = Not shown  
4
C2433SM-B (4/07)  
 
2
3
4
5
7
1
6
7
6
Figure 2. Exploded Assembly Diagram, Heater and Fan Assembly (Outdoor Models Only)  
Table B. Exploded Assembly Parts List, Heater and Fan Assembly (Outdoor Models Only)  
Item  
1
2
3
4
5
6
7
NS  
Qty  
1
1
2
2
2
7
7
1
Description  
Part Number  
PCB9000277BASSY  
SPA9015  
MF01-1041-013A  
HT01-0321-0202  
ZH65-1240-1044  
ZH4-40NUTSH  
ZH4LWSIS  
Circuit board, fan rectifier  
Spacer, 3/16-inch diameter x .125-inch, #4  
Fan/heater shroud  
Heater pad, 24 VAC, 15W  
Fan, 12 VDC, .7W, 7 cfm  
Nut, 4-40  
Internal tooth lock washer, #4  
Power/heater circuit board on side of back box  
Includes thermostat  
PCB9000302ASSY  
On at 40°F (4°C)  
Off at 60°F (16°C)  
SPA8500  
Spacer, .250-inch outside diameter x .125-inch, #6  
Internal tooth lock washer, #6  
Nut, 6-32  
ZH6LWSIS  
ZH6-32NUTSH  
NS = Not shown  
C2433SM-B (4/07)  
5
 
1
2
3
5
4
6
8
7
9
Figure 3. Exploded Assembly Diagram, Pendant Lower Dome  
Table C. Exploded Assembly Parts List, Pendant Lower Dome  
Item  
1
2
Qty  
5
1
Description  
Part Number  
ZH01-2001-0603  
3023-004A  
Screw, 6-32 x 1/4-inch, Phillips head with lock washer  
DF8 Heater Ring Assembly (outdoor models only)  
24 VAC, 60W  
Includes thermostat  
On at 70°F (21°C)  
Off at 85°F (29°C)  
3
4
5
6
7
1
1
1
1
2
Screw, 6-32 x 1/4-inch, Phillips head with lock washer  
Lower dome retainer  
O-ring  
ZH01-2001-0603  
MF00-3020-053A  
ZH69-0105-2756  
GS01-0002-0430  
ZH6-32X.312GRAY  
Trim ring gasket  
Screw, 6-32 x 5/16 inch, pan head,  
Phillips, gray, with plastic washer  
Trim ring, black  
8
9
1
1
MF03-3020-120A  
MF02-3020-120A  
MF00-8080-000B  
MF00-8080-001B  
MF00-8080-002B  
MF00-8080-003B  
Trim ring, gray  
Acrylic dome, black opaque with smoked viewing window  
Acrylic dome, black opaque with clear viewing window  
Acrylic dome (chrome)  
Acrylic dome (gold)  
6
C2433SM-B (4/07)  
 
PRODUCT WARRANTY AND RETURN INFORMATION  
WARRANTY  
Pelco will repair or replace, without charge, any merchandise proved defective in material or  
workmanship for a period of one year after the date of shipment.  
If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or  
(559) 292-1981 to obtain a Repair Authorization number (RA), and provide the following  
information:  
Exceptions to this warranty are as noted below:  
1. Model and serial number  
Five years on fiber optic products and TW3000 Series unshielded twisted pair transmission  
products.  
2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number  
3. Details of the defect or problem  
Three years on Spectra® IV products.  
If there is a dispute regarding the warranty of a product which does not fall under the  
warranty conditions stated above, please include a written explanation with the product when  
returned.  
Three years on Genex® Series products (multiplexers, server, and keyboard).  
Three years on Camclosure® and fixed camera models, except the CC3701H-2,  
CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2, and MC3651H-2X camera models,  
which have a five-year warranty.  
Three years on PMCL200/300/400 Series LCD monitors.  
Two years on standard motorized or fixed focal length lenses.  
Two years on Legacy®, CM6700/CM6800/CM9700 Series matrix, and DF5/DF8 Series fixed  
dome products.  
Two years on Spectra III, Esprit®, ExSite®, and PS20 scanners, including when used in  
continuous motion applications.  
Method of return shipment shall be the same or equal to the method by which the item was  
received by Pelco.  
RETURNS  
In order to expedite parts returned to the factory for repair or credit, please call the factory at  
(800) 289-9100 or (559) 292-1981 to obtain an authorization number (CA number if returned for  
credit, and RA number if returned for repair).  
Two years on Esprit and WW5700 Series window wiper (excluding wiper blades).  
All merchandise returned for credit may be subject to a 20% restocking and refurbishing  
charge.  
Two years (except lamp and color wheel) on Digital Light Processing (DLP®) displays.  
The lamp and color wheel will be covered for a period of 90 days. The air filter is not  
covered under warranty.  
Goods returned for repair or credit should be clearly identified with the assigned CA or RA  
number and freight should be prepaid. Ship to the appropriate address below.  
Eighteen months on DX Series digital video recorders, NVR300 Series network video  
recorders, and EnduraSeries distributed network-based video products.  
One year (except video heads) on video cassette recorders (VCRs). Video heads will be  
covered for a period of six months.  
Six months on all pan and tilts, scanners or preset lenses used in continuous motion  
applications (that is, preset scan, tour and auto scan modes).  
If you are located within the continental U.S., Alaska, Hawaii or Puerto Rico, send goods to:  
Service Department  
Pelco  
3500 Pelco Way  
Clovis, CA 93612-5699  
Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco  
shipment. All goods requiring warranty repair shall be sent freight prepaid to Pelco, Clovis,  
California. Repairs made necessary by reason of misuse, alteration, normal wear, or accident  
are not covered under this warranty.  
If you are located outside the continental U.S., Alaska, Hawaii or Puerto Rico and are instructed  
to return goods to the USA, you may do one of the following:  
If the goods are to be sent by a COURIER SERVICE, send the goods to:  
Pelco  
Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from  
the specific use or application made of the Products. Pelcos liability for any claim, whether  
based on breach of contract, negligence, infringement of any rights of any party or product lia-  
bility, relating to the Products shall not exceed the price paid by the Dealer to Pelco for such  
Products. In no event will Pelco be liable for any special, incidental or consequential damages  
(including loss of use, loss of profit and claims of third parties) however caused, whether by  
the negligence of Pelco or otherwise.  
3500 Pelco Way  
Clovis, CA 93612-5699 USA  
If the goods are to be sent by a FREIGHT FORWARDER, send the goods to:  
Pelco c/o Expeditors  
473 Eccles Avenue  
South San Francisco, CA 94080 USA  
Phone: 650-737-1700  
Fax: 650-737-0933  
The above warranty provides the Dealer with specific legal rights. The Dealer may also have  
additional rights, which are subject to variation from state to state.  
The materials used in the manufacture of this document and its components are compliant to the requirements of Directive 2002/95/EC.  
This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union  
regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling this equipment.  
REVISION HISTORY  
Manual #  
C2433SM  
C2433SM-A  
C2433SM-B  
Date  
9/01  
8/02  
4/07  
Comments  
Original version.  
Added certifications. Revised Important Safeguards and Warnings.  
Update parts lists and formatting.  
Pelco, the Pelco logo, Camclosure, Esprit, ExSite, Genex, Legacy, and Spectra are registered trademarks of Pelco.  
Endura and Spectra III are trademarks of Pelco.  
©Copyright 2007, Pelco. All rights reserved.  
DLP is a registered trademark of Texas Instruments, Inc.  
 
Worldwide Headquarters  
3500 Pelco Way  
Clovis, California 93612 USA  
USA & Canada  
Tel: 800/289-9100  
Fax: 800/289-9150  
International  
Tel: 1-559/292-1981  
Fax: 1-559/348-1120  
ISO9001  
Australia Canada Finland France Germany Italy Macau The Netherlands Russia Singapore  
|
|
|
|
|
|
|
|
|
South Africa Spain Sweden United Arab Emirates United Kingdom United States  
|
|
|
|
|
 

Peavey Music Mixer 600 Mixer User Manual
Pelco TV Mount PMCL RM15 User Manual
Philips Network Card SWV3818 10 User Manual
Philips Portable Stereo System AQ6494 User Manual
Philips Universal Remote PM3 User Manual
Philips VCR RT30A User Manual
Pioneer Stereo System VSX 24TX User Manual
Planar Carbon Monoxide Alarm PS4200 User Manual
Poulan Lawn Mower PR22H48STA User Manual
PYLE Audio Music Pedal PPDLSM User Manual