Pelco Recording Equipment RMQ10T User Manual

C1997M (3/01)  
RMQ10T  
Rack Mount Kit  
®
IMPORTANT SAFEGUARDS AND WARNINGS  
Prior to installation and use of this product, the following WARNINGS should be observed.  
3500 Pelco Way  
Clovis, CA 93612-5699  
USA  
1. Installation and servicing should only be done by qualified service personnel and conform  
to all local codes.  
In North America & Canada:  
Tel (800) 289-9100  
FAX (800) 289-9150  
2. Only use replacement parts recommended by Pelco.  
International Customers:  
Tel +1(559) 292-1981  
FAX +1(559) 348-1120  
3. Use only installation methods and materials capable of supporting four times the maximum  
specified load.  
Please thoroughly familiarize yourself with the information in this manual prior to installation and  
operation.  
DESCRIPTION  
The RMQ10T Rack Mount Kit is designed to mount a single PMC10A, 10-inch monitor to any  
standard 19-inch (48.26 cm) wide console or rack configuration.  
The RMQ10T Rack Mount Kit contains the following parts:  
Qty Description  
2
2
8
8
4
4
4
4
Monitor mounting brackets  
Handles  
Nylon finishing washers (black)  
Screws,10-32 x .75-inch, Phillips, pan head (black)  
Screws,10-32 x .50-inch, Phillips, pan head  
#10 locking washers  
Screws, 4 x 12-mm, Phillips, pan head (black)  
#8 locking washers  
INSTALLATION  
To rack mount the PMC10A monitor, refer to Figure 1 and do the following:  
1. Disconnect the monitor from its power supply.  
2. Attach the handles to the mounting brackets using the four 10-32 x .50-inch screws and  
locking washers.  
3. Remove the two screws from the left side of the monitor and the two screws from the  
right side.  
4. Use the hardware supplied with the rack mount kit and attach the monitor mounting  
brackets to the sides of the monitor. Use two 4 x 12-mm screws, locking washers, and flat  
washers on each side.  
5. Use the eight supplied 10-32 x .75-inch black screws and finishing washers and mount the  
monitor assembly to a 19-inch (48.26 cm) rack or console. Installation of the monitor  
assembly may require two persons.  
6. Reconnect the monitor to its power supply.  
 

Pelco Camera Accessories SWM4 W User Manual
Philips Bottle Warmer SCF602 02 User Manual
Philips Car Video System 190CW7CS User Manual
Philips DVD Player VR740 58 User Manual
Philips VCR SCZ162AT User Manual
Pioneer CD Player DEH P44 User Manual
Pioneer Stereo System VSX 816 K User Manual
Polycom CRT Television V700 User Manual
Princeton Blower VM 502 User Manual
PYLE Audio Car Stereo System PL97M4 User Manual