Panasonic Network Card 2SC2480 User Manual

This product complies with the RoHS Directive (EU 2002/95/EC).  
Transistors  
2SC2480  
Silicon NPN epitaxial planar type  
For high-frequency amplification/oscillation/mixing  
Unit: mm  
+0.10  
–0.05  
0.40  
3
+0.10  
–0.06  
0.16  
Features  
High transition frequency fT  
Mini type package, allowing downsizing of the equipment and  
automatic insertion through the tape packing and the magazine  
packing  
1
2
(0.95) (0.95)  
1.9 0.1  
+0.20  
2.90  
–0.05  
Absolute Maximum Ratings Ta = 25°C  
10˚  
Parameter  
Symbol  
Rating  
Unit  
V
Collector-base voltage (Emitter open) VCBO  
Collector-emitter voltage (Base open) VCEO  
Emitter-base voltage (Collector open) VEBO  
30  
1: Base  
2: Emitter  
3: Collector  
20  
V
3
50  
V
JEITA: SC-59A  
Mini3-G1 Package  
Collector current  
IC  
PC  
Tj  
mA  
mW  
°C  
°C  
Collector power dissipation  
Junction temperature  
Storage temperature  
150  
Marking Symbol: R  
150  
Tstg  
55 to +150  
Electrical Characteristics Ta = 25°C 3°C  
Parameter  
Symbol  
VCBO  
VEBO  
VBE  
Conditions  
Min  
30  
3
Typ  
Max  
Unit  
V
Collector-base voltage (Emitter open)  
Emitter-base voltage (Collector open)  
Base-emitter voltage  
IC = 100 µA, IE = 0  
IE = 10 µA, IC = 0  
V
VCB = 10 V, IE = −2 mA  
VCB = 10 V, IE = −2 mA  
720  
mV  
Forward current transfer ratio  
Transition frequency *  
hFE  
25  
250  
fT  
VCB = 10 V, IE = −15 mA, f = 200 MHz 800  
1 300 1600  
0.8  
MHz  
pF  
Reverse transfer capacitance  
(Common base)  
Crb  
VCE = 6 V, IC = 0, f = 1 MHz  
Reverse transfer capacitance  
(Common emitter)  
Cre  
VCB = 10 V, IE = −1 mA, f = 10.7 MHz  
1.0  
1.5  
pF  
Power gain  
GP  
VCB = 10 V, IE = −1 mA, f = 200 MHz  
20  
dB  
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.  
2. : Rank classification  
*
Rank  
T
S
No-rank  
800 to 1400 1000 to 1600 800 to 1600  
RT RS  
fT  
Marking symbol  
R
Product of no-rank is not classified and have no indication for rank.  
Publication date: June 2006  
SJC00116CED  
1
 
This product complies with the RoHS Directive (EU 2002/95/EC).  
2SC2480  
Zrb IE  
GP IE  
NF IE  
12  
10  
8
120  
100  
80  
60  
40  
20  
0
40  
35  
30  
25  
20  
15  
10  
5
VCB = 10 V  
f = 2 MHz  
Ta = 25°C  
VCB = 10 V  
f = 100 MHz  
Rg = 50 kΩ  
Ta = 25°C  
VCB = 10 V  
f = 100 MHz  
Rg = 50 Ω  
Ta = 25°C  
6
4
2
0
0
0.1  
1  
10  
0.1  
1  
10  
100  
0.1  
1  
10  
100  
Emitter current IE (mA)  
Emitter current IE (mA)  
Emitter current IE (mA)  
bib gib  
brb grb  
bfb gfb  
48  
40  
32  
24  
16  
8
0
10  
20  
30  
40  
50  
60  
0
0.4  
0.8  
1.2  
1.6  
2.0  
2.4  
200  
yfb = gfb + jbfb  
VCB = 10 V  
yib = gib + jbib  
VCB = 10 V  
yrb = grb + jbrb  
VCB = 10 V  
300  
500  
f = 200 MHz  
IE = −5 mA  
IE = −2 mA  
f = 900 MHz  
300  
600  
2 mA  
5 mA  
500  
600  
600  
f = 900 MHz  
500  
300  
2 mA  
IE = −5 mA  
200  
900  
0
60  
0
10  
20  
30  
40  
50  
40  
20  
0
20  
40  
1.0 0.8 0.6 0.4 0.2  
0
Input conductance gib (mS)  
Forward transfer conductance gfb (mS)  
Reverse transfer conductance grb (mS)  
bob gob  
12  
10  
8
yob = gob + jbob  
900  
VCE = 10 V  
600  
IE = −2 mA  
5 mA  
500  
6
4
300  
2
f = 200 MHz  
0
0
0.4  
0.8  
1.2  
1.6  
2.0  
Output conductance gob (mS)  
SJC00116CED  
3
 
Request for your special attention and precautions in using the technical information and  
semiconductors described in this book  
(1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and  
regulations of the exporting country, especially, those with regard to security export control, must be observed.  
(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples  
of the products, and no license is granted under any intellectual property right or other right owned by our company or any other  
company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other  
company which may arise as a result of the use of technical information described in this book.  
(3) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office  
equipment, communications equipment, measuring instruments and household appliances).  
Consult our sales staff in advance for information on the following applications:  
Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support  
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-  
ucts may directly jeopardize life or harm the human body.  
Any applications other than the standard applications intended.  
(4) The products and product specifications described in this book are subject to change without notice for modification and/or im-  
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product  
Standards in advance to make sure that the latest specifications satisfy your requirements.  
(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions  
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute  
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any  
defect which may arise later in your equipment.  
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure  
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire  
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.  
(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,  
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which  
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.  
(7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita  
Electric Industrial Co., Ltd.  
 

Miele Freezer GT 316 ES User Manual
Mintek TV Cables SBC RU760 User Manual
MTX Audio Speaker T4154A User Manual
National Instruments Computer Accessories NI cDAQ 9172 User Manual
Niles Audio Power Supply AC 8CX User Manual
Niles Audio Stereo Amplifier COH40 User Manual
Nortel Networks Cordless Telephone T7208 User Manual
Omega Speaker Systems Thermometer 0707 User Manual
Onkyo Stereo Receiver TX SR444 User Manual
Palsonic Portable DVD Player DVD2040 User Manual