Kramer Electronics Satellite Radio TP 133 User Manual

KRAMER ELECTRONICS LTD.  
USER MANUAL  
MODELS:  
TP-133  
Automatic PC/Audio/Data Line  
Transmitter  
TP-134  
Automatic PC/Audio/Data Line  
Receiver  
P/N: 2900-300012 Rev 4  
 
1
Introduction  
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been  
providing a world of unique, creative, and affordable solutions to the vast range of  
problems that confront the video, audio, presentation, and broadcasting  
professional on a daily basis. In recent years, we have redesigned and upgraded  
most of our line, making the best even better!  
Our 1,000-plus different models now appear in 11 groups that are clearly defined  
by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Matrix  
Switchers; GROUP 3: Control Systems; GROUP 4: Format/Standards Converters;  
GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products;  
GROUP 7: Scan Converters and Scalers; GROUP 8: Cables and Connectors;  
GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack Adapters and  
GROUP 11: Sierra Products.  
Thank you for purchasing the Kramer MegaTOOLS® TP-133 Automatic  
PC/Audio/Data Line Transmitter or TP-134 Automatic PC/Audio/Data Line  
Receiver which are ideal for:  
Presentation and multimedia applications  
Long range graphics distribution for schools, hospitals, security and stores  
Each package includes the following items:  
TP-133 Automatic PC/Audio/Data Line Transmitter or TP-134 Automatic  
PC/Audio/Data Line Receiver  
Power adapter  
AD-GF/GF 15−pin HD (F/F) Gender Changer (with the TP-133)  
This user manual  
Download up-to-date Kramer user manuals from http://www.kramerelectronics.com  
TP-133/TP-134 - Introduction  
1
 
 
2
Getting Started  
We recommend that you:  
Unpack the equipment carefully and save the original box and packaging  
materials for possible future shipment  
Review the contents of this user manual  
Use Kramer high performance high resolution cables  
Go to http://www.kramerelectronics.com to check for up-to-date  
user manuals, application programs, and to check if firmware  
i
upgrades are available (where appropriate).  
Caution:  
Warning:  
No operator serviceable parts inside the unit  
!
Use only the Kramer Electronics input power wall  
adapter that is provided with the unit  
Warning:  
Disconnect the power and unplug the unit from the  
wall before installing  
2.1  
Achieving the Best Performance  
To achieve the best performance:  
Use only good quality connection cables to avoid interference, deterioration  
in signal quality due to poor matching, and elevated noise levels (often  
associated with low quality cables)  
Avoid interference from neighboring electrical appliances that may adversely  
influence signal quality  
Position your Kramer TP-133 and TP-134 away from moisture, excessive  
sunlight and dust  
2.2  
Shielded Twisted Pair/Unshielded Twisted Pair  
We recommend that you use Shielded Twisted Pair (STP) cable, and stress that  
the compliance to electromagnetic interference was tested using STP cable.  
There are different levels of STP cable available, and we advise you to use the  
best quality STP cable that you can afford. This pair of devices was designed for  
use with non-skew free cable, such as the Kramer BC-DGKat623.  
2
TP-133/TP-134 - Getting Started  
 
     
3
Overview  
The TP-133 and TP-134 are a high-performance, TP (Twisted Pair) transmitter  
and receiver for transmitting computer graphics video, balanced/unbalanced  
stereo audio and bidirectional RS-232 data signals over extended distances using  
CAT 5/6 cable. The TP-133 and TP-134 together form an extended computer  
graphics/audio/data line transmission and reception system. The TP-133 converts  
computer graphics video, balanced/unbalanced stereo audio and RS-232 data into  
a TP signal. The TP-134 converts the TP signal back into computer graphics  
video, balanced/unbalanced stereo audio and RS-232 data. More specifically, the  
TP-133 and TP-134 support:  
Video resolution up to WUXGA 1920 x 1200  
Automatic EQ Compensation - automatically detects and compensates for  
the EQ losses in the TP cable. Can also be set manually (TP-134)  
Automatic Skew Correction - automatically detects and corrects the  
differential delay in the R, G & B color components due to the TP cable. Can  
also be set manually (TP-134)  
Full duplex, bidirectional RS-232 transmission  
Increased level of protection against noise, spikes and interference in  
adverse environments  
Transmission range of up to 200m (656ft)  
Cable - for optimum range and performance, use Kramer's BC-DGKat524,  
BC−DGKat623 and BC−DGKat7a23 cables. Note that the transmission range  
depends on the signal resolution, graphics card and display used. The distance  
using non−Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges.  
Use only shielded cable where both ends of the shield are soldered to ground  
Control - Skew: auto or manual (R, G & B); equalization (peaking): auto or  
manual  
Built in Test Pattern Generator for manually setting R, G & B skew and  
equalization  
Compact MegaTOOLS™ - 2 units can be rack mounted side−by−side in a  
1U rack space with the optional RK−T2B universal rack adapter  
TP-133/TP-134 - Overview  
3
 
 
4
Defining the TP-133/TP-134 Line Transmitter  
and Receiver  
This section defines the:  
TP-133 Automatic PC/Audio/Data Line Transmitter (see Section 4.1)  
TP-134 Automatic PC/Audio/Data Line Receiver (see Section 4.2)  
4.1  
Defining the TP-133 Automatic PC/Audio/Data Line  
Transmitter  
The TP-133 is a high-performance transmitter that accepts the following signals:  
Computer graphics video  
Balanced and unbalanced stereo audio  
RS-232 data  
The TP-133 encodes the signals and transmits them over TP cable to a TP-134  
receiver. RS-232 commands and data flow bidirectionally, allowing status requests  
and control of a destination unit.  
Figure 1 defines the front and rear panels of the TP-133.  
Figure 1: TP-133 Automatic PC/Audio/Data Line Transmitter Front and Rear Panels  
4
TP-133/TP-134 - Defining the TP-133/TP-134 Line Transmitter and Receiver  
 
     
#
Feature  
Function  
1
PC IN 15-pin HD  
Connect to a computer graphics video source  
Connector (M)  
2
3
AUDIO IN 3.5mm Mini  
Jack  
Connect to an unbalanced, stereo audio source  
Connect to the RS-232 device (PC or controller)  
Lights red when the unit receives power  
RS-232 9-pin D-sub  
Connector (F)  
4
5
POWER LED  
5.3V DC Power  
Connector  
Connect to one of the supplied +5.3V DC power adapters.  
Center pin positive  
6
BAL. AUDIO IN 5-pin  
Connect to a balanced, stereo audio source  
Terminal Block  
7
BAL. AUDIO OUT 5-pin  
Connect to a balanced, stereo audio acceptor (loop output),  
Terminal Block  
see Section 5.1  
8
AUDIO OUT 3.5mm Mini  
Connect to an unbalanced, stereo audio acceptor (loop  
Jack  
output)  
9
LINE OUT RJ-45  
Connect to the LINE IN RJ-45 connector on the TP-134,  
Connector  
see Section 5.2  
10  
PC VIDEO OUT 15-pin  
Connect to a computer graphics monitor (loop output)  
HD Connector (F)  
4.2  
Defining the TP-134 Automatic PC/Audio/Data Line  
Receiver  
The TP-134 is a high-performance receiver that accepts the computer  
graphics/audio/RS-232 data from the Kramer TP-133 via TP cabling at its RJ-45  
LINE IN input. The TP-134 outputs a computer graphics signal, an unbalanced  
stereo audio signal, a balanced stereo audio signal and RS 232 data signal.  
In addition, the TP-134 features color skew and equalization control for the video  
signal.  
Figure 2 defines the TP-134.  
TP-133/TP-134 - Defining the TP-133/TP-134 Line Transmitter and Receiver  
5
 
 
Figure 2: TP-134 Automatic PC/Audio/Data Line Transmitter Front and Rear Panels  
#
Feature  
Function  
1
RS-232 9-pin D-sub  
Connect to the controlled RS-232 device (monitor)  
Connector (M)  
2
3
COLOR / + Button  
Press to enter the setting mode (see Section 6).  
Press and hold together with the SELECT button to trigger the auto-  
adjust function  
SELECT / – Button  
Press to select the setting to change (see Section 6).  
Press and hold together with the COLOR button to trigger the auto-  
adjust function  
4
5
BLUE LED  
Flashes to indicate that the blue color setting is selected  
LINK / GREEN LED  
Lights orange to indicate that the TP link is established  
Flashes orange to indicate that there is a link problem  
Flashes green to indicate that the green color is selected  
6
POWER / RED LED  
Lights green to indicate that the device is receiving power  
Flashes red to indicate that the red color is selected  
Flashes red together with the GREEN LED flashing green) to  
indicate that the equalization setting is selected  
7
5.3V DC Power  
Connector  
Connect to one of the supplied +5.3V DC power adapters. Center  
pin positive  
8
BAL. AUDIO OUT 5-pin  
Connect to a balanced, stereo audio acceptor (see Section 5.1)  
Terminal Block  
9
AUDIO OUT 3.5mm Mini  
Connect to an unbalanced, stereo audio acceptor  
Jack  
10  
11  
LINE IN RJ-45 Connector  
Connect to the LINE OUT RJ-45 connector on the TP-133 (see  
Section 5.2)  
PC VIDEO OUT 15-pin  
Connect to a computer graphics video acceptor  
HD Connector (F)  
6
TP-133/TP-134 - Defining the TP-133/TP-134 Line Transmitter and Receiver  
 
 
5
Connecting the TP-133/TP-134  
After connecting your TP-133 and TP-134, connect the power  
adapters.  
i
Figure 3: Connecting the TP-133/TP-134 PC/Audio/Data Line Transmitter/Receiver System  
TP-133/TP-134 - Connecting the TP-133/TP-134  
7
 
   
To connect the TP-133 and the TP-134 to create a TP transmitter and  
receiver system as illustrated in Figure 3:  
1. On the TP-133, connect:  
.
.
.
.
.
A computer graphics video source (for example, the graphics card on a  
laptop) to the PC IN 15-pin HD connector (M)  
An unbalanced, stereo audio source (for example, the audio source on  
the computer graphics station) to the AUDIO IN 3.5mm mini jack  
The RS-232 device, for example, PC or controller with an RS-232  
interface to the RS-232 9-pin D-sub connector (F)  
The balanced, stereo audio source (for example, a DAT-Player) to the  
BAL AUDIO IN 5-pin terminal block  
If needed, connect a computer monitor and audio  
amplifier/loudspeakers to the looping VGA/audio outputs (not shown in  
Figure 3)  
2. On the TP-134, connect the:  
.
.
.
.
BAL AUDIO OUT 5-pin terminal block to the balanced, stereo audio  
acceptor (for example, an amplifier)  
AUDIO OUT 3.5mm mini jack to the unbalanced, stereo audio  
acceptor (for example, an AV display system)  
PC VIDEO OUT 15-pin HD (F) connector to the video acceptor (for  
example, an AV display system)  
RS-232 9-pin D-sub connector (M) to the controlled device with an  
RS-232 interface  
3. Using STP cabling, connect the LINE OUT RJ-45 connector on the TP-133  
to the LINE IN RJ-45 connector on the TP-134 (see Section 5.2).  
4. Connect the power adapters to the power sockets on the TP-133 and  
TP-134, and connect the adapters to the mains electricity (not shown in  
Figure 3).  
8
TP-133/TP-134 - Connecting the TP-133/TP-134  
 
5.1  
Connecting the Audio Output to Balanced and  
Unbalanced Audio Equipment  
Figure 4 illustrates how to connect the TP-133/TP-134 balanced audio output to a  
balanced acceptor.  
Figure 4: Connecting to a Balanced Acceptor  
Figure 5 illustrates how to connect the TP-133/TP-134 balanced audio output to  
an unbalanced acceptor.  
Figure 5: Connecting to an Unbalanced Acceptor  
5.2  
Wiring the TP RJ-45 Connectors  
When using STP cable, connect/solder the cable shield to the RJ-45 connector  
shield. Figure 6 defines the TP pinout using a straight pin-to-pin cable with RJ-45  
connectors.  
Figure 6: CAT 5 Pinout  
EIA /TIA 568B  
PIN  
Wire Color  
1
Orange / White  
Orange  
2
3
4
5
6
7
8
Green / White  
Blue  
Blue / White  
Green  
Brown / White  
Brown  
Pair 1 4 and 5  
Pair 2 1 and 2  
Pair 3 3 and 6  
Pair 4 7 and 8  
TP-133/TP-134 - Connecting the TP-133/TP-134  
9
 
         
6
Adjusting RGB and Compensation on the  
TP-134  
The skew and equalization can be set either manually or automatically.  
After connecting the TP-133/TP-134 to the power adapters (assuming that the  
twisted pair link is working), the LINK and POWER LEDs on the front of the  
TP-134 light green.  
Note: During any setup, the process times-out after 10 seconds and the device  
returns to normal operation.  
6.1  
Setting the Skew and Equalization Manually  
The color and equalization can be set either with the live signal or using the built-  
in pattern generator.  
6.1.1  
Setting the Skew and Equalization Manually (Using a Live  
Signal)  
To set the color and equalization using a live signal:  
1. Press the COLOR button briefly.  
The RED LED flashes red.  
2. To change the red gain, press the + or – button to increase or decrease the  
gain respectively.  
3. To move to the green setting, press and hold the COLOR button for three  
seconds.  
The GREEN LED flashes green.  
4. To change the green gain, press the + or – button to increase or decrease  
the gain respectively.  
5. To move to the blue setting, press and hold the COLOR button for three  
seconds.  
The BLUE LED flashes blue.  
10  
TP-133/TP-134 - Adjusting RGB and Compensation on the TP-134  
 
   
6. To change the blue setting, press the + or – button to increase or decrease  
the gain respectively.  
7. To move to the equalization setting, press and hold the COLOR button for  
three seconds.  
The RED LED flashes red and the GREEN LED flashes green together.  
8. To change the equalization, press the + or – button to increase or decrease  
the blue gain respectively.  
9. To return to normal operation, either wait 10 seconds for the time-out or  
press and hold the COLOR button for three seconds.  
The LINK and POWER LEDs light green.  
6.1.2  
Setting the Skew and Equalization Using the Built-in Pattern  
Generator  
To set the color and equalization using the built-in pattern generator:  
1. Press and hold the COLOR button for three seconds.  
The RED LED flashes red and the OSD pattern is displayed with a broad,  
red, horizontal band across the bottom to indicate the current setting.  
2. To change the red gain, press the + or – button to increase or decrease the  
gain respectively.  
The effect is seen in the red vertical bars shifting to the left or right.  
3. To move to the green setting, press and hold the COLOR button for three  
seconds.  
The GREEN LED flashes green and the OSD pattern is displayed with a  
broad, green, horizontal band across the bottom to indicate the current  
setting.  
4. To change the green gain, press the + or – button to increase or decrease  
the gain respectively.  
The effect is seen in the green vertical bars shifting to the left or right.  
5. To move to the blue setting, press and hold the COLOR button for three  
seconds.  
TP-133/TP-134 - Adjusting RGB and Compensation on the TP-134  
11  
 
The BLUE LED flashes blue and the OSD pattern is displayed with a broad,  
blue, horizontal band across the bottom to indicate the current setting.  
6. To change the blue setting, press the + or – button to increase or decrease  
the gain respectively.  
The effect is seen in the red vertical bars shifting to the left or right.  
7. To move to the equalization setting, press and hold the COLOR button for  
three seconds.  
The RED LED flashes red and the GREEN LED flashes green together. The  
OSD pattern is displayed with no horizontal band across the bottom to  
indicate the current setting.  
8. To change the equalization, press the + or – button to increase or decrease  
the blue gain respectively.  
The effect is seen in the four vertical white bars becoming blurred on the left  
or right hand side of each bar.  
9. To return to normal operation, either wait 10 seconds for the time-out or  
press and hold the COLOR button for three seconds.  
The LINK and POWER LEDs light green.  
6.2  
Setting the Skew and Equalization Automatically  
To adjust the color skew on the TP-134:  
Press and hold the COLOR and SELECT buttons together for three  
seconds.  
The color and equalization are set automatically.  
12  
TP-133/TP-134 - Adjusting RGB and Compensation on the TP-134  
 
 
7
Technical Specifications  
TP-133  
TP-134  
INPUTS:  
Video: 1 Computer graphics on a  
15-pin HD connector  
Communication: 1 LINE IN on an  
RJ-45 connector  
Audio: 1 Unbalanced stereo audio  
on a 3.5mm mini jack  
1 Balanced stereo audio on a  
5-pin terminal block  
Data: 1 RS-232 bidirectional on a  
9-pin D-sub connector  
OUTPUTS:  
Video Loop: 1 Computer graphics  
Video: 1 Computer graphics on a  
on a 15-pin HD connector  
15-pin HD connector  
Audio Loop: 1 Balanced stereo  
audio on a 5-pin terminal block, 1  
Unbalanced stereo audio on a  
3.5mm mini jack  
Audio: 1 Balanced stereo audio  
on a 5-pin terminal block,  
1 Unbalanced stereo audio on a  
3.5mm mini jack  
Communication: 1 RJ-45 LINE  
OUT on an RJ-45 connector  
Data: 1 RS-232 bidirectional on a  
9-pin D-sub connector  
CONTROLS:  
Skew/Equalization  
VIDEO RESOLUTION:  
MAX. OUTPUT LEVEL:  
Up to WUXGA  
Video: 1.1V  
Audio: 2.2V  
BANDWIDTH: Audio: 20–20kHz @-3dB  
S/N RATIO:  
COUPLING:  
TND+N:  
Audio: 84dB/unweighted  
AC  
AUDIO:  
RS-232:  
Audio: 0.02% unweighted  
Up to 115200bps  
Full-duplex  
BAUD RATE:  
MODE:  
POWER SOURCE:  
5.3V DC 450mA  
Up to 200m (656ft)  
5.3V DC 760mA  
TRANSMISSION  
DISTANCE:  
OPERATING  
0° to +55°C (32° to 131°F)  
TEMPERATURE:  
STORAGE  
45° to +72°C (49° to 162°F)  
TEMPERATURE:  
HUMIDITY:  
10% to 90%, RHL non-condensing  
DIMENSIONS:  
WEIGHT:  
19.05cm x 8.63cm x 2.44cm (7.5" x 3.4" x 0.96") W, D, H  
0.33kg (0.73lbs.) approx. each  
ACCESSORIES:  
Power supply, AD-GF/GF 15−pin  
Power supply  
HD (F/F) Gender Changer  
OPTIONS:  
RK-T2B 19” rack adapter, Kramer BC-DGKat623  
TP-133/TP-134 - Technical Specifications  
13  
 
 
LIMITED WARRANTY  
We warrant this product free from defects in materialand workmanship under the following terms.  
HOW LONG IS THE WARRANTY  
Labor and parts are warranted for seven years from the date of the first customer purchase.  
WHO IS PROTECTED?  
Only the first purchase customer may enforce this warranty.  
WHATIS COVEREDANDWHATIS NOT COVERED  
Except as below, this warranty covers all defects in material or workmanship in this product. The following are not  
covered by thewarranty:  
1. Any product which is not distributed by us or which is not purchased from an authorized Kramer dealer. If you are  
uncertain as to whether a dealer is authorized, please contact Kramer at one of the agents listed in the Web site  
2. Any product, on which the serial number has been defaced, modified or removed, or on which the WARRANTY VOID  
IF TAMPERED sticker has been torn, reattached, removed or otherwise interfered with.  
3. Damage, deterioration ormalfunctionresultingfrom:  
i) Accident, misuse, abuse, neglect, fire, water, lightningorotheracts of nature  
ii) Product modification, orfailure to follow instructions supplied withtheproduct  
iii) Repair orattemptedrepairby anyone not authorized by Kramer  
iv) Any shipment of theproduct (claims must bepresentedtothe carrier)  
v) Removal orinstallation of theproduct  
vi) Any other cause, which does not relate to aproduct defect  
vii) Cartons, equipment enclosures, cables or accessories used inconjunction withtheproduct  
WHATWE WILLPAYFORANDWHATWE WILLNOT PAY FOR  
We will pay labor andmaterialexpenses for covered items. We willnot pay for the following:  
1. Removalor installations charges.  
2. Costs of initial technical adjustments (set-up), including adjustment of user controls or programming. These costs are  
theresponsibility of the Kramer dealer from whom theproduct was purchased.  
3. Shipping charges.  
HOW YOU CAN GET WARRANTY SERVICE  
1. To obtain service on you product, you must take or ship it prepaid to any authorized Kramer service center.  
2. Whenever warranty service is required, the original dated invoice (or a copy) must be presented as proof of  
warranty coverage, and should be included in any shipment of the product. Please also include in any mailing a  
contact name, company, address, and a description of the problem(s).  
3. For the name of the nearest Kramer authorized service center, consult your authorized dealer.  
LIMITATIONOFIMPLIEDWARRANTIES  
All implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited in duration  
to the length of this warranty.  
EXCLUSIONOF DAMAGES  
The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer  
shallnot be liable for:  
1. Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the  
product, loss of time, commercialloss; or:  
2. Any other damages, whether incidental, consequential or otherwise. Some countries may not allow limitations on  
how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential  
damages, so the above limitations and exclusions may not apply to you.  
This warranty gives you specific legal rights, andyou may also have otherrights, which vary from place toplace.  
NOTE:Allproducts returned to Kramerforservice must haveprior approval.This may beobtained from your dealer.  
This equipment has been tested to determine compliancewiththerequirements of:  
EN-50081:  
"Electromagnetic compatibility (EMC);  
generic emission standard.  
Part 1: Residential, commercialand light industry"  
"Electromagnetic compatibility (EMC) generic immunity standard.  
Part 1: Residential, commercialand light industry environment".  
FCC* Rules and Regulations:  
EN-50082:  
CFR-47:  
Part 15: “Radio frequency devices  
Subpart B Unintentional radiators”  
CAUTION!  
Servicing the machines can only be done by an authorized Kramer technician. Any user who makes changes or  
modifications to the unit without the expressed approval of the manufacturer will void user authority to operate the  
equipment.  
Use the suppliedDC powersupply to feedpower to the machine.  
Pleaseuse recommendedinterconnectioncables toconnect the machine to othercomponents.  
* FCC andCEapprovedusing STPcable(for twisted pair products)  
14  
TP-133/TP-134 - Technical Specifications  
 
2º‡ÍÏ•âÍØ]Ïâ„ÏÍ®∏ñº‡≥]Ï®º∏ͺͺı‡ÍÀ‡ºÄıuÏ„Í]∏ÄÍ]ÍØ®„ÏͺñÍ;‡]≥â‡ÍÄ®„χ®kıϺ‡„|Í  
˚®„®Ïͺı‡ÍV âkÍ„®Ïâ͸•â‡âÍıÀÄ]Ïâ„ÍϺÍÏ•®„Íı„â‡Í≥]∏ı]ØÍ≥]˛ÍkâÍñºı∏Ä–Í  
V â͸âØuº≥âͲºı‡Í’ıâ„Ï®º∏„|Íuº≥≥â∏Ï„|Í]∏ÄÍñââÄk]uÆ–Í  
L 2,NXÍV K?5?3  
+®„uº∏∏âuÏÍÏ•âÍı∏®ÏÍñ‡º≥ÍÏ•âÍÀº¸â‡  
!
„ıÀÀØ˛Íkâñº‡âͺÀâ∏®∏ùÍ]∏ÄÍ„â‡˚®u®∏ù  
2900- 300012  
4
P/N:  
Rev:  
 

Indesit Range KD3G2 G User Manual
Jeep VCR 50 0283x 017 SERIES User Manual
Jonsered Lawn Mower LT2220 CMA2 User Manual
JVC Car Video System KD R400 User Manual
JVC Exercise Bike CU V803 User Manual
JVC Speaker System CA UXH10 User Manual
JVC Speaker System MX KB1 MX KB2 User Manual
JVC Stereo System CA MXJ150R User Manual
JVC Stereo System CA MXJ330 User Manual
Kentrox Network Router Q2300 User Manual